mirror of
https://github.com/arduino/Arduino.git
synced 2025-01-30 19:52:13 +01:00
Adding the Arduino BT bootloader source code (.c) and .hex file.
This commit is contained in:
David A. Mellis
parent
adc02386ec
commit
58bed2dc5d
1032
bootloaderBT/ATmegaBOOT_168.c
Normal file
1032
bootloaderBT/ATmegaBOOT_168.c
Normal file
@ -0,0 +1,1032 @@
|
||||
/**********************************************************/
|
||||
/* Serial Bootloader for Atmel megaAVR Controllers */
|
||||
/* */
|
||||
/* tested with ATmega8, ATmega128 and ATmega168 */
|
||||
/* should work with other mega's, see code for details */
|
||||
/* */
|
||||
/* ATmegaBOOT.c */
|
||||
/* */
|
||||
/* build: 050815 */
|
||||
/* date : 15.08.2005 */
|
||||
/* */
|
||||
/* 20060802: hacked for Arduino by D. Cuartielles */
|
||||
/* based on a previous hack by D. Mellis */
|
||||
/* and D. Cuartielles */
|
||||
/* */
|
||||
/* Monitor and debug functions were added to the original */
|
||||
/* code by Dr. Erik Lins, chip45.com. (See below) */
|
||||
/* */
|
||||
/* Thanks to Karl Pitrich for fixing a bootloader pin */
|
||||
/* problem and more informative LED blinking! */
|
||||
/* */
|
||||
/* For the latest version see: */
|
||||
/* http://www.chip45.com/ */
|
||||
/* */
|
||||
/* ------------------------------------------------------ */
|
||||
/* */
|
||||
/* based on stk500boot.c */
|
||||
/* Copyright (c) 2003, Jason P. Kyle */
|
||||
/* All rights reserved. */
|
||||
/* see avr1.org for original file and information */
|
||||
/* */
|
||||
/* This program is free software; you can redistribute it */
|
||||
/* and/or modify it under the terms of the GNU General */
|
||||
/* Public License as published by the Free Software */
|
||||
/* Foundation; either version 2 of the License, or */
|
||||
/* (at your option) any later version. */
|
||||
/* */
|
||||
/* This program is distributed in the hope that it will */
|
||||
/* be useful, but WITHOUT ANY WARRANTY; without even the */
|
||||
/* implied warranty of MERCHANTABILITY or FITNESS FOR A */
|
||||
/* PARTICULAR PURPOSE. See the GNU General Public */
|
||||
/* License for more details. */
|
||||
/* */
|
||||
/* You should have received a copy of the GNU General */
|
||||
/* Public License along with this program; if not, write */
|
||||
/* to the Free Software Foundation, Inc., */
|
||||
/* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */
|
||||
/* */
|
||||
/* Licence can be viewed at */
|
||||
/* http://www.fsf.org/licenses/gpl.txt */
|
||||
/* */
|
||||
/* Target = Atmel AVR m128,m64,m32,m16,m8,m162,m163,m169, */
|
||||
/* m8515,m8535. ATmega161 has a very small boot block so */
|
||||
/* isn't supported. */
|
||||
/* */
|
||||
/* Tested with m128,m8,m163 - feel free to let me know */
|
||||
/* how/if it works for you. */
|
||||
/* */
|
||||
/**********************************************************/
|
||||
|
||||
|
||||
/* some includes */
|
||||
#include <inttypes.h>
|
||||
#include <avr/io.h>
|
||||
#include <avr/pgmspace.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include <avr/wdt.h>
|
||||
|
||||
|
||||
#define set_output(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
|
||||
#define set_input(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
|
||||
|
||||
|
||||
#define high(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
|
||||
#define low(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
|
||||
|
||||
|
||||
|
||||
|
||||
/* the current avr-libc eeprom functions do not support the ATmega168 */
|
||||
/* own eeprom write/read functions are used instead */
|
||||
#ifndef __AVR_ATmega168__
|
||||
#include <avr/eeprom.h>
|
||||
#endif
|
||||
|
||||
/* define F_CPU according to AVR_FREQ set in Makefile */
|
||||
/* Is there a better way to pass such a parameter from Makefile to source code ? */
|
||||
|
||||
#define F_CPU 16000000L
|
||||
|
||||
#include <util/delay.h>
|
||||
|
||||
|
||||
/* 20060803: hacked by DojoCorp */
|
||||
/* set the waiting time for the bootloader */
|
||||
#define MAX_TIME_COUNT (F_CPU>>1)
|
||||
|
||||
/* set the UART baud rate */
|
||||
/* 20060803: hacked by DojoCorp */
|
||||
#define BAUD_RATE 115200
|
||||
|
||||
|
||||
/* SW_MAJOR and MINOR needs to be updated from time to time to avoid warning message from AVR Studio */
|
||||
/* never allow AVR Studio to do an update !!!! */
|
||||
#define HW_VER 0x02
|
||||
#define SW_MAJOR 0x01
|
||||
#define SW_MINOR 0x0f
|
||||
|
||||
|
||||
/* Adjust to suit whatever pin your hardware uses to enter the bootloader */
