Arduino/hardware/arduino/sam/variants/arduino_due_x/variant.h

/*
  Copyright (c) 2011 Arduino.  All right reserved.

  This library is free software; you can redistribute it and/or
  modify it under the terms of the GNU Lesser General Public
  License as published by the Free Software Foundation; either
  version 2.1 of the License, or (at your option) any later version.

  This library is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  See the GNU Lesser General Public License for more details.

  You should have received a copy of the GNU Lesser General Public
  License along with this library; if not, write to the Free Software
  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
*/

#ifndef _VARIANT_ARDUINO_DUE_X_
#define _VARIANT_ARDUINO_DUE_X_

/*----------------------------------------------------------------------------
 *        Headers
 *----------------------------------------------------------------------------*/

#include "Arduino.h"
#ifdef __cplusplus
#include "UARTClass.h"
#include "USARTClass.h"
#endif

#ifdef __cplusplus
extern "C"{
#endif // __cplusplus

/**
 * Libc porting layers
 */
#if defined (  __GNUC__  ) /* GCC CS3 */
#    include <syscalls.h> /** RedHat Newlib minimal stub */
#endif

/*----------------------------------------------------------------------------
 *        Definitions
 *----------------------------------------------------------------------------*/

/*----------------------------------------------------------------------------*/

#define ArduinoDueX_DevEd

/** Name of the board */
#define VARIANT_NAME		"Arduino_DueX_Dev_Ed"

/** Frequency of the board main oscillator */
#define VARIANT_MAINOSC		12000000

/** Master clock frequency */
#define VARIANT_MCK			84000000

/*----------------------------------------------------------------------------
 *        Pins
 *----------------------------------------------------------------------------*/

// Number of pins defined in PinDescription array
#define PINS_COUNT           (88u)

// LEDs
#define PIN_LED_13           (13u)
#define PIN_LED_RXL          (72u)
#define PIN_LED_TXL          (73u)
#define PIN_LED              PIN_LED_13
#define PIN_LED2             PIN_LED_RXL
#define PIN_LED3             PIN_LED_TXL

/*
 * SPI Interfaces
 */
#define SPI_INTERFACES_COUNT 1

#define SPI_INTERFACE        SPI0
#define SPI_INTERFACE_ID     ID_SPI0
#define SPI_CHANNELS_NUM 4
#define PIN_SPI_SS0          (77u)
#define PIN_SPI_SS1          (87u)
#define PIN_SPI_SS2          (86u)
#define PIN_SPI_SS3          (78u)
#define PIN_SPI_MOSI         (75u)
#define PIN_SPI_MISO         (74u)
#define PIN_SPI_SCK          (76u)
#define BOARD_SPI_SS0        (10u)
#define BOARD_SPI_SS1        (4u)
#define BOARD_SPI_SS2        (52u)
#define BOARD_SPI_SS3        PIN_SPI_SS3
#define BOARD_SPI_DEFAULT_SS BOARD_SPI_SS2

#define BOARD_PIN_TO_SPI_PIN(x) \
	(x==BOARD_SPI_SS0 ? PIN_SPI_SS0 : \
	(x==BOARD_SPI_SS1 ? PIN_SPI_SS1 : \
	(x==BOARD_SPI_SS2 ? PIN_SPI_SS2 : PIN_SPI_SS3 )))
#define BOARD_PIN_TO_SPI_CHANNEL(x) \
	(x==BOARD_SPI_SS0 ? 0 : \
	(x==BOARD_SPI_SS1 ? 1 : \
	(x==BOARD_SPI_SS2 ? 2 : 3)))

static const uint8_t SS   = BOARD_SPI_SS0 ;
static const uint8_t SS1  = BOARD_SPI_SS1 ;
static const uint8_t SS2  = BOARD_SPI_SS2 ;
static const uint8_t SS3  = BOARD_SPI_SS3 ;
static const uint8_t MOSI = PIN_SPI_MOSI ;
static const uint8_t MISO = PIN_SPI_MISO ;
static const uint8_t SCK  = PIN_SPI_SCK ;

/*
 * Wire Interfaces
 */
#define WIRE_INTERFACES_COUNT 2

#define PIN_WIRE_SDA         (20u)
#define PIN_WIRE_SCL         (21u)
#define WIRE_INTERFACE       TWI1
#define WIRE_INTERFACE_ID    ID_TWI1
#define WIRE_ISR_HANDLER     TWI1_IrqHandler

#define PIN_WIRE1_SDA        (70u)
#define PIN_WIRE1_SCL        (71u)
#define WIRE1_INTERFACE      TWI0
#define WIRE1_INTERFACE_ID   ID_TWI0
#define WIRE1_ISR_HANDLER    TWI0_IrqHandler

/*
 * UART/USART Interfaces
 */
#define PINS_UART            (81u)

#define PINS_USART0          (82u)
#define PINS_USART1          (83u)
#define PINS_USART2          (84u)

/*
 * USB Interfaces
 */
#define PINS_USB             (85u)

/*
 * Analog pins
 */
static const uint8_t A0  = 54;
static const uint8_t A1  = 55;
static const uint8_t A2  = 56;
static const uint8_t A3  = 57;
static const uint8_t A4  = 58;
static const uint8_t A5  = 59;
static const uint8_t A6  = 60;
static const uint8_t A7  = 61;
static const uint8_t A8  = 62;
static const uint8_t A9  = 63;
static const uint8_t A10 = 64;
static const uint8_t A11 = 65;
static const uint8_t DA0 = 66;
static const uint8_t DA1 = 67;
static const uint8_t CANRX0 = 68;
static const uint8_t CANTX0 = 69;
#define ADC_RESOLUTION		12

/*
 * DACC
 */
#define DACC_INTERFACE		DACC
#define DACC_INTERFACE_ID	ID_DACC
#define DACC_RESOLUTION		12
#define DACC_ISR_HANDLER    DACC_Handler
#define DACC_ISR_ID         DACC_IRQn

/*
 * PWM
 */
#define PWM_INTERFACE		PWM
#define PWM_INTERFACE_ID	ID_PWM
#define PWM_FREQUENCY		1000
#define PWM_MAX_DUTY_CYCLE	255
#define PWM_MIN_DUTY_CYCLE	0
#define PWM_RESOLUTION		8

/*
 * TC
 */
#define TC_INTERFACE        TC0
#define TC_INTERFACE_ID     ID_TC0
#define TC_FREQUENCY        1000
#define TC_MAX_DUTY_CYCLE   255
#define TC_MIN_DUTY_CYCLE   0
#define TC_RESOLUTION		8

#ifdef __cplusplus
}
#endif

/*----------------------------------------------------------------------------
 *        Arduino objects - C++ only
 *----------------------------------------------------------------------------*/

#ifdef __cplusplus

extern UARTClass Serial1 ;

extern USARTClass Serial2 ;
extern USARTClass Serial3 ;
extern USARTClass Serial4 ;

#endif

#endif /* _VARIANT_ARDUINO_DUE_X_ */