mirror of
https://github.com/arduino/Arduino.git
synced 2024-11-30 11:24:12 +01:00
Removing wrong file from sam3s-ek variant folder
This commit is contained in:
Thibaut VIARD
parent
01f726a0e1
commit
61c55be1cb
@ -1,31 +0,0 @@
|
||||
#*******************************************************
|
||||
#
|
||||
# Connect to J-Link and debug application in flash.
|
||||
#
|
||||
|
||||
# define 'reset' command
|
||||
define reset
|
||||
|
||||
# Connect to the J-Link gdb server
|
||||
target remote localhost:2331
|
||||
# Reset the chip to get to a known state
|
||||
monitor reset
|
||||
|
||||
# Select flash device
|
||||
monitor flash device = AT91SAM3S4C
|
||||
# Enable flash download and flash breakpoints
|
||||
monitor flash download = 1
|
||||
# Load the program
|
||||
load
|
||||
|
||||
# Reset peripheral (RSTC_CR)
|
||||
set *0x400e1400 = 0xA5000004
|
||||
|
||||
# Initializing PC and stack pointer
|
||||
mon reg sp=(0x400000)
|
||||
set *0x400004 = *0x400004 & 0xFFFFFFFE
|
||||
mon reg pc=(0x400004)
|
||||
info reg
|
||||
|
||||
# end of 'reset' command
|
||||
end
|
||||
@ -1,140 +0,0 @@
|
||||
/* ----------------------------------------------------------------------------
|
||||
* ATMEL Microcontroller Software Support
|
||||
* ----------------------------------------------------------------------------
|
||||
* Copyright (c) 2009, Atmel Corporation
|
||||
*
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* - Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the disclaimer below.
|
||||
*
|
||||
* Atmel's name may not be used to endorse or promote products derived from
|
||||
* this software without specific prior written permission.
|
||||
*
|
||||
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
* ----------------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
/*------------------------------------------------------------------------------
|
||||
* Linker script for running in internal FLASH on the ATSAM3S4
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
|
||||
OUTPUT_ARCH(arm)
|
||||
SEARCH_DIR(.)
|
||||
|
||||
/* Memory Spaces Definitions */
|
||||
MEMORY
|
||||
{
|
||||
rom (rx) : ORIGIN = 0x00400000, LENGTH = 0x00040000 /* flash, 256K */
|
||||
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x0000c000 /* sram, 48K */
|
||||
}
|
||||
|
||||
/* Section Definitions */
|
||||
SECTIONS
|
||||
{
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sfixed = .;
|
||||
KEEP(*(.vectors .vectors.*))
|
||||
*(.text .text.* .gnu.linkonce.t.*)
|
||||
*(.glue_7t) *(.glue_7)
|
||||
*(.rodata .rodata* .gnu.linkonce.r.*)
|
||||
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
||||
|
||||
/* Support C constructors, and C destructors in both user code
|
||||
and the C library. This also provides support for C++ code. */
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.init))
|
||||
. = ALIGN(4);
|
||||
__preinit_array_start = .;
|
||||
KEEP (*(.preinit_array))
|
||||
__preinit_array_end = .;
|
||||
|
||||
. = ALIGN(4);
|
||||
__init_array_start = .;
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array))
|
||||
__init_array_end = .;
|
||||
|
||||
. = ALIGN(0x4);
|
||||
KEEP (*crtbegin.o(.ctors))
|
||||
KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
|
||||
KEEP (*(SORT(.ctors.*)))
|
||||
KEEP (*crtend.o(.ctors))
|
||||
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.fini))
|
||||
|
||||
. = ALIGN(4);
|
||||
__fini_array_start = .;
|
||||
KEEP (*(.fini_array))
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
__fini_array_end = .;
|
||||
|
||||
KEEP (*crtbegin.o(.dtors))
|
||||
KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
|
||||
KEEP (*(SORT(.dtors.*)))
|
||||
KEEP (*crtend.o(.dtors))
|
||||
|
||||
. = ALIGN(4);
|
||||
_efixed = .; /* End of text section */
|
||||
} > rom
|
||||
|
||||
/* .ARM.exidx is sorted, so has to go in its own output section. */
|
||||
PROVIDE_HIDDEN (__exidx_start = .);
|
||||
.ARM.exidx :
|
||||
{
|
||||
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
|
||||
} > rom
|
||||
PROVIDE_HIDDEN (__exidx_end = .);
|
||||
|
||||
. = ALIGN(4);
|
||||
_etext = .;
|
||||
|
||||
.relocate : AT (_etext)
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_srelocate = .;
|
||||
*(.ramfunc .ramfunc.*);
|
||||
*(.data .data.*);
|
||||
. = ALIGN(4);
|
||||
_erelocate = .;
|
||||
} > ram
|
||||
|
||||
/* .bss section which is used for uninitialized data */
|
||||
.bss (NOLOAD) :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sbss = . ;
|
||||
_szero = .;
|
||||
*(.bss .bss.*)
|
||||
*(COMMON)
|
||||
. = ALIGN(4);
|
||||
_ebss = . ;
|
||||
_ezero = .;
|
||||
} > ram
|
||||
|
||||
/* stack section */
|
||||
.stack (NOLOAD):
|
||||
{
|
||||
. = ALIGN(8);
|
||||
*(.stack .stack.*)
|
||||
} > ram
|
||||
|
||||
. = ALIGN(4);
|
||||
_end = . ;