|
||||
/* ATmega128 has two UARTS so two pins are used to enter bootloader and select UART */
|
||||
/* BL0... means UART0, BL1... means UART1 */
|
||||
#ifdef __AVR_ATmega128__
|
||||
#define BL_DDR DDRF
|
||||
#define BL_PORT PORTF
|
||||
#define BL_PIN PINF
|
||||
#define BL0 PINF7
|
||||
#define BL1 PINF6
|
||||
#else
|
||||
/* other ATmegas have only one UART, so only one pin is defined to enter bootloader */
|
||||
#define BL_DDR DDRD
|
||||
#define BL_PORT PORTD
|
||||
#define BL_PIN PIND
|
||||
#define BL PIND6
|
||||
#endif
|
||||
|
||||
|
||||
/* onboard LED is used to indicate, that the bootloader was entered (3x flashing) */
|
||||
/* if monitor functions are included, LED goes on after monitor was entered */
|
||||
#ifdef __AVR_ATmega128__
|
||||
/* Onboard LED is connected to pin PB7 (e.g. Crumb128, PROBOmega128, Savvy128) */
|
||||
#define LED_DDR DDRB
|
||||
#define LED_PORT PORTB
|
||||
#define LED_PIN PINB
|
||||
#define LED PINB7
|
||||
#else
|
||||
/* Onboard LED is connected to pin PB2 (e.g. Crumb8, Crumb168) */
|
||||
#define LED_DDR DDRB
|
||||
#define LED_PORT PORTB
|
||||
#define LED_PIN PINB
|
||||
/* 20060803: hacked by DojoCorp, LED pin is B5 in Arduino */
|
||||
/* #define LED PINB2 */
|
||||
#define LED PINB5
|
||||
#endif
|
||||
|
||||
|
||||
/* monitor functions will only be compiled when using ATmega128, due to bootblock size constraints */
|
||||
#ifdef __AVR_ATmega128__
|
||||
#define MONITOR
|
||||
#endif
|
||||
|
||||
|
||||
/* define various device id's */
|
||||
/* manufacturer byte is always the same */
|
||||
#define SIG1 0x1E // Yep, Atmel is the only manufacturer of AVR micros. Single source :(
|
||||
|
||||
#if defined __AVR_ATmega128__
|
||||
#define SIG2 0x97
|
||||
#define SIG3 0x02
|
||||
#define PAGE_SIZE 0x80U //128 words
|
||||
|
||||
#elif defined __AVR_ATmega64__
|
||||
#define SIG2 0x96
|
||||
#define SIG3 0x02
|
||||
#define PAGE_SIZE 0x80U //128 words
|
||||
|
||||
#elif defined __AVR_ATmega32__
|
||||
#define SIG2 0x95
|
||||
#define SIG3 0x02
|
||||
#define PAGE_SIZE 0x40U //64 words
|
||||
|
||||
#elif defined __AVR_ATmega16__
|
||||
#define SIG2 0x94
|
||||
#define SIG3 0x03
|
||||
#define PAGE_SIZE 0x40U //64 words
|
||||
|
||||
#elif defined __AVR_ATmega8__
|
||||
#define SIG2 0x93
|
||||
#define SIG3 0x07
|
||||
#define PAGE_SIZE 0x20U //32 words
|
||||
|
||||
#elif defined __AVR_ATmega88__
|
||||
#define SIG2 0x93
|
||||
#define SIG3 0x0a
|
||||
#define PAGE_SIZE 0x20U //32 words
|
||||
|
||||
#elif defined __AVR_ATmega168__
|
||||
#define SIG2 0x94
|
||||
#define SIG3 0x06
|
||||
#define PAGE_SIZE 0x40U //64 words
|
||||
|
||||
#elif defined __AVR_ATmega162__
|
||||
#define SIG2 0x94
|
||||
#define SIG3 0x04
|
||||
#define PAGE_SIZE 0x40U //64 words
|
||||
|
||||
#elif defined __AVR_ATmega163__
|
||||
#define SIG2 0x94
|
||||
#define SIG3 0x02
|
||||
#define PAGE_SIZE 0x40U //64 words
|
||||
|
||||
#elif defined __AVR_ATmega169__
|
||||
#define SIG2 0x94
|
||||
#define SIG3 0x05
|
||||
#define PAGE_SIZE 0x40U //64 words
|
||||
|
||||
#elif defined __AVR_ATmega8515__
|
||||
#define SIG2 0x93
|
||||
#define SIG3 0x06
|
||||
#define PAGE_SIZE 0x20U //32 words
|
||||
|
||||
#elif defined __AVR_ATmega8535__
|
||||
#define SIG2 0x93
|
||||
#define SIG3 0x08
|
||||
#define PAGE_SIZE 0x20U //32 words
|
||||
#endif
|
||||
|
||||
|
||||
/* function prototypes */
|
||||
void putch(char);
|
||||
char getch(void);
|
||||
void getNch(uint8_t);
|
||||
void byte_response(uint8_t);
|
||||
void nothing_response(void);
|
||||
char gethex(void);
|
||||
void puthex(char);
|
||||
void flash_led(uint8_t);
|
||||
|
||||
/* some variables */
|
||||
union address_union {
|
||||
uint16_t word;
|
||||
uint8_t byte[2];
|
||||
} address;
|
||||
|
||||
union length_union {
|
||||
uint16_t word;
|
||||
uint8_t byte[2];
|
||||
} length;
|
||||
|
||||
struct flags_struct {
|
||||
unsigned eeprom : 1;
|
||||
unsigned rampz : 1;
|
||||
} flags;
|
||||
|
||||
uint8_t buff[256];
|
||||
uint8_t address_high;
|
||||
|
||||
uint8_t pagesz=0x80;
|
||||
|
||||
uint8_t i;
|
||||
uint8_t bootuart = 0;
|
||||
|
||||
void (*app_start)(void) = 0x0000;
|
||||
|
||||
|
||||
/* main program starts here */
|
||||
int main(void)
|
||||
{
|
||||
uint8_t ch,ch2;
|
||||
uint16_t w;
|
||||
|
||||
asm volatile("nop\n\t");
|
||||
|
||||
/* set pin direction for bootloader pin and enable pullup */
|
||||
/* for ATmega128, two pins need to be initialized */
|
||||
#ifdef __AVR_ATmega128__
|
||||
