1
0
mirror of https://github.com/arduino/Arduino.git synced 2024-12-04 15:24:12 +01:00
Arduino/hardware/arduino/avr/libraries/GSM/examples/Tools/TestWebServer/TestWebServer.ino

86 lines
1.8 KiB
Arduino
Raw Normal View History

2013-03-11 12:17:08 +01:00
/*
Basic Web Server
A simple web server that replies with nothing, but prints the client's request
and the server IP address.
Circuit:
* GSM shield attached
created
by David Cuartielles
modified 21 Nov 2012
by Tom Igoe
http://arduino.cc/en/Tutorial/GSMToolsTestWebServer
This example code is part of the public domain
*/
#include <GSM.h>
// PIN Number
#define PINNUMBER ""
// APN data
#define GPRS_APN "GPRS_APN" // replace your GPRS APN
#define GPRS_LOGIN "login" // replace with your GPRS login
#define GPRS_PASSWORD "password" // replace with your GPRS password
// initialize the library instance
GPRS gprs;
GSM gsmAccess; // include a 'true' parameter for debug enabled
GSMServer server(80); // port 80 (http default)
// timeout
const unsigned long __TIMEOUT__ = 10*1000;
void setup()
{
// initialize serial communications and wait for port to open:
Serial.begin(9600);
while (!Serial) {
; // wait for serial port to connect. Needed for Leonardo only
}
Serial.println("starting,..");
// connection state
boolean connected = true;
// Start GSM shield
// If your SIM has PIN, pass it as a parameter of begin() in quotes
while(!connected)
{
if((gsmAccess.begin(PINNUMBER)==GSM_READY) &
(gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD)==GPRS_READY))
connected = true;
else
{
Serial.println("Not connected");
delay(1000);
}
}
Serial.println("Connected to GPRS network");
// start server
server.begin();
//Get IP.
IPAddress LocalIP = gprs.getIPAddress();
Serial.println("Server IP address=");
Serial.println(LocalIP);
}
void loop(){
GSMClient client = server.available();
if (client) {
if (client.available()) {
Serial.write(client.read());
}
}
}