1
0
mirror of https://github.com/arduino/Arduino.git synced 2024-12-13 23:48:46 +01:00
Arduino/libraries/Ethernet/examples/ChatServer/ChatServer.pde

63 lines
1.7 KiB
Plaintext
Raw Normal View History

2008-07-30 16:47:36 +02:00
/*
2010-08-13 18:13:46 +02:00
Chat Server
A simple server that distributes any incoming messages to all
connected clients. To use telnet to your device's IP address and type.
You can see the client's input in the serial monitor as well.
Using an Arduino Wiznet Ethernet shield.
Circuit:
* Ethernet shield attached to pins 10, 11, 12, 13
* Analog inputs attached to pins A0 through A5 (optional)
created 18 Dec 2009
by David A. Mellis
modified 10 August 2010
by Tom Igoe
2008-07-30 16:47:36 +02:00
*/
#include <SPI.h>
2008-07-30 16:47:36 +02:00
#include <Ethernet.h>
// Enter a MAC address and IP address for your controller below.
// The IP address will be dependent on your local network.
// gateway and subnet are optional:
2008-07-30 16:47:36 +02:00
byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
byte ip[] = { 192,168,1, 177 };
byte gateway[] = { 192,168,1, 1 };
2008-07-30 16:47:36 +02:00
byte subnet[] = { 255, 255, 0, 0 };
// telnet defaults to port 23
Server server(23);
boolean gotAMessage = false; // whether or not you got a message from the client yet
2008-07-30 16:47:36 +02:00
void setup() {
2008-07-30 16:47:36 +02:00
// initialize the ethernet device
Ethernet.begin(mac, ip, gateway, subnet);
// start listening for clients
server.begin();
// open the serial port
Serial.begin(9600);
2008-07-30 16:47:36 +02:00
}
void loop() {
// wait for a new client:
2008-07-30 16:47:36 +02:00
Client client = server.available();
// when the client sends the first byte, say hello:
2008-07-30 16:47:36 +02:00
if (client) {
if (!gotAMessage) {
Serial.println("We have a new client");
client.println("Hello, client!");
gotAMessage = true;
}
// read the bytes incoming from the client:
char thisChar = client.read();
// echo the bytes back to the client:
server.write(thisChar);
// echo the bytes to the server as well:
Serial.print(thisChar);
2008-07-30 16:47:36 +02:00
}
}