BL_DDR &= ~_BV(BL0);
|
||||
BL_DDR &= ~_BV(BL1);
|
||||
BL_PORT |= _BV(BL0);
|
||||
BL_PORT |= _BV(BL1);
|
||||
#else
|
||||
BL_DDR &= ~_BV(BL);
|
||||
BL_PORT |= _BV(BL);
|
||||
#endif
|
||||
|
||||
|
||||
#ifdef __AVR_ATmega128__
|
||||
/* check which UART should be used for booting */
|
||||
if(bit_is_clear(BL_PIN, BL0)) {
|
||||
bootuart = 1;
|
||||
}
|
||||
else if(bit_is_clear(BL_PIN, BL1)) {
|
||||
bootuart = 2;
|
||||
}
|
||||
#endif
|
||||
|
||||
/* check if flash is programmed already, if not start bootloader anyway */
|
||||
if(pgm_read_byte_near(0x0000) != 0xFF) {
|
||||
|
||||
#ifdef __AVR_ATmega128__
|
||||
/* no UART was selected, start application */
|
||||
if(!bootuart) {
|
||||
app_start();
|
||||
}
|
||||
#else
|
||||
/* check if bootloader pin is set low */
|
||||
/* we don't start this part neither for the m8, nor m168 */
|
||||
//if(bit_is_set(BL_PIN, BL)) {
|
||||
// app_start();
|
||||
// }
|
||||
#endif
|
||||
}
|
||||
|
||||
#ifdef __AVR_ATmega128__
|
||||
/* no bootuart was selected, default to uart 0 */
|
||||
if(!bootuart) {
|
||||
bootuart = 1;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
/* initialize UART(s) depending on CPU defined */
|
||||
#ifdef __AVR_ATmega128__
|
||||
if(bootuart == 1) {
|
||||
UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1);
|
||||
UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8;
|
||||
UCSR0A = 0x00;
|
||||
UCSR0C = 0x06;
|
||||
UCSR0B = _BV(TXEN0)|_BV(RXEN0);
|
||||
}
|
||||
if(bootuart == 2) {
|
||||
UBRR1L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1);
|
||||
UBRR1H = (F_CPU/(BAUD_RATE*16L)-1) >> 8;
|
||||
UCSR1A = 0x00;
|
||||
UCSR1C = 0x06;
|
||||
UCSR1B = _BV(TXEN1)|_BV(RXEN1);
|
||||
}
|
||||
#elif defined __AVR_ATmega163__
|
||||
UBRR = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1);
|
||||
UBRRHI = (F_CPU/(BAUD_RATE*16L)-1) >> 8;
|
||||
UCSRA = 0x00;
|
||||
UCSRB = _BV(TXEN)|_BV(RXEN);
|
||||
#elif defined __AVR_ATmega168__
|
||||
UBRR0H = ((F_CPU / 16 + BAUD_RATE / 2) / BAUD_RATE - 1) >> 8;
|
||||
UBRR0L = ((F_CPU / 16 + BAUD_RATE / 2) / BAUD_RATE - 1);
|
||||
|
||||
|
||||
//UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1);
|
||||
//UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8;
|
||||
UCSR0B = (1<<RXEN0) | (1<<TXEN0);
|
||||
UCSR0C = (1<<UCSZ00) | (1<<UCSZ01);
|
||||
#elif defined __AVR_ATmega8__
|
||||
/* m8 */
|
||||
UBRRH = (((F_CPU/BAUD_RATE)/16)-1)>>8; // set baud rate
|
||||
UBRRL = (((F_CPU/BAUD_RATE)/16)-1);
|
||||
UCSRB = (1<<RXEN)|(1<<TXEN); // enable Rx & Tx
|
||||
UCSRC = (1<<URSEL)|(1<<UCSZ1)|(1<<UCSZ0); // config USART; 8N1
|
||||
#else
|
||||
/* m16,m32,m169,m8515,m8535 */
|
||||
UBRRL = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1);
|
||||
UBRRH = (F_CPU/(BAUD_RATE*16L)-1) >> 8;
|
||||
UCSRA = 0x00;
|
||||
UCSRC = 0x06;
|
||||
UCSRB = _BV(TXEN)|_BV(RXEN);
|
||||
#endif
|
||||
|
||||
/* set LED pin as output */
|
||||
LED_DDR |= _BV(LED);
|
||||
|
||||
|
||||
|
||||
set_output(DDRD,PIND7);
|
||||
high(PORTD,PD7);
|
||||
for (i = 0; i < 16; i++) {
|
||||
|
||||
_delay_loop_2(0);
|
||||
}
|
||||
|
||||
|
||||
low(PORTD,PD7);
|
||||
|
||||
|
||||
/* flash onboard LED to signal entering of bootloader */
|
||||
#ifdef __AVR_ATmega128__
|
||||
// 4x for UART0, 5x for UART1
|
||||
flash_led(3 + bootuart);
|
||||
#else
|
||||
flash_led(3);
|
||||
#endif
|
||||
|
||||
/* 20050803: by DojoCorp, this is one of the parts provoking the
|
||||
system to stop listening, cancelled from the original */
|
||||
//putch('\0');
|
||||
|
||||
|
||||
//message("SET BT PAGEMODE 3 2000 1");
|
||||
putch('S');
|
||||
putch('E');
|
||||
putch('T');
|
||||
putch(' ');
|
||||
putch('B');
|
||||
putch('T');
|
||||
putch(' ');
|
||||
putch('P');
|
||||
putch('A');
|
||||
putch('G');
|
||||
putch('E');
|
||||
putch('M');
|
||||
putch('O');
|
||||
putch('D');
|
||||
putch('E');
|
||||
putch(' ');
|
||||
putch('3');
|
||||
putch(' ');
|
||||
putch('2');
|
||||
putch('0');
|
||||
putch('0');
|
||||
putch('0');
|
||||
putch(' ');
|
||||
putch('1');
|
||||
putch(0x0D);
|
||||
|
||||
|
||||
//put_s("SET BT ROLE 0 f 7d00");
|
||||
putch('S');
|
||||
putch('E');
|
||||
putch('T');
|
||||
putch(' ');
|
||||
putch('B');
|
||||
putch('T');
|
||||
putch(' ');
|
||||
putch('R');
|
||||
putch('O');
|
||||
putch('L');
|
||||
putch('E');
|
||||
putch(' ');
|
||||
putch('0');
|
||||
putch(' ');
|
||||
putch('f');
|
||||
putch(' ');
|
||||
putch('7');
|
||||
putch('d');
|
||||
putch('0');
|
||||
putch('0');
|
||||
