rooty/Arduino
1
0
Fork 0
mirror of https://github.com/arduino/Arduino.git synced 2025-02-20 14:54:31 +01:00
Code Issues Releases Activity

Merge branch 'serial-patch-2' into ide-1.5.x

Browse Source
This commit is contained in:
Cristian Maglie 2014-01-27 22:48:17 +01:00
commit 5b48b1e4fe
9 changed files with 476 additions and 384 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
hardware/arduino/avr/cores/arduino/Arduino.h
View File

@ -88,6 +88,10 @@ void yield(void);
#define bitClear(value, bit) ((value) &= ~(1UL << (bit)))
#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit))
// avr-libc defines _NOP() since 1.6.2
#ifndef _NOP
#define _NOP() do { __asm__ volatile ("nop"); } while (0)
#endif
typedef unsigned int word;
@ -196,6 +200,10 @@ extern const uint8_t PROGMEM digital_pin_to_timer_PGM[];
#include "WCharacter.h"
#include "WString.h"
#include "HardwareSerial.h"
#include "USBAPI.h"
#if defined(HAVE_HWSERIAL0) && defined(HAVE_CDCSERIAL)
#error "Targets with both UART0 and CDC serial not supported"
#endif
uint16_t makeWord(uint16_t w);
uint16_t makeWord(byte h, byte l);

