diff --git a/build/shared/examples/04.Communication/MultiSerialMega/MultiSerialMega.ino b/build/shared/examples/04.Communication/MultiSerialMega/MultiSerialMega.ino
deleted file mode 100644
index 54e31549b..000000000
--- a/build/shared/examples/04.Communication/MultiSerialMega/MultiSerialMega.ino
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
-  Mega multple serial test
-
- Receives from the main serial port, sends to the others.
- Receives from serial port 1, sends to the main serial (Serial 0).
-
- This example works only on the Arduino Mega
-
- The circuit:
- * Any serial device attached to Serial port 1
- * Serial monitor open on Serial port 0:
-
- created 30 Dec. 2008
- modified 20 May 2012
- by Tom Igoe & Jed Roach
-
- This example code is in the public domain.
-
- */
-
-
-void setup() {
-  // initialize both serial ports:
-  Serial.begin(9600);
-  Serial1.begin(9600);
-}
-
-void loop() {
-  // read from port 1, send to port 0:
-  if (Serial1.available()) {
-    int inByte = Serial1.read();
-    Serial.write(inByte);
-  }
-
-  // read from port 0, send to port 1:
-  if (Serial.available()) {
-    int inByte = Serial.read();
-    Serial1.write(inByte);
-  }
-}
diff --git a/build/shared/examples/04.Communication/MultiSerialMega/MultiSerialMega.txt b/build/shared/examples/04.Communication/MultiSerialMega/MultiSerialMega.txt
deleted file mode 100644
index 3383c9026..000000000
--- a/build/shared/examples/04.Communication/MultiSerialMega/MultiSerialMega.txt
+++ /dev/null
@@ -1 +0,0 @@
-Use two of the serial ports available on the Arduino Mega.
\ No newline at end of file