putch(0x0D);
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
/* forever loop */
|
||||
for (;;) {
|
||||
|
||||
/* get character from UART */
|
||||
ch = getch();
|
||||
|
||||
/* A bunch of if...else if... gives smaller code than switch...case ! */
|
||||
|
||||
/* Hello is anyone home ? */
|
||||
if(ch=='0') {
|
||||
nothing_response();
|
||||
}
|
||||
|
||||
|
||||
/* Request programmer ID */
|
||||
/* Not using PROGMEM string due to boot block in m128 being beyond 64kB boundry */
|
||||
/* Would need to selectively manipulate RAMPZ, and it's only 9 characters anyway so who cares. */
|
||||
else if(ch=='1') {
|
||||
if (getch() == ' ') {
|
||||
putch(0x14);
|
||||
putch('A');
|
||||
putch('V');
|
||||
putch('R');
|
||||
putch(' ');
|
||||
putch('I');
|
||||
putch('S');
|
||||
putch('P');
|
||||
putch(0x10);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/* AVR ISP/STK500 board commands DON'T CARE so default nothing_response */
|
||||
else if(ch=='@') {
|
||||
ch2 = getch();
|
||||
if (ch2>0x85) getch();
|
||||
nothing_response();
|
||||
}
|
||||
|
||||
|
||||
/* AVR ISP/STK500 board requests */
|
||||
else if(ch=='A') {
|
||||
ch2 = getch();
|
||||
if(ch2==0x80) byte_response(HW_VER); // Hardware version
|
||||
else if(ch2==0x81) byte_response(SW_MAJOR); // Software major version
|
||||
else if(ch2==0x82) byte_response(SW_MINOR); // Software minor version
|
||||
else if(ch2==0x98) byte_response(0x03); // Unknown but seems to be required by avr studio 3.56
|
||||
else byte_response(0x00); // Covers various unnecessary responses we don't care about
|
||||
}
|
||||
|
||||
|
||||
/* Device Parameters DON'T CARE, DEVICE IS FIXED */
|
||||
else if(ch=='B') {
|
||||
getNch(20);
|
||||
nothing_response();
|
||||
}
|
||||
|
||||
|
||||
/* Parallel programming stuff DON'T CARE */
|
||||
else if(ch=='E') {
|
||||
getNch(5);
|
||||
nothing_response();
|
||||
}
|
||||
|
||||
|
||||
/* Enter programming mode */
|
||||
else if(ch=='P') {
|
||||
nothing_response();
|
||||
}
|
||||
|
||||
|
||||
/* Leave programming mode */
|
||||
else if(ch=='Q') {
|
||||
nothing_response();
|
||||
}
|
||||
|
||||
|
||||
/* Erase device, don't care as we will erase one page at a time anyway. */
|
||||
else if(ch=='R') {
|
||||
nothing_response();
|
||||
}
|
||||
|
||||
|
||||
/* Set address, little endian. EEPROM in bytes, FLASH in words */
|
||||
/* Perhaps extra address bytes may be added in future to support > 128kB FLASH. */
|
||||
/* This might explain why little endian was used here, big endian used everywhere else. */
|
||||
else if(ch=='U') {
|
||||
address.byte[0] = getch();
|
||||
address.byte[1] = getch();
|
||||
nothing_response();
|
||||
}
|
||||
|
||||
|
||||
/* Universal SPI programming command, disabled. Would be used for fuses and lock bits. */
|
||||
else if(ch=='V') {
|
||||
getNch(4);
|
||||
byte_response(0x00);
|
||||
}
|
||||
|
||||
|
||||
/* Write memory, length is big endian and is in bytes */
|
||||
else if(ch=='d') {
|
||||
length.byte[1] = getch();
|
||||
length.byte[0] = getch();
|
||||
flags.eeprom = 0;
|
||||
if (getch() == 'E') flags.eeprom = 1;
|
||||
for (w=0;w<length.word;w++) {
|
||||
buff[w] = getch(); // Store data in buffer, can't keep up with serial data stream whilst programming pages
|
||||
}
|
||||
if (getch() == ' ') {
|
||||
if (flags.eeprom) { //Write to EEPROM one byte at a time
|
||||
for(w=0;w<length.word;w++) {
|
||||
#ifdef __AVR_ATmega168__
|
||||
while(EECR & (1<<EEPE));
|
||||
EEAR = (uint16_t)(void *)address.word;
|
||||
EEDR = buff[w];
|
||||
EECR |= (1<<EEMPE);
|
||||
EECR |= (1<<EEPE);
|
||||
#else
|
||||
eeprom_write_byte((void *)address.word,buff[w]);
|
||||
#endif
|
||||
address.word++;
|
||||
}
|
||||
}
|
||||
else { //Write to FLASH one page at a time
|
||||
if (address.byte[1]>127) address_high = 0x01; //Only possible with m128, m256 will need 3rd address byte. FIXME
|
||||
else address_high = 0x00;
|
||||
#ifdef __AVR_ATmega128__
|
||||
RAMPZ = address_high;
|
||||
#endif
|
||||
address.word = address.word << 1; //address * 2 -> byte location
|
||||
/* if ((length.byte[0] & 0x01) == 0x01) length.word++; //Even up an odd number of bytes */
|
||||
if ((length.byte[0] & 0x01)) length.word++; //Even up an odd number of bytes
|
||||
cli(); //Disable interrupts, just to be sure
|
||||
// HACKME: EEPE used to be EEWE
|
||||
while(bit_is_set(EECR,EEPE)); //Wait for previous EEPROM writes to complete
|
||||
asm volatile(
|
||||
"clr r17 \n\t" //page_word_count
|
||||
