diff --git a/build/windows/dist/drivers/Arduino Esplora.inf b/build/windows/dist/drivers/Arduino Esplora.inf
deleted file mode 100644
index ae1f5cc08..000000000
--- a/build/windows/dist/drivers/Arduino Esplora.inf	
+++ /dev/null
@@ -1,107 +0,0 @@
-;************************************************************
-; Windows USB CDC ACM Setup File
-; Copyright (c) 2000 Microsoft Corporation
-
-
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%MFGNAME%
-LayoutFile=layout.inf
-CatalogFile=%MFGFILENAME%.cat
-DriverVer=11/15/2007,5.1.2600.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTamd64
-
-[DestinationDirs]
-DefaultDestDir=12
-
-
-;------------------------------------------------------------------------------
-;  Windows 2000/XP/Vista-32bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.nt]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.nt
-AddReg=DriverInstall.nt.AddReg
-
-[DriverCopyFiles.nt]
-usbser.sys,,,0x20
-
-[DriverInstall.nt.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[DriverInstall.nt.Services]
-AddService=usbser, 0x00000002, DriverService.nt
-
-[DriverService.nt]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-;------------------------------------------------------------------------------
-;  Vista-64bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.NTamd64]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.NTamd64
-AddReg=DriverInstall.NTamd64.AddReg
-
-[DriverCopyFiles.NTamd64]
-%DRIVERFILENAME%.sys,,,0x20
-
-[DriverInstall.NTamd64.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[DriverInstall.NTamd64.Services]
-AddService=usbser, 0x00000002, DriverService.NTamd64
-
-[DriverService.NTamd64]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-
-;------------------------------------------------------------------------------
-;  Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID.  Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[SourceDisksFiles]
-[SourceDisksNames]
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_003C
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_803C&MI_00
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_003C
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_803C&MI_00
-
-;------------------------------------------------------------------------------
-;  String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGFILENAME="CDC_vista"
-DRIVERFILENAME ="usbser"
-MFGNAME="Arduino LLC (www.arduino.cc)"
-INSTDISK="Arduino Esplora Driver Installer"
-DESCRIPTION="Arduino Esplora"
-SERVICE="USB RS-232 Emulation Driver"
\ No newline at end of file
diff --git a/build/windows/dist/drivers/Arduino Leonardo.inf b/build/windows/dist/drivers/Arduino Leonardo.inf
deleted file mode 100644
index 26cf22fb8..000000000
--- a/build/windows/dist/drivers/Arduino Leonardo.inf	
+++ /dev/null
@@ -1,107 +0,0 @@
-;************************************************************
-; Windows USB CDC ACM Setup File
-; Copyright (c) 2000 Microsoft Corporation
-
-
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%MFGNAME%
-LayoutFile=layout.inf
-CatalogFile=%MFGFILENAME%.cat
-DriverVer=11/15/2007,5.1.2600.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTamd64
-
-[DestinationDirs]
-DefaultDestDir=12
-
-
-;------------------------------------------------------------------------------
-;  Windows 2000/XP/Vista-32bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.nt]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.nt
-AddReg=DriverInstall.nt.AddReg
-
-[DriverCopyFiles.nt]
-usbser.sys,,,0x20
-
-[DriverInstall.nt.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[DriverInstall.nt.Services]
-AddService=usbser, 0x00000002, DriverService.nt
-
-[DriverService.nt]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-;------------------------------------------------------------------------------
-;  Vista-64bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.NTamd64]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.NTamd64
-AddReg=DriverInstall.NTamd64.AddReg
-
-[DriverCopyFiles.NTamd64]
-%DRIVERFILENAME%.sys,,,0x20
-
-[DriverInstall.NTamd64.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[DriverInstall.NTamd64.Services]
-AddService=usbser, 0x00000002, DriverService.NTamd64
-
-[DriverService.NTamd64]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-
-;------------------------------------------------------------------------------
-;  Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID.  Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[SourceDisksFiles]
-[SourceDisksNames]
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_0036
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_8036&MI_00
