Added BarGraph example

build/shared/dist/examples/Display/barGraph/applet/barGraph.cpp

@@ -0,0 +1,56 @@
+
+
+
+// these constants won't change:
+#include "WProgram.h"
+void setup();
+void loop();
+const int analogPin = 0;    // the pin that the potentiometer is attached to
+const int ledCount = 10;    // the number of LEDs in the bar graph
+
+int ledPins[] = { 
+  2, 3, 4, 5, 6, 7,8,9,10,11 };   // an array of pin numbers to which LEDs are attached
+
+
+void setup() {
+  // loop over the pin array and set them all to output:
+  for (int thisLed = 0; thisLed < ledCount; thisLed++) {
+    pinMode(ledPins[thisLed], OUTPUT); 
+  }
+}
+
+void loop() {
+  // read the potentiometer:
+  int sensorReading = analogRead(analogPin);
+  // map the result to a range from 0 to the number of LEDs:
+  int ledLevel = map(sensorReading, 0, 1023, 0, ledCount);
+
+  // loop over the LED array:
+  for (int thisLed = 0; thisLed < ledCount; thisLed++) {
+    // if the array element's index is less than ledLevel,
+    // turn the pin for this element on:
+    if (thisLed < ledLevel) {
+      digitalWrite(ledPins[thisLed], HIGH);
+    } 
+    // turn off all pins higher than the ledLevel:
+    else {
+      digitalWrite(ledPins[thisLed], LOW); 
+    }
+  }
+}
+
+
+
+
+int main(void)
+{
+	init();
+
+	setup();
+    
+	for (;;)
+		loop();
+        
+	return 0;
+}
+

build/shared/dist/examples/Display/barGraph/applet/barGraph.cpp.eep

@@ -0,0 +1 @@
+:00000001FF

build/shared/dist/examples/Display/barGraph/applet/barGraph.cpp.hex

@@ -0,0 +1,87 @@
+:100000000C9461000C947E000C947E000C947E0095
+:100010000C947E000C947E000C947E000C947E0068
+:100020000C947E000C947E000C947E000C947E0058
+:100030000C947E000C947E000C947E000C947E0048
+:100040000C94E9000C947E000C947E000C947E00CD
+:100050000C947E000C947E000C947E000C947E0028
+:100060000C947E000C947E00000000002400270009
+:100070002A0000000000250028002B0000000000DE
+:1000800023002600290004040404040404040202DA
+:100090000202020203030303030301020408102007
+:1000A0004080010204081020010204081020000012
+:1000B0000007000201000003040600000000000029
+:1000C000000011241FBECFEFD4E0DEBFCDBF11E092
+:1000D000A0E0B1E0EAE3F5E002C005900D92A631A0
+:1000E000B107D9F711E0A6E1B1E001C01D92AF312F
+:1000F000B107E1F70E94E2000C949B020C9400000F
+:10010000AF92BF92CF92DF92EF92FF920F931F9325
+:10011000CF93DF9380E00E946B0100D000D0AA272C
+:1001200097FDA095BA2F2AE030E040E050E0EDB70F
+:10013000FEB72183328343835483BC01CD0120E089
+:1001400030E040E050E0EFEFEE2EE3E0FE2E012D38
+:10015000112DAA24BB2465010E94F6017B01C0E099
+:10016000D1E000E010E00F900F900F900F900E156F
+:100170001F051CF4888161E002C0888160E00E9454
+:10018000A9010F5F1F4F22960A30110581F7DF91F9
+:10019000CF911F910F91FF90EF90DF90CF90BF9084
+:1001A000AF900895CF93DF93C0E0D1E0888161E004
+:1001B0000E948901229681E0C431D807B9F7DF9106
+:1001C000CF9108950E9431010E94D2000E948000C8
+:1001D000FDCF1F920F920FB60F9211242F933F93D2
+:1001E0008F939F93AF93BF9380911A0190911B01BE
+:1001F000A0911C01B0911D0130911E010196A11D1D
+:10020000B11D232F2D5F2D3720F02D570196A11DF5
+:10021000B11D20931E0180931A0190931B01A0939E
+:100220001C01B0931D018091160190911701A091BE
+:100230001801B09119010196A11DB11D80931601FD
+:1002400090931701A0931801B0931901BF91AF913A
+:100250009F918F913F912F910F900FBE0F901F9004
+:100260001895789484B5826084BD84B5816084BD1E
+:1002700085B5826085BD85B5816085BDEEE6F0E01F
+:10028000808181608083E1E8F0E08081826080830A
+:10029000808181608083E0E8F0E0808181608083FC
+:1002A000E1EBF0E0808184608083E0EBF0E080812E
+:1002B00081608083EAE7F0E08081846080838081D0
+:1002C0008260808380818160808380818068808378
+:1002D0001092C10008958770909114019295990F22
+:1002E000990F907C982B90937C0080917A00806489
+:1002F00080937A0080917A0086FDFCCF209178006F
+:1003000040917900942F80E030E0282B392BC901EF
+:100310000895282F30E0C90186569F4FFC01949123
+:100320002A573F4FF9018491882391F0E82FF0E09C
+:10033000EE0FFF1FE859FF4FA591B491662329F4F2
+:100340008C91909589238C9308958C91892B8C9313
+:100350000895482F50E0CA0182559F4FFC01249117
+:10036000CA0186569F4FFC0194914A575F4FFA018C
+:1003700034913323D1F1222331F1233021F48091C0
+:1003800080008F7705C0243031F4809180008F7D0C
+:100390008093800018C0213019F484B58F7704C091
+:1003A000223021F484B58F7D84BD0DC0263021F428
+:1003B0008091B0008F7705C0273029F48091B0007C
+:1003C0008F7D8093B000E32FF0E0EE0FFF1FEE581B
+:1003D000FF4FA591B491662329F48C9190958923C0
+:1003E0008C9308958C91892B8C9308952F923F9232
+:1003F0004F925F926F927F928F929F92AF92BF9235
+:10040000CF92DF92EF92FF920F931F93DF93CF93E0
+:10041000CDB7DEB73B014C0119012A016D897E89F8
+:100420008F89988D6A197B098C099D09621A730A54
+:10043000840A950AA40193010E943F02E218F3087E
+:1004400004091509A80197010E945E022A0D3B1DAF
+:100450004C1D5D1DB901CA01CF91DF911F910F9114
+:10046000FF90EF90DF90CF90BF90AF909F908F90D4
+:100470007F906F905F904F903F902F900895629F74
+:10048000D001739FF001829FE00DF11D649FE00D8C
+:10049000F11D929FF00D839FF00D749FF00D659FED
+:1004A000F00D9927729FB00DE11DF91F639FB00DEC
+:1004B000E11DF91FBD01CF011124089597FB092EFD
+:1004C00005260ED057FD04D014D00AD0001C38F4F5
+:1004D00050954095309521953F4F4F4F5F4F089570
+:1004E000F6F790958095709561957F4F8F4F9F4F50
+:1004F0000895A1E21A2EAA1BBB1BFD010DC0AA1F65
+:10050000BB1FEE1FFF1FA217B307E407F50720F07C
+:10051000A21BB30BE40BF50B661F771F881F991FF7
+:100520001A9469F760957095809590959B01AC0140
+:0A053000BD01CF010895F894FFCF3C
+:10053A000200030004000500060007000800090085
+:06054A000A000B00010095
+:00000001FF