431
hardware/arduino/avr/cores/arduino/HardwareSerial.cpp
View File

@ -26,348 +26,112 @@
#include <string.h>
#include <inttypes.h>
#include "Arduino.h"
#include "wiring_private.h"
#include "HardwareSerial.h"
#include "HardwareSerial_private.h"
// this next line disables the entire HardwareSerial.cpp,
// this is so I can support Attiny series and any other chip without a uart
#if defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H)
#if defined(HAVE_HWSERIAL0) || defined(HAVE_HWSERIAL1) || defined(HAVE_HWSERIAL2) || defined(HAVE_HWSERIAL3)
#include "HardwareSerial.h"
/*
* on ATmega8, the uart and its bits are not numbered, so there is no "TXC0"
* definition.
*/
#if !defined(TXC0)
#if defined(TXC)
#define TXC0 TXC
#elif defined(TXC1)
// Some devices have uart1 but no uart0
#define TXC0 TXC1
#else
#error TXC0 not definable in HardwareSerial.h
#endif
#endif
inline void store_char(unsigned char c, HardwareSerial *s)
{
int i = (unsigned int)(s->_rx_buffer_head + 1) % SERIAL_BUFFER_SIZE;
// if we should be storing the received character into the location
// just before the tail (meaning that the head would advance to the
// current location of the tail), we're about to overflow the buffer
// and so we don't write the character or advance the head.
if (i != s->_rx_buffer_tail) {
s->_rx_buffer[s->_rx_buffer_head] = c;
s->_rx_buffer_head = i;
}
}
#if !defined(USART0_RX_vect) && defined(USART1_RX_vect)
// do nothing - on the 32u4 the first USART is USART1
#else
#if !defined(USART_RX_vect) && !defined(USART0_RX_vect) && \
!defined(USART_RXC_vect)
#error "Don't know what the Data Received vector is called for the first UART"
#else
// SerialEvent functions are weak, so when the user doesn't define them,
// the linker just sets their address to 0 (which is checked below).
// The Serialx_available is just a wrapper around Serialx.available(),
// but we can refer to it weakly so we don't pull in the entire
// HardwareSerial instance if the user doesn't also refer to it.
#if defined(HAVE_HWSERIAL0)
void serialEvent() __attribute__((weak));
void serialEvent() {}
#define serialEvent_implemented
#if defined(USART_RX_vect)
ISR(USART_RX_vect)
#elif defined(USART0_RX_vect)
ISR(USART0_RX_vect)
#elif defined(USART_RXC_vect)
ISR(USART_RXC_vect) // ATmega8
#endif
{
#if defined(UDR0)
if (bit_is_clear(UCSR0A, UPE0)) {
unsigned char c = UDR0;
store_char(c, &Serial);
} else {
unsigned char c = UDR0;
};
#elif defined(UDR)
if (bit_is_clear(UCSRA, PE)) {
unsigned char c = UDR;
store_char(c, &Serial);
} else {
unsigned char c = UDR;
};
#else
#error UDR not defined
#endif
}
#endif
bool Serial0_available() __attribute__((weak));
#endif
#if defined(USART1_RX_vect)
#if defined(HAVE_HWSERIAL1)
void serialEvent1() __attribute__((weak));
void serialEvent1() {}
#define serialEvent1_implemented
ISR(USART1_RX_vect)
{
if (bit_is_clear(UCSR1A, UPE1)) {
unsigned char c = UDR1;
store_char(c, &Serial1);
} else {
unsigned char c = UDR1;
};
}
bool Serial1_available() __attribute__((weak));
#endif
#if defined(USART2_RX_vect) && defined(UDR2)
#if defined(HAVE_HWSERIAL2)
void serialEvent2() __attribute__((weak));
void serialEvent2() {}
#define serialEvent2_implemented
ISR(USART2_RX_vect)
{
if (bit_is_clear(UCSR2A, UPE2)) {
unsigned char c = UDR2;
store_char(c, &Serial2);
} else {
unsigned char c = UDR2;
};
}
bool Serial2_available() __attribute__((weak));
#endif
#if defined(USART3_RX_vect) && defined(UDR3)
#if defined(HAVE_HWSERIAL3)
void serialEvent3() __attribute__((weak));
void serialEvent3() {}
#define serialEvent3_implemented
ISR(USART3_RX_vect)
{
if (bit_is_clear(UCSR3A, UPE3)) {
unsigned char c = UDR3;
store_char(c, &Serial3);
} else {
unsigned char c = UDR3;
};
}
bool Serial3_available() __attribute__((weak));
#endif
void serialEventRun(void)
{
#ifdef serialEvent_implemented
if (Serial.available()) serialEvent();
#if defined(HAVE_HWSERIAL0)
if (Serial0_available && serialEvent && Serial0_available()) serialEvent();
#endif
#ifdef serialEvent1_implemented
if (Serial1.available()) serialEvent1();
#if defined(HAVE_HWSERIAL1)
if (Serial1_available && serialEvent1 && Serial1_available()) serialEvent1();
#endif
#ifdef serialEvent2_implemented
if (Serial2.available()) serialEvent2();
#if defined(HAVE_HWSERIAL2)
if (Serial2_available && serialEvent2 && Serial2_available()) serialEvent2();
#endif
#ifdef serialEvent3_implemented
if (Serial3.available()) serialEvent3();
#if defined(HAVE_HWSERIAL3)
if (Serial3_available && serialEvent2 && Serial3_available()) serialEvent3();
#endif
}
// Actual interrupt handlers //////////////////////////////////////////////////////////////