"lds r30,address \n\t" //Address of FLASH location (in bytes)
|
||||
"lds r31,address+1 \n\t"
|
||||
"ldi r28,lo8(buff) \n\t" //Start of buffer array in RAM
|
||||
"ldi r29,hi8(buff) \n\t"
|
||||
"lds r24,length \n\t" //Length of data to be written (in bytes)
|
||||
"lds r25,length+1 \n\t"
|
||||
"length_loop: \n\t" //Main loop, repeat for number of words in block
|
||||
"cpi r17,0x00 \n\t" //If page_word_count=0 then erase page
|
||||
"brne no_page_erase \n\t"
|
||||
"wait_spm1: \n\t"
|
||||
"lds r16,%0 \n\t" //Wait for previous spm to complete
|
||||
"andi r16,1 \n\t"
|
||||
"cpi r16,1 \n\t"
|
||||
"breq wait_spm1 \n\t"
|
||||
"ldi r16,0x03 \n\t" //Erase page pointed to by Z
|
||||
"sts %0,r16 \n\t"
|
||||
"spm \n\t"
|
||||
#ifdef __AVR_ATmega163__
|
||||
".word 0xFFFF \n\t"
|
||||
"nop \n\t"
|
||||
#endif
|
||||
"wait_spm2: \n\t"
|
||||
"lds r16,%0 \n\t" //Wait for previous spm to complete
|
||||
"andi r16,1 \n\t"
|
||||
"cpi r16,1 \n\t"
|
||||
"breq wait_spm2 \n\t"
|
||||
|
||||
"ldi r16,0x11 \n\t" //Re-enable RWW section
|
||||
"sts %0,r16 \n\t"
|
||||
"spm \n\t"
|
||||
#ifdef __AVR_ATmega163__
|
||||
".word 0xFFFF \n\t"
|
||||
"nop \n\t"
|
||||
#endif
|
||||
"no_page_erase: \n\t"
|
||||
"ld r0,Y+ \n\t" //Write 2 bytes into page buffer
|
||||
"ld r1,Y+ \n\t"
|
||||
|
||||
"wait_spm3: \n\t"
|
||||
"lds r16,%0 \n\t" //Wait for previous spm to complete
|
||||
"andi r16,1 \n\t"
|
||||
"cpi r16,1 \n\t"
|
||||
"breq wait_spm3 \n\t"
|
||||
"ldi r16,0x01 \n\t" //Load r0,r1 into FLASH page buffer
|
||||
"sts %0,r16 \n\t"
|
||||
"spm \n\t"
|
||||
|
||||
"inc r17 \n\t" //page_word_count++
|
||||
"cpi r17,%1 \n\t"
|
||||
"brlo same_page \n\t" //Still same page in FLASH
|
||||
"write_page: \n\t"
|
||||
"clr r17 \n\t" //New page, write current one first
|
||||
"wait_spm4: \n\t"
|
||||
"lds r16,%0 \n\t" //Wait for previous spm to complete
|
||||
"andi r16,1 \n\t"
|
||||
"cpi r16,1 \n\t"
|
||||
"breq wait_spm4 \n\t"
|
||||
#ifdef __AVR_ATmega163__
|
||||
"andi r30,0x80 \n\t" // m163 requires Z6:Z1 to be zero during page write
|
||||
#endif
|
||||
"ldi r16,0x05 \n\t" //Write page pointed to by Z
|
||||
"sts %0,r16 \n\t"
|
||||
"spm \n\t"
|
||||
#ifdef __AVR_ATmega163__
|
||||
".word 0xFFFF \n\t"
|
||||
"nop \n\t"
|
||||
"ori r30,0x7E \n\t" // recover Z6:Z1 state after page write (had to be zero during write)
|
||||
#endif
|
||||
"wait_spm5: \n\t"
|
||||
"lds r16,%0 \n\t" //Wait for previous spm to complete
|
||||
"andi r16,1 \n\t"
|
||||
"cpi r16,1 \n\t"
|
||||
"breq wait_spm5 \n\t"
|
||||
"ldi r16,0x11 \n\t" //Re-enable RWW section
|
||||
"sts %0,r16 \n\t"
|
||||
"spm \n\t"
|
||||
#ifdef __AVR_ATmega163__
|
||||
".word 0xFFFF \n\t"
|
||||
"nop \n\t"
|
||||
#endif
|
||||
"same_page: \n\t"
|
||||
"adiw r30,2 \n\t" //Next word in FLASH
|
||||
"sbiw r24,2 \n\t" //length-2
|
||||
"breq final_write \n\t" //Finished
|
||||
"rjmp length_loop \n\t"
|
||||
"final_write: \n\t"
|
||||
"cpi r17,0 \n\t"
|
||||
"breq block_done \n\t"
|
||||
"adiw r24,2 \n\t" //length+2, fool above check on length after short page write
|
||||
"rjmp write_page \n\t"
|
||||
"block_done: \n\t"
|
||||
"clr __zero_reg__ \n\t" //restore zero register
|
||||
#if defined __AVR_ATmega168__
|
||||
: "=m" (SPMCSR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31"
|
||||
#else
|
||||
: "=m" (SPMCR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31"
|
||||
#endif
|
||||
);
|
||||
/* Should really add a wait for RWW section to be enabled, don't actually need it since we never */
|
||||
/* exit the bootloader without a power cycle anyhow */
|
||||
}
|
||||
putch(0x14);
|
||||
putch(0x10);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/* Read memory block mode, length is big endian. */
|
||||
else if(ch=='t') {
|
||||
length.byte[1] = getch();
|
||||
length.byte[0] = getch();
|
||||
#if defined __AVR_ATmega128__
|
||||
if (address.word>0x7FFF) flags.rampz = 1; // No go with m256, FIXME
|
||||
else flags.rampz = 0;
|
||||
#endif
|
||||
if (getch() == 'E') flags.eeprom = 1;
|
||||
else {
|
||||
flags.eeprom = 0;
|
||||
address.word = address.word << 1; // address * 2 -> byte location
|
||||
}
|
||||
if (getch() == ' ') { // Command terminator
|
||||
putch(0x14);
|
||||
for (w=0;w < length.word;w++) { // Can handle odd and even lengths okay
|
||||
if (flags.eeprom) { // Byte access EEPROM read
|
||||
#ifdef __AVR_ATmega168__
|
||||
while(EECR & (1<<EEPE));
|
||||
EEAR = (uint16_t)(void *)address.word;
|
||||
EECR |= (1<<EERE);
|
||||
putch(EEDR);
|
||||
#else
|
||||
putch(eeprom_read_byte((void *)address.word));