|
||||
}
|
||||
@ -1,27 +0,0 @@
|
||||
#*************************************************
|
||||
#
|
||||
# Connect to J-Link and debug application in sram on SAM3S
|
||||
#
|
||||
# Note:
|
||||
# First, users should modify Step1 and Step2 according to their project,
|
||||
# then do Step3.
|
||||
|
||||
# Step1: Connect to the J-Link gdb server
|
||||
define reset
|
||||
target remote localhost:2331
|
||||
monitor reset
|
||||
|
||||
# Step2: Load file(eg. getting-started project)
|
||||
load
|
||||
|
||||
# Step3: Reset peripheral (RSTC_CR)
|
||||
set *0x400e1400 = 0xA5000004
|
||||
|
||||
# Step4: Initializing PC and stack pointer
|
||||
# Modify pc value to even before writing pc register
|
||||
mon reg sp=(0x20000000)
|
||||
set *0x20000004 = *0x20000004 & 0xFFFFFFFE
|
||||
mon reg pc=(0x20000004)
|
||||
info reg
|
||||
|
||||
end
|
||||
@ -1,140 +0,0 @@
|
||||
/* ----------------------------------------------------------------------------
|
||||
* ATMEL Microcontroller Software Support
|
||||
* ----------------------------------------------------------------------------
|
||||
* Copyright (c) 2009, Atmel Corporation
|
||||
*
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* - Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the disclaimer below.
|
||||
*
|
||||
* Atmel's name may not be used to endorse or promote products derived from
|
||||
* this software without specific prior written permission.
|
||||
*
|
||||
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
* ----------------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
/*------------------------------------------------------------------------------
|
||||
* Linker script for running in internal SRAM on the ATSAM3S4
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
|
||||
OUTPUT_ARCH(arm)
|
||||
SEARCH_DIR(.)
|
||||
|
||||
/* Memory Spaces Definitions */
|
||||
MEMORY
|
||||
{
|
||||
rom (rx) : ORIGIN = 0x00400000, LENGTH = 0x00040000 /* flash, 256K */
|
||||
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x0000c000 /* sram, 48K */
|
||||
}
|
||||
|
||||
/* Section Definitions */
|
||||
SECTIONS
|
||||
{
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sfixed = .;
|
||||
KEEP(*(.vectors .vectors.*))
|
||||
*(.text .text.* .gnu.linkonce.t.*)
|
||||
*(.glue_7t) *(.glue_7)
|
||||
*(.rodata .rodata* .gnu.linkonce.r.*)
|
||||
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
||||
|
||||
/* Support C constructors, and C destructors in both user code
|
||||
and the C library. This also provides support for C++ code. */
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.init))
|
||||
. = ALIGN(4);
|
||||
__preinit_array_start = .;
|
||||
KEEP (*(.preinit_array))
|
||||
__preinit_array_end = .;
|
||||
|
||||
. = ALIGN(4);
|
||||
__init_array_start = .;
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array))
|
||||
__init_array_end = .;
|
||||
|
||||
. = ALIGN(0x4);
|
||||
KEEP (*crtbegin.o(.ctors))
|
||||
KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
|
||||
KEEP (*(SORT(.ctors.*)))
|
||||
KEEP (*crtend.o(.ctors))
|
||||
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.fini))
|
||||
|
||||
. = ALIGN(4);
|
||||
__fini_array_start = .;
|
||||
KEEP (*(.fini_array))
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
__fini_array_end = .;
|
||||
|
||||
KEEP (*crtbegin.o(.dtors))
|
||||
KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
|
||||
KEEP (*(SORT(.dtors.*)))
|
||||
KEEP (*crtend.o(.dtors))
|
||||
|
||||
. = ALIGN(4);
|
||||
_efixed = .; /* End of text section */
|
||||
} > ram
|
||||
|
||||
. = ALIGN(4);
|
||||
_etext = .;
|
||||
|
||||
.relocate : AT (_etext)
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_srelocate = .;
|
||||
*(.ramfunc .ramfunc.*);
|
||||
*(.data .data.*);
|
||||
. = ALIGN(4);
|
||||
_erelocate = .;
|
||||
} > ram
|
||||
|
||||
/* .bss section which is used for uninitialized data */
|
||||
.bss (NOLOAD) :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sbss = . ;
|
||||
_szero = .;
|
||||
*(.bss .bss.*)
|
||||
*(COMMON)
|
||||
. = ALIGN(4);
|
||||
_ebss = . ;
|
||||
_ezero = .;
|
||||
} > ram
|
||||
|
||||
/* stack section */
|
||||
.stack (NOLOAD):
|
||||
{
|
||||
. = ALIGN(8);
|
||||
*(.stack .stack.*)
|
||||
} > ram
|
||||
|
||||
/* .ARM.exidx is sorted, so has to go in its own output section. */
|
||||
PROVIDE_HIDDEN (__exidx_start = .);
|
||||
.ARM.exidx :
|
||||
{
|
||||
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
|
||||
} > ram
|
||||
PROVIDE_HIDDEN (__exidx_end = .);
|
||||
|
||||
. = ALIGN(4);
|
||||
_end = . ;
|
||||
}
|
||||
Loading…
Reference in New Issue
Block a user