#if !defined(USART0_UDRE_vect) && defined(USART1_UDRE_vect)
// do nothing - on the 32u4 the first USART is USART1
#else
#if !defined(UART0_UDRE_vect) && !defined(UART_UDRE_vect) && !defined(USART0_UDRE_vect) && !defined(USART_UDRE_vect)
#error "Don't know what the Data Register Empty vector is called for the first UART"
#else
#if defined(UART0_UDRE_vect)
ISR(UART0_UDRE_vect)
#elif defined(UART_UDRE_vect)
ISR(UART_UDRE_vect)
#elif defined(USART0_UDRE_vect)
ISR(USART0_UDRE_vect)
#elif defined(USART_UDRE_vect)
ISR(USART_UDRE_vect)
#endif
void HardwareSerial::_tx_udr_empty_irq(void)
{
if (Serial._tx_buffer_head == Serial._tx_buffer_tail) {
// Buffer empty, so disable interrupts
#if defined(UCSR0B)
cbi(UCSR0B, UDRIE0);
#else
cbi(UCSRB, UDRIE);
#endif
}
else {
// There is more data in the output buffer. Send the next byte
unsigned char c = Serial._tx_buffer[Serial._tx_buffer_tail];
Serial._tx_buffer_tail = (Serial._tx_buffer_tail + 1) % SERIAL_BUFFER_SIZE;
#if defined(UDR0)
UDR0 = c;
#elif defined(UDR)
UDR = c;
#else
#error UDR not defined
#endif
}
}
#endif
#endif
// If interrupts are enabled, there must be more data in the output
// buffer. Send the next byte
unsigned char c = _tx_buffer[_tx_buffer_tail];
_tx_buffer_tail = (_tx_buffer_tail + 1) % SERIAL_BUFFER_SIZE;
#ifdef USART1_UDRE_vect
ISR(USART1_UDRE_vect)
{
if (Serial1._tx_buffer_head == Serial1._tx_buffer_tail) {
// Buffer empty, so disable interrupts
cbi(UCSR1B, UDRIE1);
}
else {
// There is more data in the output buffer. Send the next byte
unsigned char c = Serial1._tx_buffer[Serial1._tx_buffer_tail];
Serial1._tx_buffer_tail = (Serial1._tx_buffer_tail + 1) % SERIAL_BUFFER_SIZE;
UDR1 = c;
}
}
#endif
*_udr = c;
#ifdef USART2_UDRE_vect
ISR(USART2_UDRE_vect)
{
if (Serial2._tx_buffer_head == Serial2._tx_buffer_tail) {
// Buffer empty, so disable interrupts
cbi(UCSR2B, UDRIE2);
}
else {
// There is more data in the output buffer. Send the next byte
unsigned char c = Serial2._tx_buffer[Serial2._tx_buffer_tail];
Serial2._tx_buffer_tail = (Serial2._tx_buffer_tail + 1) % SERIAL_BUFFER_SIZE;
UDR2 = c;
}
}
#endif
// clear the TXC bit -- "can be cleared by writing a one to its bit
// location". This makes sure flush() won't return until the bytes
// actually got written
sbi(*_ucsra, TXC0);
#ifdef USART3_UDRE_vect
ISR(USART3_UDRE_vect)
{
if (Serial3._tx_buffer_head == Serial3._tx_buffer_tail) {
// Buffer empty, so disable interrupts
cbi(UCSR3B, UDRIE3);
if (_tx_buffer_head == _tx_buffer_tail) {
// Buffer empty, so disable interrupts
cbi(*_ucsrb, UDRIE0);
}
else {
// There is more data in the output buffer. Send the next byte
unsigned char c = Serial3._tx_buffer[Serial3._tx_buffer_tail];
Serial3._tx_buffer_tail = (Serial3._tx_buffer_tail + 1) % SERIAL_BUFFER_SIZE;
UDR3 = c;
}
}
#endif
// Constructors ////////////////////////////////////////////////////////////////
HardwareSerial::HardwareSerial(
volatile uint8_t *ubrrh, volatile uint8_t *ubrrl,
volatile uint8_t *ucsra, volatile uint8_t *ucsrb,
volatile uint8_t *ucsrc, volatile uint8_t *udr,
uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udrie, uint8_t u2x)
{
_tx_buffer_head = _tx_buffer_tail = 0;
_rx_buffer_head = _rx_buffer_tail = 0;
_ubrrh = ubrrh;
_ubrrl = ubrrl;
_ucsra = ucsra;
_ucsrb = ucsrb;
_ucsrc = ucsrc;
_udr = udr;
_rxen = rxen;
_txen = txen;
_rxcie = rxcie;
_udrie = udrie;
_u2x = u2x;
}
// Public Methods //////////////////////////////////////////////////////////////
void HardwareSerial::begin(unsigned long baud)
{
uint16_t baud_setting;
bool use_u2x = true;
#if F_CPU == 16000000UL
// hardcoded exception for compatibility with the bootloader shipped
// with the Duemilanove and previous boards and the firmware on the 8U2
// on the Uno and Mega 2560.
if (baud == 57600) {
use_u2x = false;
}
#endif
try_again:
if (use_u2x) {
*_ucsra = 1 << _u2x;
baud_setting = (F_CPU / 4 / baud - 1) / 2;
} else {
*_ucsra = 0;
baud_setting = (F_CPU / 8 / baud - 1) / 2;
}
if ((baud_setting > 4095) && use_u2x)
{
use_u2x = false;
goto try_again;
}
// assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register)
*_ubrrh = baud_setting >> 8;
*_ubrrl = baud_setting;
transmitting = false;
sbi(*_ucsrb, _rxen);
sbi(*_ucsrb, _txen);
sbi(*_ucsrb, _rxcie);
cbi(*_ucsrb, _udrie);
}
void HardwareSerial::begin(unsigned long baud, byte config)
{
uint16_t baud_setting;
uint8_t current_config;
bool use_u2x = true;
// Try u2x mode first
uint16_t baud_setting = (F_CPU / 4 / baud - 1) / 2;
*_ucsra = 1 << U2X0;
#if F_CPU == 16000000UL
// hardcoded exception for compatibility with the bootloader shipped
// with the Duemilanove and previous boards and the firmware on the 8U2
// on the Uno and Mega 2560.