|
||||
#endif
|
||||
address.word++;
|
||||
}
|
||||
else {
|
||||
|
||||
if (!flags.rampz) putch(pgm_read_byte_near(address.word));
|
||||
#if defined __AVR_ATmega128__
|
||||
else putch(pgm_read_byte_far(address.word + 0x10000));
|
||||
// Hmmmm, yuck FIXME when m256 arrvies
|
||||
#endif
|
||||
address.word++;
|
||||
}
|
||||
}
|
||||
putch(0x10);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/* Get device signature bytes */
|
||||
else if(ch=='u') {
|
||||
if (getch() == ' ') {
|
||||
putch(0x14);
|
||||
putch(SIG1);
|
||||
putch(SIG2);
|
||||
putch(SIG3);
|
||||
putch(0x10);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/* Read oscillator calibration byte */
|
||||
else if(ch=='v') {
|
||||
byte_response(0x00);
|
||||
}
|
||||
|
||||
|
||||
#ifdef MONITOR
|
||||
|
||||
/* here come the extended monitor commands by Erik Lins */
|
||||
|
||||
/* check for three times exclamation mark pressed */
|
||||
else if(ch=='!') {
|
||||
ch = getch();
|
||||
if(ch=='!') {
|
||||
ch = getch();
|
||||
if(ch=='!') {
|
||||
|
||||
#ifdef __AVR_ATmega128__
|
||||
uint16_t extaddr;
|
||||
#endif
|
||||
uint8_t addrl, addrh;
|
||||
|
||||
#ifdef CRUMB128
|
||||
PGM_P welcome = {"ATmegaBOOT / Crumb128 - (C) J.P.Kyle, E.Lins - 050815\n\r"};
|
||||
#elif defined PROBOMEGA128
|
||||
PGM_P welcome = {"ATmegaBOOT / PROBOmega128 - (C) J.P.Kyle, E.Lins - 050815\n\r"};
|
||||
#elif defined SAVVY128
|
||||
PGM_P welcome = {"ATmegaBOOT / Savvy128 - (C) J.P.Kyle, E.Lins - 050815\n\r"};
|
||||
#endif
|
||||
|
||||
/* turn on LED */
|
||||
LED_DDR |= _BV(LED);
|
||||
LED_PORT &= ~_BV(LED);
|
||||
|
||||
/* print a welcome message and command overview */
|
||||
for(i=0; welcome[i] != '\0'; ++i) {
|
||||
putch(welcome[i]);
|
||||
}
|
||||
|
||||
/* test for valid commands */
|
||||
for(;;) {
|
||||
putch('\n');
|
||||
putch('\r');
|
||||
putch(':');
|
||||
putch(' ');
|
||||
|
||||
ch = getch();
|
||||
putch(ch);
|
||||
|
||||
/* toggle LED */
|
||||
if(ch == 't') {
|
||||
if(bit_is_set(LED_PIN,LED)) {
|
||||
LED_PORT &= ~_BV(LED);
|
||||
putch('1');
|
||||
} else {
|
||||
LED_PORT |= _BV(LED);
|
||||
putch('0');
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/* read byte from address */
|
||||
else if(ch == 'r') {
|
||||
ch = getch(); putch(ch);
|
||||
addrh = gethex();
|
||||
addrl = gethex();
|
||||
putch('=');
|
||||
ch = *(uint8_t *)((addrh << 8) + addrl);
|
||||
puthex(ch);
|
||||
}
|
||||
|
||||
/* write a byte to address */
|
||||
else if(ch == 'w') {
|
||||
ch = getch(); putch(ch);
|
||||
addrh = gethex();
|
||||
addrl = gethex();
|
||||
ch = getch(); putch(ch);
|
||||
ch = gethex();
|
||||
*(uint8_t *)((addrh << 8) + addrl) = ch;
|
||||
|
||||
}
|
||||
|
||||
/* read from uart and echo back */
|
||||
else if(ch == 'u') {
|
||||
for(;;) {
|
||||
putch(getch());
|
||||
}
|
||||
}
|
||||
#ifdef __AVR_ATmega128__
|
||||
/* external bus loop */
|
||||
else if(ch == 'b') {
|
||||
putch('b');
|
||||
putch('u');
|
||||
putch('s');
|
||||
MCUCR = 0x80;
|
||||
XMCRA = 0;
|
||||
XMCRB = 0;
|
||||
extaddr = 0x1100;
|
||||
for(;;) {
|
||||
ch = *(volatile uint8_t *)extaddr;
|
||||
if(++extaddr == 0) {
|
||||
extaddr = 0x1100;
|
||||
}
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
else if(ch == 'j') {
|
||||
app_start();
|
||||
}
|
||||
|
||||
}
|
||||
/* end of monitor functions */
|
||||
|
||||
}
|
||||
}
|
||||
}
|
||||
/* end of monitor */
|
||||
#endif
|
||||
|
||||
|
||||
}
|
||||
/* end of forever loop */
|
||||
|
||||
}
|
||||
|
||||
|
||||
char gethex(void) {
|
||||
char ah,al;
|
||||
|
||||
ah = getch(); putch(ah);
|
||||
al = getch(); putch(al);
|
||||
if(ah >= 'a') {
|
||||
ah = ah - 'a' + 0x0a;
|
||||
} else if(ah >= '0') {
|
||||
ah -= '0';
|
||||
}
|
||||
if(al >= 'a') {
|
||||
al = al - 'a' + 0x0a;
|
||||
} else if(al >= '0') {
|
||||
al -= '0';
|
||||
}
|
||||
return (ah << 4) + al;
|
||||
}
|
||||
|
||||
|
||||
void puthex(char ch) {
|
||||
char ah,al;
|
||||
|
||||
ah = (ch & 0xf0) >> 4;
|
||||
if(ah >= 0x0a) {
|
||||
ah = ah - 0x0a + 'a';
|
||||
} else {
|
||||
ah += '0';
|
||||
}
|
||||
al = (ch & 0x0f);
|
||||
if(al >= 0x0a) {
|
||||
al = al - 0x0a + 'a';
|
||||
} else {
|
||||
al += '0';
|
||||
}
|
||||
putch(ah);
|
||||
putch(al);
|
||||
}
|
||||
|
||||
|
||||
void putch(char ch)
|
||||
{
|
||||
#ifdef __AVR_ATmega128__
|
||||
if(bootuart == 1) {
|
||||
while (!(UCSR0A & _BV(UDRE0)));
|
||||
UDR0 = ch;
|
||||
}
|
||||
else if (bootuart == 2) {
|
||||
while (!(UCSR1A & _BV(UDRE1)));