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_0036
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_8036&MI_00
-
-;------------------------------------------------------------------------------
-;  String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGFILENAME="CDC_vista"
-DRIVERFILENAME ="usbser"
-MFGNAME="Arduino LLC (www.arduino.cc)"
-INSTDISK="Arduino Leonardo Driver Installer"
-DESCRIPTION="Arduino Leonardo"
-SERVICE="USB RS-232 Emulation Driver"
\ No newline at end of file
diff --git a/build/windows/dist/drivers/Arduino MEGA 2560 REV3.inf b/build/windows/dist/drivers/Arduino MEGA 2560 REV3.inf
deleted file mode 100644
index 6081f3c78..000000000
--- a/build/windows/dist/drivers/Arduino MEGA 2560 REV3.inf	
+++ /dev/null
@@ -1,106 +0,0 @@
-;************************************************************
-; Windows USB CDC ACM Setup File
-; Copyright (c) 2000 Microsoft Corporation
-
-
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%MFGNAME%
-LayoutFile=layout.inf
-CatalogFile=%MFGFILENAME%.cat
-DriverVer=11/15/2007,5.1.2600.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTamd64
-
-[DestinationDirs]
-DefaultDestDir=12
-
-
-;------------------------------------------------------------------------------
-;  Windows 2000/XP/Vista-32bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.nt]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.nt
-AddReg=DriverInstall.nt.AddReg
-
-[DriverCopyFiles.nt]
-usbser.sys,,,0x20
-
-[DriverInstall.nt.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[DriverInstall.nt.Services]
-AddService=usbser, 0x00000002, DriverService.nt
-
-[DriverService.nt]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-;------------------------------------------------------------------------------
-;  Vista-64bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.NTamd64]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.NTamd64
-AddReg=DriverInstall.NTamd64.AddReg
-
-[DriverCopyFiles.NTamd64]
-%DRIVERFILENAME%.sys,,,0x20
-
-[DriverInstall.NTamd64.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[DriverInstall.NTamd64.Services]
-AddService=usbser, 0x00000002, DriverService.NTamd64
-
-[DriverService.NTamd64]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-
-;------------------------------------------------------------------------------
-;  Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID.  Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[SourceDisksFiles]
-[SourceDisksNames]
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_0042
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_0042
-
-
-;------------------------------------------------------------------------------
-;  String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGFILENAME="CDC_vista"
-DRIVERFILENAME ="usbser"
-MFGNAME="Arduino LLC (www.arduino.cc)"
-INSTDISK="Arduino Mega 2560 R3 Driver Installer"
-DESCRIPTION="Arduino Mega 2560 R3"
-SERVICE="USB RS-232 Emulation Driver"
\ No newline at end of file
diff --git a/build/windows/dist/drivers/Arduino MEGA 2560.inf b/build/windows/dist/drivers/Arduino MEGA 2560.inf
deleted file mode 100644
index 95cb51485..000000000
--- a/build/windows/dist/drivers/Arduino MEGA 2560.inf	
+++ /dev/null
@@ -1,106 +0,0 @@
-;************************************************************
-; Windows USB CDC ACM Setup File
-; Copyright (c) 2000 Microsoft Corporation
-
-
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%MFGNAME%
-LayoutFile=layout.inf
-CatalogFile=%MFGFILENAME%.cat
-DriverVer=11/15/2007,5.1.2600.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTamd64
-
-[DestinationDirs]
-DefaultDestDir=12
-
-
-;------------------------------------------------------------------------------
-;  Windows 2000/XP/Vista-32bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.nt]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.nt
-AddReg=DriverInstall.nt.AddReg
-
-[DriverCopyFiles.nt]
-usbser.sys,,,0x20
-
-[DriverInstall.nt.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[DriverInstall.nt.Services]
-AddService=usbser, 0x00000002, DriverService.nt
-
-[DriverService.nt]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-;------------------------------------------------------------------------------
-;  Vista-64bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.NTamd64]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.NTamd64
-AddReg=DriverInstall.NTamd64.AddReg
-
-[DriverCopyFiles.NTamd64]
-%DRIVERFILENAME%.sys,,,0x20
-
-[DriverInstall.NTamd64.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[DriverInstall.NTamd64.Services]
-AddService=usbser, 0x00000002, DriverService.NTamd64
-
-[DriverService.NTamd64]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-