if (baud == 57600) {
use_u2x = false;
}
#endif
try_again:
if (use_u2x) {
*_ucsra = 1 << _u2x;
baud_setting = (F_CPU / 4 / baud - 1) / 2;
} else {
// hardcoded exception for 57600 for compatibility with the bootloader
// shipped with the Duemilanove and previous boards and the firmware
// on the 8U2 on the Uno and Mega 2560. Also, The baud_setting cannot
// be > 4095, so switch back to non-u2x mode if the baud rate is too
// low.
if (((F_CPU == 16000000UL) && (baud == 57600)) || (baud_setting >4095))
{
*_ucsra = 0;
baud_setting = (F_CPU / 8 / baud - 1) / 2;
}
if ((baud_setting > 4095) && use_u2x)
{
use_u2x = false;
goto try_again;
}
// assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register)
*_ubrrh = baud_setting >> 8;
*_ubrrl = baud_setting;
_written = false;
//set the data bits, parity, and stop bits
#if defined(__AVR_ATmega8__)
config |= 0x80; // select UCSRC register (shared with UBRRH)
#endif
*_ucsrc = config;
sbi(*_ucsrb, _rxen);
sbi(*_ucsrb, _txen);
sbi(*_ucsrb, _rxcie);
cbi(*_ucsrb, _udrie);
sbi(*_ucsrb, RXEN0);
sbi(*_ucsrb, TXEN0);
sbi(*_ucsrb, RXCIE0);
cbi(*_ucsrb, UDRIE0);
}
void HardwareSerial::end()
@ -376,10 +140,10 @@ void HardwareSerial::end()
while (_tx_buffer_head != _tx_buffer_tail)
;
cbi(*_ucsrb, _rxen);
cbi(*_ucsrb, _txen);
cbi(*_ucsrb, _rxcie);
cbi(*_ucsrb, _udrie);
cbi(*_ucsrb, RXEN0);
cbi(*_ucsrb, TXEN0);
cbi(*_ucsrb, RXCIE0);
cbi(*_ucsrb, UDRIE0);
// clear any received data
_rx_buffer_head = _rx_buffer_tail;
@ -413,57 +177,60 @@ int HardwareSerial::read(void)
void HardwareSerial::flush()
{
// UDR is kept full while the buffer is not empty, so TXC triggers when EMPTY && SENT
while (transmitting && ! (*_ucsra & _BV(TXC0)));
transmitting = false;
// If we have never written a byte, no need to flush. This special
// case is needed since there is no way to force the TXC (transmit
// complete) bit to 1 during initialization
if (!_written)
return;
while (bit_is_set(*_ucsrb, UDRIE0) || bit_is_clear(*_ucsra, TXC0)) {
if (bit_is_clear(SREG, SREG_I) && bit_is_set(*_ucsrb, UDRIE0))
// Interrupts are globally disabled, but the DR empty
// interrupt should be enabled, so poll the DR empty flag to
// prevent deadlock
if (bit_is_set(*_ucsra, UDRE0))
_tx_udr_empty_irq();
}
// If we get here, nothing is queued anymore (DRIE is disabled) and
// the hardware finished tranmission (TXC is set).
}
size_t HardwareSerial::write(uint8_t c)
{
// If the buffer and the data register is empty, just write the byte
// to the data register and be done. This shortcut helps
// significantly improve the effective datarate at high (>
// 500kbit/s) bitrates, where interrupt overhead becomes a slowdown.
if (_tx_buffer_head == _tx_buffer_tail && bit_is_set(*_ucsra, UDRE0)) {
*_udr = c;
sbi(*_ucsra, TXC0);
return 1;
}
int i = (_tx_buffer_head + 1) % SERIAL_BUFFER_SIZE;
// If the output buffer is full, there's nothing for it other than to
// wait for the interrupt handler to empty it a bit
// ???: return 0 here instead?
while (i == _tx_buffer_tail)
;
while (i == _tx_buffer_tail) {
if (bit_is_clear(SREG, SREG_I)) {
// Interrupts are disabled, so we'll have to poll the data
// register empty flag ourselves. If it is set, pretend an
// interrupt has happened and call the handler to free up
// space for us.
if(bit_is_set(*_ucsra, UDRE0))
_tx_udr_empty_irq();
} else {
// nop, the interrupt handler will free up space for us
}
}
_tx_buffer[_tx_buffer_head] = c;
_tx_buffer_head = i;
sbi(*_ucsrb, _udrie);
// clear the TXC bit -- "can be cleared by writing a one to its bit location"
transmitting = true;
sbi(*_ucsra, TXC0);
sbi(*_ucsrb, UDRIE0);
_written = true;
return 1;
}
HardwareSerial::operator bool() {
return true;
}
// Preinstantiate Objects //////////////////////////////////////////////////////
#if defined(UBRRH) && defined(UBRRL)
HardwareSerial Serial(&UBRRH, &UBRRL, &UCSRA, &UCSRB, &UCSRC, &UDR, RXEN, TXEN, RXCIE, UDRIE, U2X);
#elif defined(UBRR0H) && defined(UBRR0L)
HardwareSerial Serial(&UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UCSR0C, &UDR0, RXEN0, TXEN0, RXCIE0, UDRIE0, U2X0);
#elif defined(USBCON)
// do nothing - Serial object and buffers are initialized in CDC code
#else
#error no serial port defined (port 0)
#endif
#if defined(UBRR1H)
HardwareSerial Serial1(&UBRR1H, &UBRR1L, &UCSR1A, &UCSR1B, &UCSR1C, &UDR1, RXEN1, TXEN1, RXCIE1, UDRIE1, U2X1);
#endif
#if defined(UBRR2H)
HardwareSerial Serial2(&UBRR2H, &UBRR2L, &UCSR2A, &UCSR2B, &UCSR2C, &UDR2, RXEN2, TXEN2, RXCIE2, UDRIE2, U2X2);
#endif
#if defined(UBRR3H)
HardwareSerial Serial3(&UBRR3H, &UBRR3L, &UCSR3A, &UCSR3B, &UCSR3C, &UDR3, RXEN3, TXEN3, RXCIE3, UDRIE3, U2X3);
#endif
#endif // whole file