|
||||
UDR1 = ch;
|
||||
}
|
||||
#elif defined __AVR_ATmega168__
|
||||
while (!(UCSR0A & _BV(UDRE0)));
|
||||
UDR0 = ch;
|
||||
#else
|
||||
/* m8,16,32,169,8515,8535,163 */
|
||||
while (!(UCSRA & _BV(UDRE)));
|
||||
UDR = ch;
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
char getch(void)
|
||||
{
|
||||
#ifdef __AVR_ATmega128__
|
||||
if(bootuart == 1) {
|
||||
while(!(UCSR0A & _BV(RXC0)));
|
||||
return UDR0;
|
||||
}
|
||||
else if(bootuart == 2) {
|
||||
while(!(UCSR1A & _BV(RXC1)));
|
||||
return UDR1;
|
||||
}
|
||||
return 0;
|
||||
#elif defined __AVR_ATmega168__
|
||||
uint32_t count = 0;
|
||||
while(!(UCSR0A & _BV(RXC0))){
|
||||
/* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/
|
||||
/* HACKME:: here is a good place to count times*/
|
||||
count++;
|
||||
if (count > MAX_TIME_COUNT)
|
||||
app_start();
|
||||
}
|
||||
return UDR0;
|
||||
#else
|
||||
/* m8,16,32,169,8515,8535,163 */
|
||||
uint32_t count = 0;
|
||||
while(!(UCSRA & _BV(RXC))){
|
||||
/* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/
|
||||
/* HACKME:: here is a good place to count times*/
|
||||
count++;
|
||||
if (count > MAX_TIME_COUNT)
|
||||
app_start();
|
||||
}
|
||||
return UDR;
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
void getNch(uint8_t count)
|
||||
{
|
||||
uint8_t i;
|
||||
for(i=0;i<count;i++) {
|
||||
#ifdef __AVR_ATmega128__
|
||||
if(bootuart == 1) {
|
||||
while(!(UCSR0A & _BV(RXC0)));
|
||||
UDR0;
|
||||
}
|
||||
else if(bootuart == 2) {
|
||||
while(!(UCSR1A & _BV(RXC1)));
|
||||
UDR1;
|
||||
}
|
||||
#elif defined __AVR_ATmega168__
|
||||
while(!(UCSR0A & _BV(RXC0)));
|
||||
UDR0;
|
||||
#else
|
||||
/* m8,16,32,169,8515,8535,163 */
|
||||
/* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/
|
||||
//while(!(UCSRA & _BV(RXC)));
|
||||
//UDR;
|
||||
uint8_t i;
|
||||
for(i=0;i<count;i++) {
|
||||
getch(); // need to handle time out
|
||||
}
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
void byte_response(uint8_t val)
|
||||
{
|
||||
if (getch() == ' ') {
|
||||
putch(0x14);
|
||||
putch(val);
|
||||
putch(0x10);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
void nothing_response(void)
|
||||
{
|
||||
if (getch() == ' ') {
|
||||
putch(0x14);
|
||||
putch(0x10);
|
||||
}
|
||||
}
|
||||
|
||||
void flash_led(uint8_t count)
|
||||
{
|
||||
/* flash onboard LED three times to signal entering of bootloader */
|
||||
uint32_t l;
|
||||
|
||||
if (count == 0) {
|
||||
count = 3;
|
||||
}
|
||||
|
||||
for (i = 0; i < count; ++i) {
|
||||
LED_PORT |= _BV(LED);
|
||||
for(l = 0; l < (2 * F_CPU); ++l);
|
||||
LED_PORT &= ~_BV(LED);
|
||||
for(l = 0; l < (F_CPU / 5); ++l);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/* end of file ATmegaBOOT.c */
|
||||
121
bootloaderBT/ATmegaBOOT_168.hex
Normal file
121
bootloaderBT/ATmegaBOOT_168.hex
Normal file
@ -0,0 +1,121 @@
|
||||
:103800000C94341C0C944F1C0C944F1C0C944F1CA7
|
||||
:103810000C944F1C0C944F1C0C944F1C0C944F1C7C
|
||||
:103820000C944F1C0C944F1C0C944F1C0C944F1C6C
|
||||
:103830000C944F1C0C944F1C0C944F1C0C944F1C5C
|
||||
:103840000C944F1C0C944F1C0C944F1C0C944F1C4C
|
||||
:103850000C944F1C0C944F1C0C944F1C0C944F1C3C
|
||||
:103860000C944F1C0C944F1C11241FBECFEFD4E0BE
|
||||
:10387000DEBFCDBF11E0A0E0B1E0E0E6FFE302C0B3
|
||||
:1038800005900D92A230B107D9F712E0A2E0B1E0A5
|
||||
:1038900001C01D92AC30B107E1F70C94D61C0C941A
|
||||
:1038A000001C882309F483E01092090290E0981725
|
||||
:1038B000F0F4692F2D9A2FEF37E448EE51E02253B0
|
||||
:1038C00030404040504057FFFACF2D982FEF33ED56
|
||||
:1038D00040E350E0225330404040504057FFFACF81
|
||||
:1038E000962F9F5F692F981728F3909309020895E8
|
||||
:1038F000982F8091C00085FFFCCF9093C60008955B
|
||||
:10390000EF92FF920F931F93EE24FF248701809183
|
||||
:10391000C00087FD17C00894E11CF11C011D111D9A
|
||||
:1039200081E0E81682E1F8068AE7080780E01807D8
|
||||
:1039300070F3E0910201F091030109958091C000BC
|
||||
:1039400087FFE9CF8091C600992787FD90951F9149
|
||||
:103950000F91FF90EF9008950E94801C803209F033
|
||||
:10396000089584E10E94781C80E10E94781C0895EB
|
||||
:10397000CF93C82F0E94801C803249F484E10E94BA
|
||||
:10398000781C8C2F0E94781C80E10E94781CCF91BB
|
||||
:103990000895282F90E007C08091C0008823E4F7A5
|
||||
:1039A0008091C6009F5F9217B8F30895CFEFD4E0DF
|
||||
:1039B000DEBFCDBF000056985E9A1092C50088E029
|
||||
:1039C0008093C40088E18093C10086E08093C200A8
|
||||
:1039D000259A579A5F9A109209022FE080E090E0B2
|
||||
:1039E0000197F1F7215027FFF9CF20E12093090239
|
||||
:1039F0005F9883E00E94511C83E50E94781C85E457
|