-;------------------------------------------------------------------------------
-;  Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID.  Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[SourceDisksFiles]
-[SourceDisksNames]
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_0010
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_0010
-
-
-;------------------------------------------------------------------------------
-;  String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGFILENAME="CDC_vista"
-DRIVERFILENAME ="usbser"
-MFGNAME="Arduino LLC (www.arduino.cc)"
-INSTDISK="Arduino Mega 2560 Driver Installer"
-DESCRIPTION="Arduino Mega 2560"
-SERVICE="USB RS-232 Emulation Driver"
\ No newline at end of file
diff --git a/build/windows/dist/drivers/Arduino Mega ADK REV3.inf b/build/windows/dist/drivers/Arduino Mega ADK REV3.inf
deleted file mode 100644
index 85978c8c3..000000000
--- a/build/windows/dist/drivers/Arduino Mega ADK REV3.inf	
+++ /dev/null
@@ -1,106 +0,0 @@
-;************************************************************
-; Windows USB CDC ACM Setup File
-; Copyright (c) 2000 Microsoft Corporation
-
-
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%MFGNAME%
-LayoutFile=layout.inf
-CatalogFile=%MFGFILENAME%.cat
-DriverVer=11/15/2007,5.1.2600.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTamd64
-
-[DestinationDirs]
-DefaultDestDir=12
-
-
-;------------------------------------------------------------------------------
-;  Windows 2000/XP/Vista-32bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.nt]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.nt
-AddReg=DriverInstall.nt.AddReg
-
-[DriverCopyFiles.nt]
-usbser.sys,,,0x20
-
-[DriverInstall.nt.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[DriverInstall.nt.Services]
-AddService=usbser, 0x00000002, DriverService.nt
-
-[DriverService.nt]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-;------------------------------------------------------------------------------
-;  Vista-64bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.NTamd64]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.NTamd64
-AddReg=DriverInstall.NTamd64.AddReg
-
-[DriverCopyFiles.NTamd64]
-%DRIVERFILENAME%.sys,,,0x20
-
-[DriverInstall.NTamd64.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[DriverInstall.NTamd64.Services]
-AddService=usbser, 0x00000002, DriverService.NTamd64
-
-[DriverService.NTamd64]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-
-;------------------------------------------------------------------------------
-;  Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID.  Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[SourceDisksFiles]
-[SourceDisksNames]
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_0044
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_0044
-
-
-;------------------------------------------------------------------------------
-;  String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGFILENAME="CDC_vista"
-DRIVERFILENAME ="usbser"
-MFGNAME="Arduino LLC (www.arduino.cc)"
-INSTDISK="Arduino Mega ADK R3 Driver Installer"
-DESCRIPTION="Arduino Mega ADK R3"
-SERVICE="USB RS-232 Emulation Driver"
\ No newline at end of file
diff --git a/build/windows/dist/drivers/Arduino Mega ADK.inf b/build/windows/dist/drivers/Arduino Mega ADK.inf
deleted file mode 100644
index 16b9663d0..000000000
--- a/build/windows/dist/drivers/Arduino Mega ADK.inf	
+++ /dev/null
@@ -1,106 +0,0 @@
-;************************************************************
-; Windows USB CDC ACM Setup File
-; Copyright (c) 2000 Microsoft Corporation
-
-
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%MFGNAME%
-LayoutFile=layout.inf
-CatalogFile=%MFGFILENAME%.cat
-DriverVer=11/15/2007,5.1.2600.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTamd64
-
-[DestinationDirs]
-DefaultDestDir=12
-
-
-;------------------------------------------------------------------------------
-;  Windows 2000/XP/Vista-32bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.nt]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.nt
-AddReg=DriverInstall.nt.AddReg
-
-[DriverCopyFiles.nt]
-usbser.sys,,,0x20
-
-[DriverInstall.nt.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[DriverInstall.nt.Services]
-AddService=usbser, 0x00000002, DriverService.nt
-
-[DriverService.nt]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-;------------------------------------------------------------------------------
-;  Vista-64bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.NTamd64]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.NTamd64
-AddReg=DriverInstall.NTamd64.AddReg
-
-[DriverCopyFiles.NTamd64]