104
hardware/arduino/avr/cores/arduino/HardwareSerial.h
View File

@ -37,55 +37,6 @@
#define SERIAL_BUFFER_SIZE 64
#endif
class HardwareSerial : public Stream
{
protected:
volatile uint8_t *_ubrrh;
volatile uint8_t *_ubrrl;
volatile uint8_t *_ucsra;
volatile uint8_t *_ucsrb;
volatile uint8_t *_ucsrc;
volatile uint8_t *_udr;
uint8_t _rxen;
uint8_t _txen;
uint8_t _rxcie;
uint8_t _udrie;
uint8_t _u2x;
bool transmitting;
public:
volatile uint8_t _rx_buffer_head;
volatile uint8_t _rx_buffer_tail;
volatile uint8_t _tx_buffer_head;
volatile uint8_t _tx_buffer_tail;
// Don't put any members after these buffers, since only the first
// 32 bytes of this struct can be accessed quickly using the ldd
// instruction.
unsigned char _rx_buffer[SERIAL_BUFFER_SIZE];
unsigned char _tx_buffer[SERIAL_BUFFER_SIZE];
HardwareSerial(
volatile uint8_t *ubrrh, volatile uint8_t *ubrrl,
volatile uint8_t *ucsra, volatile uint8_t *ucsrb,
volatile uint8_t *ucsrc, volatile uint8_t *udr,
uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udrie, uint8_t u2x);
void begin(unsigned long);
void begin(unsigned long, uint8_t);
void end();
virtual int available(void);
virtual int peek(void);
virtual int read(void);
virtual void flush(void);
virtual size_t write(uint8_t);
inline size_t write(unsigned long n) { return write((uint8_t)n); }
inline size_t write(long n) { return write((uint8_t)n); }
inline size_t write(unsigned int n) { return write((uint8_t)n); }
inline size_t write(int n) { return write((uint8_t)n); }
using Print::write; // pull in write(str) and write(buf, size) from Print
operator bool();
};
// Define config for Serial.begin(baud, config);
#define SERIAL_5N1 0x00
#define SERIAL_6N1 0x02
@ -112,20 +63,69 @@ class HardwareSerial : public Stream
#define SERIAL_7O2 0x3C
#define SERIAL_8O2 0x3E
class HardwareSerial : public Stream
{
protected:
volatile uint8_t * const _ubrrh;
volatile uint8_t * const _ubrrl;
volatile uint8_t * const _ucsra;
volatile uint8_t * const _ucsrb;
volatile uint8_t * const _ucsrc;
volatile uint8_t * const _udr;
// Has any byte been written to the UART since begin()
bool _written;
volatile uint8_t _rx_buffer_head;
volatile uint8_t _rx_buffer_tail;
volatile uint8_t _tx_buffer_head;
volatile uint8_t _tx_buffer_tail;
// Don't put any members after these buffers, since only the first
// 32 bytes of this struct can be accessed quickly using the ldd
// instruction.
unsigned char _rx_buffer[SERIAL_BUFFER_SIZE];
unsigned char _tx_buffer[SERIAL_BUFFER_SIZE];
public:
inline HardwareSerial(
volatile uint8_t *ubrrh, volatile uint8_t *ubrrl,
volatile uint8_t *ucsra, volatile uint8_t *ucsrb,
volatile uint8_t *ucsrc, volatile uint8_t *udr);
void begin(unsigned long baud) { begin(baud, SERIAL_8N1); }
void begin(unsigned long, uint8_t);
void end();
virtual int available(void);
virtual int peek(void);
virtual int read(void);
virtual void flush(void);
virtual size_t write(uint8_t);
inline size_t write(unsigned long n) { return write((uint8_t)n); }
inline size_t write(long n) { return write((uint8_t)n); }
inline size_t write(unsigned int n) { return write((uint8_t)n); }
inline size_t write(int n) { return write((uint8_t)n); }
using Print::write; // pull in write(str) and write(buf, size) from Print
operator bool() { return true; }
// Interrupt handlers - Not intended to be called externally
inline void _rx_complete_irq(void);
void _tx_udr_empty_irq(void);
};
#if defined(UBRRH) || defined(UBRR0H)
extern HardwareSerial Serial;
#elif defined(USBCON)
#include "USBAPI.h"
// extern HardwareSerial Serial_;
#define HAVE_HWSERIAL0
#endif
#if defined(UBRR1H)
extern HardwareSerial Serial1;
#define HAVE_HWSERIAL1
#endif
#if defined(UBRR2H)
extern HardwareSerial Serial2;
#define HAVE_HWSERIAL2
#endif
#if defined(UBRR3H)
extern HardwareSerial Serial3;
#define HAVE_HWSERIAL3
#endif
extern void serialEventRun(void) __attribute__((weak));