||||
:103A00000E94781C84E50E94781C80E20E94781C49
|
||||
:103A100082E40E94781C84E50E94781C80E20E9467
|
||||
:103A2000781C80E50E94781C81E40E94781C87E461
|
||||
:103A30000E94781C85E40E94781C8DE40E94781C0A
|
||||
:103A40008FE40E94781C84E40E94781C85E40E9424
|
||||
:103A5000781C80E20E94781C83E30E94781C80E23C
|
||||
:103A60000E94781C82E30E94781C80E30E94781CEC
|
||||
:103A700080E30E94781C80E30E94781C80E20E9410
|
||||
:103A8000781C81E30E94781C8DE00E94781C83E5FD
|
||||
:103A90000E94781C85E40E94781C84E50E94781CB2
|
||||
:103AA00080E20E94781C82E40E94781C84E50E94D7
|
||||
:103AB000781C80E20E94781C82E50E94781C8FE4CA
|
||||
:103AC0000E94781C8CE40E94781C85E40E94781C7B
|
||||
:103AD00080E20E94781C80E30E94781C80E20E94B1
|
||||
:103AE000781C86E60E94781C80E20E94781C87E39E
|
||||
:103AF0000E94781C84E60E94781C80E30E94781C57
|
||||
:103B000080E30E94781C8DE00E94781C0E94801C3B
|
||||
:103B1000803361F1813369F1803409F449C0813423
|
||||
:103B200009F44FC0823409F45DC0853409F460C0E3
|
||||
:103B30008035E1F08135D1F08235C1F0853509F469
|
||||
:103B40005BC0863509F463C0843609F465C08437E8
|
||||
:103B500009F4B9C0853709F414C18637B9F680E095
|
||||
:103B60000E94B81C0E94801C8033A1F60E94AC1CED
|
||||
:103B7000CDCF0E94801CC82F803241F684E10E9484
|
||||
:103B8000781C81E40E94781C86E50E94781C82E5FE
|
||||
:103B90000E94781C8C2F0E94781C89E40E94781C5B
|
||||
:103BA00083E50E94781C80E50E94781C80E1ACCF00
|
||||
:103BB0000E94801C8638D0F20E94801C0E94AC1C9F
|
||||
:103BC000A5CF0E94801C803809F4EDC0813809F42B
|
||||
:103BD000EEC0823809F4EFC0883909F683E00E940C
|
||||
:103BE000B81CC0CF84E10E94C91C0E94AC1C8ECFBF
|
||||
:103BF00085E00E94C91CF9CF0E94801C80930501BA
|
||||
:103C00000E94801C809306010E94AC1C7FCF84E040
|
||||
:103C10000E94C91C80E0A4CF0E94801C80930802EF
|
||||
:103C20000E94801C8093070280910B028E7F8093FC
|
||||
:103C30000B020E94801C853409F4C1C000E010E032
|
||||
:103C400080910702909108021816190670F4C7E0D7
|
||||
:103C5000D1E00E94801C89930F5F1F4F8091070263
|
||||
:103C60009091080208171907A0F30E94801C803267
|
||||
:103C700009F04CCF80910B0280FFADC000E010E056
|
||||
:103C8000209107023091080212161306C0F4E09149
|
||||
:103C90000501F0910601A7E0B1E0F999FECFF2BD70
|
||||
:103CA000E1BD8D9180BDFA9AF99A31960F5F1F4F51
|
||||
:103CB0000217130790F3F0930601E093050184E1E6
|
||||
:103CC0000E94781C73CF0E94801C809308020E947F
|
||||
:103CD000801C809307020E94801C853409F475C003
|
||||
:103CE00080910B028E7F80930B0280910501909151
|
||||
:103CF0000601880F991F90930601809305010E9489
|
||||
:103D0000801C803209F002CF84E10E94781C00E020
|
||||
:103D100010E020910702309108021216130608F0F5
|
||||
:103D200045CFE0910501F091060180910B0280FFE3
|
||||
:103D30001FC0F999FECFF2BDE1BDF89A80B50E948F
|
||||
:103D4000781CE0910501F09106013196F09306018F
|
||||
:103D5000E093050120910702309108020F5F1F4F89
|
||||
:103D60000217130708F022CF80910B0280FDE1CFEC
|
||||
:103D7000869580FF9BC03196F0930601E093050184
|
||||
:103D8000EDCF0E94801C803209F0C0CE84E10E94F9
|
||||
:103D9000781C8EE10E94781C84E90E94781C86E0E1
|
||||
:103DA0000E94781C03CF82E00E94B81CDBCE81E029
|
||||
:103DB0000E94B81CD7CE8FE00E94B81CD3CE809151
|
||||
:103DC0000B02816080930B0239CF80910B028160DE
|
||||
:103DD00080930B0294CF8091060187FD73C01092EF
|
||||
:103DE0000A028091050190910601880F991F909316
|
||||
:103DF0000601809305018091070280FF09C0809130
|
||||
:103E0000070290910802019690930802809307029E
|
||||
:103E1000F894F999FECF1127E0910501F091060180
|
||||
:103E2000C7E0D1E08091070290910802103091F430
|
||||
:103E30000091570001700130D9F303E0009357005F
|
||||
:103E4000E8950091570001700130D9F301E100932A
|
||||
:103E50005700E895099019900091570001700130C2
|
||||
:103E6000D9F301E000935700E8951395103498F0CA
|
||||
:103E700011270091570001700130D9F305E000933C
|
||||
:103E80005700E8950091570001700130D9F301E126
|
||||
:103E900000935700E8953296029709F0C7CF10308B
|
||||
:103EA00011F00296E5CF112484E10ACF84910E949B
|
||||
:103EB000781C2091070230910802E0910501F091F1
|
||||
:103EC000060159CF81E080930A028BCF1F93CF93D5
|
||||
:103ED0000E94801CC82F0E94781C0E94801C182FF2
|
||||
:103EE0000E94781CC1362CF0C75511363CF017558E
|
||||
:103EF00008C0C033D4F3C0531136CCF710330CF0E4
|
||||
:103F00001053C295C07FC10F8C2F992787FD9095C4
|
||||
:103F1000CF911F910895CF93282F992787FD9095D2
|
||||
:103F2000807F9070959587959595879595958795C0
|
||||
:103F3000959587958A303CF0895AC22FCF70CA3048
|
||||
:103F40003CF0C95A06C0805DC22FCF70CA30CCF792
|
||||
:103F5000C05D0E94781C8C2F0E94781CCF91089520
|
||||
:023F60008000DF
|
||||
:0400000300003800C1
|
||||
:00000001FF
|
||||
Loading…
x
Reference in New Issue
Block a user