-%DRIVERFILENAME%.sys,,,0x20
-
-[DriverInstall.NTamd64.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[DriverInstall.NTamd64.Services]
-AddService=usbser, 0x00000002, DriverService.NTamd64
-
-[DriverService.NTamd64]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-
-;------------------------------------------------------------------------------
-;  Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID.  Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[SourceDisksFiles]
-[SourceDisksNames]
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_003F
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_003F
-
-
-;------------------------------------------------------------------------------
-;  String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGFILENAME="CDC_vista"
-DRIVERFILENAME ="usbser"
-MFGNAME="Arduino LLC (www.arduino.cc)"
-INSTDISK="Arduino Mega ADK Driver Installer"
-DESCRIPTION="Arduino Mega ADK"
-SERVICE="USB RS-232 Emulation Driver"
\ No newline at end of file
diff --git a/build/windows/dist/drivers/Arduino Micro.inf b/build/windows/dist/drivers/Arduino Micro.inf
deleted file mode 100644
index a66412160..000000000
--- a/build/windows/dist/drivers/Arduino Micro.inf	
+++ /dev/null
@@ -1,107 +0,0 @@
-;************************************************************
-; Windows USB CDC ACM Setup File
-; Copyright (c) 2000 Microsoft Corporation
-
-
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%MFGNAME%
-LayoutFile=layout.inf
-CatalogFile=%MFGFILENAME%.cat
-DriverVer=11/15/2007,5.1.2600.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTamd64
-
-[DestinationDirs]
-DefaultDestDir=12
-
-
-;------------------------------------------------------------------------------
-;  Windows 2000/XP/Vista-32bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.nt]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.nt
-AddReg=DriverInstall.nt.AddReg
-
-[DriverCopyFiles.nt]
-usbser.sys,,,0x20
-
-[DriverInstall.nt.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[DriverInstall.nt.Services]
-AddService=usbser, 0x00000002, DriverService.nt
-
-[DriverService.nt]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-;------------------------------------------------------------------------------
-;  Vista-64bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.NTamd64]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.NTamd64
-AddReg=DriverInstall.NTamd64.AddReg
-
-[DriverCopyFiles.NTamd64]
-%DRIVERFILENAME%.sys,,,0x20
-
-[DriverInstall.NTamd64.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[DriverInstall.NTamd64.Services]
-AddService=usbser, 0x00000002, DriverService.NTamd64
-
-[DriverService.NTamd64]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-
-;------------------------------------------------------------------------------
-;  Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID.  Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[SourceDisksFiles]
-[SourceDisksNames]
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_0037
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_8037&MI_00
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_0037
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_8037&MI_00
-
-;------------------------------------------------------------------------------
-;  String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGFILENAME="CDC_vista"
-DRIVERFILENAME ="usbser"
-MFGNAME="Arduino LLC (www.arduino.cc)"
-INSTDISK="Arduino Micro Driver Installer"
-DESCRIPTION="Arduino Micro"
-SERVICE="USB RS-232 Emulation Driver"
\ No newline at end of file
diff --git a/build/windows/dist/drivers/Arduino UNO REV3.inf b/build/windows/dist/drivers/Arduino UNO REV3.inf
deleted file mode 100644
index 52da7eaf0..000000000
--- a/build/windows/dist/drivers/Arduino UNO REV3.inf	
+++ /dev/null
@@ -1,106 +0,0 @@
-;************************************************************
-; Windows USB CDC ACM Setup File
-; Copyright (c) 2000 Microsoft Corporation
-
-
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%MFGNAME%
-LayoutFile=layout.inf
-CatalogFile=%MFGFILENAME%.cat
-DriverVer=11/15/2007,5.1.2600.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTamd64
-
-[DestinationDirs]
-DefaultDestDir=12
-
-
-;------------------------------------------------------------------------------
-;  Windows 2000/XP/Vista-32bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.nt]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.nt
-AddReg=DriverInstall.nt.AddReg
-
-[DriverCopyFiles.nt]
-usbser.sys,,,0x20
-
-[DriverInstall.nt.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[DriverInstall.nt.Services]
-AddService=usbser, 0x00000002, DriverService.nt
-