55
hardware/arduino/avr/cores/arduino/HardwareSerial0.cpp Normal file
View File

@ -0,0 +1,55 @@
#include "Arduino.h"
#include "HardwareSerial.h"
#include "HardwareSerial_private.h"
// Each HardwareSerial is defined in its own file, sine the linker pulls
// in the entire file when any element inside is used. --gc-sections can
// additionally cause unused symbols to be dropped, but ISRs have the
// "used" attribute so are never dropped and they keep the
// HardwareSerial instance in as well. Putting each instance in its own
// file prevents the linker from pulling in any unused instances in the
// first place.
#if defined(HAVE_HWSERIAL0)
#if defined(USART_RX_vect)
ISR(USART_RX_vect)
#elif defined(USART0_RX_vect)
ISR(USART0_RX_vect)
#elif defined(USART_RXC_vect)
ISR(USART_RXC_vect) // ATmega8
#else
#error "Don't know what the Data Received vector is called for the first UART"
#endif
{
Serial._rx_complete_irq();
}
#if defined(UART0_UDRE_vect)
ISR(UART0_UDRE_vect)
#elif defined(UART_UDRE_vect)
ISR(UART_UDRE_vect)
#elif defined(USART0_UDRE_vect)
ISR(USART0_UDRE_vect)
#elif defined(USART_UDRE_vect)
ISR(USART_UDRE_vect)
#else
#error "Don't know what the Data Register Empty vector is called for the first UART"
#endif
{
Serial._tx_udr_empty_irq();
}
#if defined(UBRRH) && defined(UBRRL)
HardwareSerial Serial(&UBRRH, &UBRRL, &UCSRA, &UCSRB, &UCSRC, &UDR);
#else
HardwareSerial Serial(&UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UCSR0C, &UDR0);
#endif
// Function that can be weakly referenced by serialEventRun to prevent
// pulling in this file if it's not otherwise used.
bool Serial0_available() {
return Serial.available();
}
#endif // HAVE_HWSERIAL0

55
hardware/arduino/avr/cores/arduino/HardwareSerial1.cpp Normal file
View File

@ -0,0 +1,55 @@
#include "Arduino.h"
#include "HardwareSerial.h"
#include "HardwareSerial_private.h"
// Each HardwareSerial is defined in its own file, sine the linker pulls
// in the entire file when any element inside is used. --gc-sections can
// additionally cause unused symbols to be dropped, but ISRs have the
// "used" attribute so are never dropped and they keep the
// HardwareSerial instance in as well. Putting each instance in its own
// file prevents the linker from pulling in any unused instances in the
// first place.
#if defined(HAVE_HWSERIAL1)
#if defined(USART_RX_vect)
ISR(USART_RX_vect)
#elif defined(USART1_RX_vect)
ISR(USART1_RX_vect)
#elif defined(USART_RXC_vect)
ISR(USART_RXC_vect) // ATmega8
#else
#error "Don't know what the Data Received vector is called for the first UART"
#endif
{
Serial1._rx_complete_irq();
}
#if defined(UART1_UDRE_vect)
ISR(UART1_UDRE_vect)
#elif defined(UART_UDRE_vect)
ISR(UART_UDRE_vect)
#elif defined(USART1_UDRE_vect)
ISR(USART1_UDRE_vect)
#elif defined(USART_UDRE_vect)
ISR(USART_UDRE_vect)
#else
#error "Don't know what the Data Register Empty vector is called for the first UART"
#endif
{
Serial1._tx_udr_empty_irq();
}
#if defined(UBRRH) && defined(UBRRL)
HardwareSerial Serial1(&UBRRH, &UBRRL, &UCSRA, &UCSRB, &UCSRC, &UDR);
#else
HardwareSerial Serial1(&UBRR1H, &UBRR1L, &UCSR1A, &UCSR1B, &UCSR1C, &UDR1);
#endif
// Function that can be weakly referenced by serialEventRun to prevent
// pulling in this file if it's not otherwise used.
bool Serial1_available() {
return Serial1.available();
}
#endif // HAVE_HWSERIAL1