build/shared/dist/examples/Display/barGraph/barGraph.pde

@@ -0,0 +1,58 @@
+/*
+  LED bar graph
+ 
+  Turns on a series of LEDs based on the value of an analog sensor.
+  This is a simple way to make a bar graph display. Though this graph
+  uses 10 LEDs, you can use any number by changing the LED count
+  and the pins in the array.
+  
+  This method can be used to control any series of digital outputs that
+  depends on an analog input.
+ 
+  The circuit:
+   * LEDs from pins 2 through 11 to ground
+ 
+ created 26 Jun 2009
+ by Tom Igoe 
+ 
+ http://www.arduino.cc/en/Tutorial/BarGraph
+ */
+
+
+// these constants won't change:
+const int analogPin = 0;    // the pin that the potentiometer is attached to
+const int ledCount = 10;    // the number of LEDs in the bar graph
+
+int ledPins[] = { 
+  2, 3, 4, 5, 6, 7,8,9,10,11 };   // an array of pin numbers to which LEDs are attached
+
+
+void setup() {
+  // loop over the pin array and set them all to output:
+  for (int thisLed = 0; thisLed < ledCount; thisLed++) {
+    pinMode(ledPins[thisLed], OUTPUT); 
+  }
+}
+
+void loop() {
+  // read the potentiometer:
+  int sensorReading = analogRead(analogPin);
+  // map the result to a range from 0 to the number of LEDs:
+  int ledLevel = map(sensorReading, 0, 1023, 0, ledCount);
+
+  // loop over the LED array:
+  for (int thisLed = 0; thisLed < ledCount; thisLed++) {
+    // if the array element's index is less than ledLevel,
+    // turn the pin for this element on:
+    if (thisLed < ledLevel) {
+      digitalWrite(ledPins[thisLed], HIGH);
+    } 
+    // turn off all pins higher than the ledLevel:
+    else {
+      digitalWrite(ledPins[thisLed], LOW); 
+    }
+  }
+}
+
+
+