-[DriverService.nt]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-;------------------------------------------------------------------------------
-;  Vista-64bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.NTamd64]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.NTamd64
-AddReg=DriverInstall.NTamd64.AddReg
-
-[DriverCopyFiles.NTamd64]
-%DRIVERFILENAME%.sys,,,0x20
-
-[DriverInstall.NTamd64.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[DriverInstall.NTamd64.Services]
-AddService=usbser, 0x00000002, DriverService.NTamd64
-
-[DriverService.NTamd64]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-
-;------------------------------------------------------------------------------
-;  Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID.  Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[SourceDisksFiles]
-[SourceDisksNames]
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_0043
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_0043
-
-
-;------------------------------------------------------------------------------
-;  String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGFILENAME="CDC_vista"
-DRIVERFILENAME ="usbser"
-MFGNAME="Arduino LLC (www.arduino.cc)"
-INSTDISK="Arduino UNO R3 Driver Installer"
-DESCRIPTION="Arduino UNO R3"
-SERVICE="USB RS-232 Emulation Driver"
\ No newline at end of file
diff --git a/build/windows/dist/drivers/Arduino UNO.inf b/build/windows/dist/drivers/Arduino UNO.inf
deleted file mode 100644
index 655de09b3..000000000
--- a/build/windows/dist/drivers/Arduino UNO.inf	
+++ /dev/null
@@ -1,106 +0,0 @@
-;************************************************************
-; Windows USB CDC ACM Setup File
-; Copyright (c) 2000 Microsoft Corporation
-
-
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%MFGNAME%
-LayoutFile=layout.inf
-CatalogFile=%MFGFILENAME%.cat
-DriverVer=11/15/2007,5.1.2600.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTamd64
-
-[DestinationDirs]
-DefaultDestDir=12
-
-
-;------------------------------------------------------------------------------
-;  Windows 2000/XP/Vista-32bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.nt]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.nt
-AddReg=DriverInstall.nt.AddReg
-
-[DriverCopyFiles.nt]
-usbser.sys,,,0x20
-
-[DriverInstall.nt.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[DriverInstall.nt.Services]
-AddService=usbser, 0x00000002, DriverService.nt
-
-[DriverService.nt]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-;------------------------------------------------------------------------------
-;  Vista-64bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.NTamd64]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.NTamd64
-AddReg=DriverInstall.NTamd64.AddReg
-
-[DriverCopyFiles.NTamd64]
-%DRIVERFILENAME%.sys,,,0x20
-
-[DriverInstall.NTamd64.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[DriverInstall.NTamd64.Services]
-AddService=usbser, 0x00000002, DriverService.NTamd64
-
-[DriverService.NTamd64]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-
-;------------------------------------------------------------------------------
-;  Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID.  Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[SourceDisksFiles]
-[SourceDisksNames]
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_0001
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_0001
-
-
-;------------------------------------------------------------------------------
-;  String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGFILENAME="CDC_vista"
-DRIVERFILENAME ="usbser"
-MFGNAME="http://www.arduino.cc"
-INSTDISK="Arduino UNO Driver Installer"
-DESCRIPTION="Communications Port"
-SERVICE="USB RS-232 Emulation Driver"
\ No newline at end of file
diff --git a/build/windows/dist/drivers/Arduino USBSerial.inf b/build/windows/dist/drivers/Arduino USBSerial.inf
deleted file mode 100644
index f8553fbb9..000000000
--- a/build/windows/dist/drivers/Arduino USBSerial.inf	
+++ /dev/null
@@ -1,106 +0,0 @@
-;************************************************************
-; Windows USB CDC ACM Setup File
-; Copyright (c) 2000 Microsoft Corporation
-
-
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%MFGNAME%
-LayoutFile=layout.inf
-CatalogFile=%MFGFILENAME%.cat
-DriverVer=11/15/2007,5.1.2600.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTamd64
-
-[DestinationDirs]
-DefaultDestDir=12
-
-
-;------------------------------------------------------------------------------
-;  Windows 2000/XP/Vista-32bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.nt]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.nt
-AddReg=DriverInstall.nt.AddReg
-