55
hardware/arduino/avr/cores/arduino/HardwareSerial2.cpp Normal file
View File

@ -0,0 +1,55 @@
#include "Arduino.h"
#include "HardwareSerial.h"
#include "HardwareSerial_private.h"
// Each HardwareSerial is defined in its own file, sine the linker pulls
// in the entire file when any element inside is used. --gc-sections can
// additionally cause unused symbols to be dropped, but ISRs have the
// "used" attribute so are never dropped and they keep the
// HardwareSerial instance in as well. Putting each instance in its own
// file prevents the linker from pulling in any unused instances in the
// first place.
#if defined(HAVE_HWSERIAL2)
#if defined(USART_RX_vect)
ISR(USART_RX_vect)
#elif defined(USART2_RX_vect)
ISR(USART2_RX_vect)
#elif defined(USART_RXC_vect)
ISR(USART_RXC_vect) // ATmega8
#else
#error "Don't know what the Data Received vector is called for the first UART"
#endif
{
Serial2._rx_complete_irq();
}
#if defined(UART2_UDRE_vect)
ISR(UART2_UDRE_vect)
#elif defined(UART_UDRE_vect)
ISR(UART_UDRE_vect)
#elif defined(USART2_UDRE_vect)
ISR(USART2_UDRE_vect)
#elif defined(USART_UDRE_vect)
ISR(USART_UDRE_vect)
#else
#error "Don't know what the Data Register Empty vector is called for the first UART"
#endif
{
Serial2._tx_udr_empty_irq();
}
#if defined(UBRRH) && defined(UBRRL)
HardwareSerial Serial2(&UBRRH, &UBRRL, &UCSRA, &UCSRB, &UCSRC, &UDR);
#else
HardwareSerial Serial2(&UBRR2H, &UBRR2L, &UCSR2A, &UCSR2B, &UCSR2C, &UDR2);
#endif
// Function that can be weakly referenced by serialEventRun to prevent
// pulling in this file if it's not otherwise used.
bool Serial2_available() {
return Serial2.available();
}
#endif // HAVE_HWSERIAL2

55
hardware/arduino/avr/cores/arduino/HardwareSerial3.cpp Normal file
View File

@ -0,0 +1,55 @@
#include "Arduino.h"
#include "HardwareSerial.h"
#include "HardwareSerial_private.h"
// Each HardwareSerial is defined in its own file, sine the linker pulls
// in the entire file when any element inside is used. --gc-sections can
// additionally cause unused symbols to be dropped, but ISRs have the
// "used" attribute so are never dropped and they keep the
// HardwareSerial instance in as well. Putting each instance in its own
// file prevents the linker from pulling in any unused instances in the
// first place.
#if defined(HAVE_HWSERIAL3)
#if defined(USART_RX_vect)
ISR(USART_RX_vect)
#elif defined(USART3_RX_vect)
ISR(USART3_RX_vect)
#elif defined(USART_RXC_vect)
ISR(USART_RXC_vect) // ATmega8
#else
#error "Don't know what the Data Received vector is called for the first UART"
#endif
{
Serial3._rx_complete_irq();
}
#if defined(UART3_UDRE_vect)
ISR(UART3_UDRE_vect)
#elif defined(UART_UDRE_vect)
ISR(UART_UDRE_vect)
#elif defined(USART3_UDRE_vect)
ISR(USART3_UDRE_vect)
#elif defined(USART_UDRE_vect)
ISR(USART_UDRE_vect)
#else
#error "Don't know what the Data Register Empty vector is called for the first UART"
#endif
{
Serial3._tx_udr_empty_irq();
}
#if defined(UBRRH) && defined(UBRRL)
HardwareSerial Serial3(&UBRRH, &UBRRL, &UCSRA, &UCSRB, &UCSRC, &UDR);
#else
HardwareSerial Serial3(&UBRR3H, &UBRR3L, &UCSR3A, &UCSR3B, &UCSR3C, &UDR3);
#endif
// Function that can be weakly referenced by serialEventRun to prevent
// pulling in this file if it's not otherwise used.
bool Serial3_available() {
return Serial3.available();
}
#endif // HAVE_HWSERIAL3

