1
0
mirror of https://github.com/arduino/Arduino.git synced 2024-12-12 23:08:52 +01:00
Arduino/build/shared/examples/10.StarterKit/p06_LightTheremin/p06_LightTheremin.ino

65 lines
1.4 KiB
Arduino
Raw Normal View History

2012-10-12 19:23:48 +02:00
/*
Arduino Starter Kit example
Project 6 - Light Theremin
2012-10-12 19:23:48 +02:00
This sketch is written to accompany Project 6 in the
Arduino Starter Kit
2012-10-12 19:23:48 +02:00
Parts required:
photoresistor
10 kilohm resistor
2012-10-12 19:23:48 +02:00
piezo
2012-10-12 19:23:48 +02:00
Created 13 September 2012
by Scott Fitzgerald
http://www.arduino.cc/starterKit
This example code is part of the public domain
2012-10-12 19:23:48 +02:00
*/
// variable to hold sensor value
int sensorValue;
// variable to calibrate low value
int sensorLow = 1023;
// variable to calibrate high value
int sensorHigh = 0;
// LED pin
const int ledPin = 13;
void setup() {
// Make the LED pin an output and turn it on
pinMode(ledPin, OUTPUT);
digitalWrite(ledPin, HIGH);
// calibrate for the first five seconds after program runs
while (millis() < 5000) {
// record the maximum sensor value
sensorValue = analogRead(A0);
if (sensorValue > sensorHigh) {
sensorHigh = sensorValue;
}
// record the minimum sensor value
if (sensorValue < sensorLow) {
sensorLow = sensorValue;
}
}
// turn the LED off, signaling the end of the calibration period
digitalWrite(ledPin, LOW);
}
void loop() {
//read the input from A0 and store it in a variable
sensorValue = analogRead(A0);
// map the sensor values to a wide range of pitches
int pitch = map(sensorValue, sensorLow, sensorHigh, 50, 4000);
// play the tone for 20 ms on pin 8
tone(8, pitch, 20);
// wait for a moment
delay(10);
}