-[DriverCopyFiles.nt]
-usbser.sys,,,0x20
-
-[DriverInstall.nt.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[DriverInstall.nt.Services]
-AddService=usbser, 0x00000002, DriverService.nt
-
-[DriverService.nt]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-;------------------------------------------------------------------------------
-;  Vista-64bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.NTamd64]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.NTamd64
-AddReg=DriverInstall.NTamd64.AddReg
-
-[DriverCopyFiles.NTamd64]
-%DRIVERFILENAME%.sys,,,0x20
-
-[DriverInstall.NTamd64.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[DriverInstall.NTamd64.Services]
-AddService=usbser, 0x00000002, DriverService.NTamd64
-
-[DriverService.NTamd64]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-
-;------------------------------------------------------------------------------
-;  Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID.  Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[SourceDisksFiles]
-[SourceDisksNames]
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_003B
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_003B
-
-
-;------------------------------------------------------------------------------
-;  String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGFILENAME="CDC_vista"
-DRIVERFILENAME ="usbser"
-MFGNAME="Arduino LLC (www.arduino.cc)"
-INSTDISK="Arduino USBSerial Driver Installer"
-DESCRIPTION="Arduino UNO"
-SERVICE="USB RS-232 Emulation Driver"
\ No newline at end of file
diff --git a/build/windows/dist/drivers/LilyPadUSB.inf b/build/windows/dist/drivers/LilyPadUSB.inf
deleted file mode 100644
index b7183672d..000000000
--- a/build/windows/dist/drivers/LilyPadUSB.inf
+++ /dev/null
@@ -1,107 +0,0 @@
-;************************************************************
-; Windows USB CDC ACM Setup File
-; Copyright (c) 2000 Microsoft Corporation
-
-
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%MFGNAME%
-LayoutFile=layout.inf
-CatalogFile=%MFGFILENAME%.cat
-DriverVer=11/15/2007,5.1.2600.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTamd64
-
-[DestinationDirs]
-DefaultDestDir=12
-
-
-;------------------------------------------------------------------------------
-;  Windows 2000/XP/Vista-32bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.nt]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.nt
-AddReg=DriverInstall.nt.AddReg
-
-[DriverCopyFiles.nt]
-usbser.sys,,,0x20
-
-[DriverInstall.nt.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[DriverInstall.nt.Services]
-AddService=usbser, 0x00000002, DriverService.nt
-
-[DriverService.nt]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-;------------------------------------------------------------------------------
-;  Vista-64bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.NTamd64]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.NTamd64
-AddReg=DriverInstall.NTamd64.AddReg
-
-[DriverCopyFiles.NTamd64]
-%DRIVERFILENAME%.sys,,,0x20
-
-[DriverInstall.NTamd64.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[DriverInstall.NTamd64.Services]
-AddService=usbser, 0x00000002, DriverService.NTamd64
-
-[DriverService.NTamd64]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-
-;------------------------------------------------------------------------------
-;  Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID.  Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[SourceDisksFiles]
-[SourceDisksNames]
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_1B4F&PID_9207
-%DESCRIPTION%=DriverInstall, USB\VID_1B4F&PID_9208&MI_00
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_1B4F&PID_9207
-%DESCRIPTION%=DriverInstall, USB\VID_1B4F&PID_9208&MI_00
-
-;------------------------------------------------------------------------------
-;  String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGFILENAME="CDC_vista"
-DRIVERFILENAME ="usbser"
-MFGNAME="SparkFun Electronics"
-INSTDISK="SparkFun LilyPadUSB Driver Installer"
-DESCRIPTION="SparkFun LilyPadUSB"
-SERVICE="USB RS-232 Emulation Driver"
\ No newline at end of file
diff --git a/build/windows/dist/drivers/Old_Arduino_Drivers.zip b/build/windows/dist/drivers/Old_Arduino_Drivers.zip
new file mode 100644
index 000000000..080daea03
Binary files /dev/null and b/build/windows/dist/drivers/Old_Arduino_Drivers.zip differ
diff --git a/build/windows/dist/drivers/README.txt b/build/windows/dist/drivers/README.txt
new file mode 100644
index 000000000..ca4aeac91
--- /dev/null
+++ b/build/windows/dist/drivers/README.txt
@@ -0,0 +1,7 @@
+
+With this version of Arduino a new all-in-one driver (with
+security signature for Windows 8) is supplied.
