rooty/Arduino
1
0
Fork 0
mirror of https://github.com/arduino/Arduino.git synced 2025-01-18 07:52:14 +01:00
Code Issues Releases Activity

Updating Makefile to derive target name from the current folder.

Browse Source
This commit is contained in:
David A. Mellis 2008-08-17 20:10:47 +00:00
parent 7630c3a887
commit 191bb02f00
1 changed files with 11 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

24
hardware/cores/arduino/Makefile
View File

@ -7,36 +7,34 @@
# Detailed instructions for using the makefile:
#
# 1. Copy this file into the folder with your sketch. There should be a
# file with the extension .pde (e.g. foo.pde)
# file with the same name as the folder and with the extension .pde
# (e.g. foo.pde in the foo/ folder).
#
# 2. Below, modify the line containing "TARGET" to refer to the name of
# of your program's file without an extension (e.g. TARGET = foo).
#
# 3. Modify the line containg "INSTALL_DIR" to point to the directory that
# 2. Modify the line containg "INSTALL_DIR" to point to the directory that
# contains the Arduino installation (for example, under Mac OS X, this
# might be /Applications/arduino-0011).
# might be /Applications/arduino-0012).
#
# 4. Modify the line containing "PORT" to refer to the filename
# 3. Modify the line containing "PORT" to refer to the filename
# representing the USB or serial connection to your Arduino board
# (e.g. PORT = /dev/tty.USB0). If the exact name of this file
# changes, you can use * as a wildcard (e.g. PORT = /dev/tty.USB*).
# changes, you can use * as a wildcard (e.g. PORT = /dev/tty.usb*).
#
# 5. Set the line containing "MCU" to match your board's processor.
# 4. Set the line containing "MCU" to match your board's processor.
# Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth
# or Diecimila have the atmega168. If you're using a LilyPad Arduino,
# change F_CPU to 8000000.
#
# 6. At the command line, change to the directory containing your
# 5. At the command line, change to the directory containing your
# program's file and the makefile.
#
# 7. Type "make" and press enter to compile/verify your program.
# 6. Type "make" and press enter to compile/verify your program.
#
# 8. Type "make upload", reset your Arduino board, and press enter to
# 7. Type "make upload", reset your Arduino board, and press enter to
# upload your program to the Arduino board.
#
# $Id$
TARGET = foo
TARGET = $(notdir $(CURDIR))
INSTALL_DIR = /Users/dmellis/Source/arduino/trunk/build/macosx/build/work
PORT = /dev/tty.usb*
UPLOAD_RATE = 19200