95
hardware/arduino/avr/cores/arduino/HardwareSerial_private.h Normal file
View File

@ -0,0 +1,95 @@
#include "wiring_private.h"
// this next line disables the entire HardwareSerial.cpp,
// this is so I can support Attiny series and any other chip without a uart
#if defined(HAVE_HWSERIAL0) || defined(HAVE_HWSERIAL1) || defined(HAVE_HWSERIAL2) || defined(HAVE_HWSERIAL3)
// Ensure that the various bit positions we use are available with a 0
// postfix, so we can always use the values for UART0 for all UARTs. The
// alternative, passing the various values for each UART to the
// HardwareSerial constructor also works, but makes the code bigger and
// slower.
#if !defined(TXC0)
#if defined(TXC)
// On ATmega8, the uart and its bits are not numbered, so there is no TXC0 etc.
#define TXC0 TXC
#define RXEN0 RXEN
#define TXEN0 TXEN
#define RXCIE0 RXCIE
#define UDRIE0 UDRIE
#define U2X0 U2X
#define UPE0 UPE
#define UDRE0 UDRE
#elif defined(TXC1)
// Some devices have uart1 but no uart0
#define TXC0 TXC1
#define RXEN0 RXEN1
#define TXEN0 TXEN1
#define RXCIE0 RXCIE1
#define UDRIE0 UDRIE1
#define U2X0 U2X1
#define UPE0 UPE1
#define UDRE0 UDRE1
#else
#error No UART found in HardwareSerial.cpp
#endif
#endif // !defined TXC0
// Check at compiletime that it is really ok to use the bit positions of
// UART0 for the other UARTs as well, in case these values ever get
// changed for future hardware.
#if defined(TXC1) && (TXC1 != TXC0 || RXEN1 != RXEN0 || RXCIE1 != RXCIE0 || \
UDRIE1 != UDRIE0 || U2X1 != U2X0 || UPE1 != UPE0 || \
UDRE1 != UDRE0)
#error "Not all bit positions for UART1 are the same as for UART0"
#endif
#if defined(TXC2) && (TXC2 != TXC0 || RXEN2 != RXEN0 || RXCIE2 != RXCIE0 || \
UDRIE2 != UDRIE0 || U2X2 != U2X0 || UPE2 != UPE0 || \
UDRE2 != UDRE0)
#error "Not all bit positions for UART2 are the same as for UART0"
#endif
#if defined(TXC3) && (TXC3 != TXC0 || RXEN3 != RXEN0 || RXCIE3 != RXCIE0 || \
UDRIE3 != UDRIE0 || U3X3 != U3X0 || UPE3 != UPE0 || \
UDRE3 != UDRE0)
#error "Not all bit positions for UART3 are the same as for UART0"
#endif
// Constructors ////////////////////////////////////////////////////////////////
HardwareSerial::HardwareSerial(
volatile uint8_t *ubrrh, volatile uint8_t *ubrrl,
volatile uint8_t *ucsra, volatile uint8_t *ucsrb,
volatile uint8_t *ucsrc, volatile uint8_t *udr) :
_ubrrh(ubrrh), _ubrrl(ubrrl),
_ucsra(ucsra), _ucsrb(ucsrb), _ucsrc(ucsrc),
_udr(udr),
_tx_buffer_head(0), _tx_buffer_tail(0),
_rx_buffer_head(0), _rx_buffer_tail(0)
{
}
// Actual interrupt handlers //////////////////////////////////////////////////////////////
void HardwareSerial::_rx_complete_irq(void)
{
if (bit_is_clear(*_ucsra, UPE0)) {
// No Parity error, read byte and store it in the buffer if there is
// room
unsigned char c = *_udr;
int i = (unsigned int)(_rx_buffer_head + 1) % SERIAL_BUFFER_SIZE;
// if we should be storing the received character into the location
// just before the tail (meaning that the head would advance to the
// current location of the tail), we're about to overflow the buffer
// and so we don't write the character or advance the head.
if (i != _rx_buffer_tail) {
_rx_buffer[_rx_buffer_head] = c;
_rx_buffer_head = i;
}
} else {
// Parity error, read byte but discard it
unsigned char c = *_udr;
};
}
#endif // whole file

2
hardware/arduino/avr/cores/arduino/USBAPI.h
View File

@ -55,6 +55,8 @@ public:
};
extern Serial_ Serial;
#define HAVE_CDCSERIAL
//================================================================================
//================================================================================
// Mouse