+
+The old (deprected) drivers are still available in the
+Old_Arduino_Drivers.zip
+
diff --git a/build/windows/dist/drivers/arduino.cat b/build/windows/dist/drivers/arduino.cat
new file mode 100644
index 000000000..4dc538882
Binary files /dev/null and b/build/windows/dist/drivers/arduino.cat differ
diff --git a/build/windows/dist/drivers/arduino.inf b/build/windows/dist/drivers/arduino.inf
new file mode 100644
index 000000000..86abab733
--- /dev/null
+++ b/build/windows/dist/drivers/arduino.inf
@@ -0,0 +1,122 @@
+; Copyright 2012 Blacklabel Development, Inc.
+
+[Strings]
+DriverPackageDisplayName="Arduino Boards"
+ManufacturerName="Arduino LLC (www.arduino.cc)"
+ServiceName="USB RS-232 Emulation Driver"
+due.bossa.name="Bossa Program Port"
+due.programming_port.name="Arduino Due Programming Port"
+due.sketch.name="Arduino Due"
+esplora.bootloader.name="Arduino Esplora bootloader"
+esplora.sketch.name="Arduino Esplora"
+leonardo.bootloader.name="Arduino Leonardo bootloader"
+leonardo.sketch.name="Arduino Leonardo"
+lilypadUSB.bootloader.name="Arduino LilyPad USB bootloader"
+lilypadUSB.sketch.name="Arduino LilyPad USB"
+mega2560rev3.name="Arduino Mega 2560"
+megaADK.name="Arduino Mega ADK"
+megaADKrev3.name="Arduino Mega ADK"
+micro.bootloader.name="Arduino Micro bootloader"
+micro.sketch.name="Arduino Micro"
+uno.name="Arduino Uno"
+unoR3.name="Arduino Uno"
+usbserial.name="Arduino USB Serial Light Adapter"
+
+[DefaultInstall]
+CopyINF=arduino.inf
+
+[Version]
+Class=Ports
+ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
+Signature="$Windows NT$"
+Provider=%ManufacturerName%
+DriverPackageDisplayName=%DriverPackageDisplayName%
+CatalogFile=arduino.cat
+DriverVer=01/01/2013,1.0.0.0
+
+[Manufacturer]
+%ManufacturerName%=DeviceList, NTamd64, NTia64
+
+[DestinationDirs]
+FakeModemCopyFileSection=12
+DefaultDestDir=12
+
+[DeviceList]
+%due.bossa.name%=DriverInstall, USB\VID_03EB&PID_6124
+%due.programming_port.name%=DriverInstall, USB\VID_2341&PID_003D
+%due.sketch.name%=DriverInstall, USB\VID_2341&PID_003E&MI_00
+%esplora.bootloader.name%=DriverInstall, USB\VID_2341&PID_003C
+%esplora.sketch.name%=DriverInstall, USB\VID_2341&PID_803C&MI_00
+%leonardo.bootloader.name%=DriverInstall, USB\VID_2341&PID_0036
+%leonardo.sketch.name%=DriverInstall, USB\VID_2341&PID_8036&MI_00
+%lilypadUSB.bootloader.name%=DriverInstall, USB\VID_1B4F&PID_9207
+%lilypadUSB.sketch.name%=DriverInstall, USB\VID_1B4F&PID_9208&MI_00
+%mega2560rev3.name%=DriverInstall, USB\VID_2341&PID_0042
+%mega2560.name%=DriverInstall, USB\VID_2341&PID_0010
+%megaADK.name%=DriverInstall, USB\VID_2341&PID_003F
+%megaADKrev3.name%=DriverInstall, USB\VID_2341&PID_0044
+%micro.bootloader.name%=DriverInstall, USB\VID_2341&PID_0037
+%micro.sketch.name%=DriverInstall, USB\VID_2341&PID_8037&MI_00
+%uno.name%=DriverInstall, USB\VID_2341&PID_0001
+%unoR3.name%=DriverInstall, USB\VID_2341&PID_0043
+%usbserial.name%=DriverInstall, USB\VID_2341&PID_003B
+
+[DeviceList.NTamd64]
+%due.bossa.name%=DriverInstall, USB\VID_03EB&PID_6124
+%due.programming_port.name%=DriverInstall, USB\VID_2341&PID_003D
+%due.sketch.name%=DriverInstall, USB\VID_2341&PID_003E&MI_00
+%esplora.bootloader.name%=DriverInstall, USB\VID_2341&PID_003C
+%esplora.sketch.name%=DriverInstall, USB\VID_2341&PID_803C&MI_00
+%leonardo.bootloader.name%=DriverInstall, USB\VID_2341&PID_0036
+%leonardo.sketch.name%=DriverInstall, USB\VID_2341&PID_8036&MI_00
+%lilypadUSB.bootloader.name%=DriverInstall, USB\VID_1B4F&PID_9207
+%lilypadUSB.sketch.name%=DriverInstall, USB\VID_1B4F&PID_9208&MI_00
+%mega2560rev3.name%=DriverInstall, USB\VID_2341&PID_0042
+%mega2560.name%=DriverInstall, USB\VID_2341&PID_0010
+%megaADK.name%=DriverInstall, USB\VID_2341&PID_003F
+%megaADKrev3.name%=DriverInstall, USB\VID_2341&PID_0044
+%micro.bootloader.name%=DriverInstall, USB\VID_2341&PID_0037
+%micro.sketch.name%=DriverInstall, USB\VID_2341&PID_8037&MI_00
+%uno.name%=DriverInstall, USB\VID_2341&PID_0001
+%unoR3.name%=DriverInstall, USB\VID_2341&PID_0043
+%usbserial.name%=DriverInstall, USB\VID_2341&PID_003B
+
+[DeviceList.NTia64]
+%esplora.bootloader.name%=DriverInstall, USB\VID_2341&PID_003C
+%esplora.sketch.name%=DriverInstall, USB\VID_2341&PID_803C&MI_00
+%leonardo.bootloader.name%=DriverInstall, USB\VID_2341&PID_0036
+%leonardo.sketch.name%=DriverInstall, USB\VID_2341&PID_8036&MI_00
+%lilypadUSB.bootloader.name%=DriverInstall, USB\VID_1B4F&PID_9207
+%lilypadUSB.sketch.name%=DriverInstall, USB\VID_1B4F&PID_9208&MI_00
+%mega2560rev3.name%=DriverInstall, USB\VID_2341&PID_0042
+%mega2560.name%=DriverInstall, USB\VID_2341&PID_0010
+%megaADK.name%=DriverInstall, USB\VID_2341&PID_003F
+%megaADKrev3.name%=DriverInstall, USB\VID_2341&PID_0044
+%micro.bootloader.name%=DriverInstall, USB\VID_2341&PID_0037
+%micro.sketch.name%=DriverInstall, USB\VID_2341&PID_8037&MI_00
+%uno.name%=DriverInstall, USB\VID_2341&PID_0001
+%unoR3.name%=DriverInstall, USB\VID_2341&PID_0043
+%usbserial.name%=DriverInstall, USB\VID_2341&PID_003B
+
+[DriverInstall]
+include=mdmcpq.inf,usb.inf
+CopyFiles = FakeModemCopyFileSection
+AddReg=DriverAddReg
+
+[DriverAddReg]
+HKR,,DevLoader,,*ntkern 
+HKR,,NTMPDriver,,usbser.sys 
+HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+
+[DriverInstall.Services]
+include=mdmcpq.inf
+AddService=usbser, 0x00000002, DriverService
+
+[DriverService]
+DisplayName=%ServiceName%
+ServiceType=1
+StartType=3
+ErrorControl=1
+ServiceBinary=%12%\usbser.sys
+LoadOrderGroup=Base
+