If you don't " -"save, your changes will be lost." -msgstr "" - -#: Editor.java:2017 Editor.java:2098 Editor.java:2418 Sketch.java:589 -#: Sketch.java:741 Sketch.java:1046 Preferences.java:78 -msgid "Cancel" -msgstr "Odustani" - -#: Editor.java:2017 -msgid "Don't Save" -msgstr "" - -#: Editor.java:2089 -msgid "Bad file selected" -msgstr "" - -#: Editor.java:2090 -msgid "" -"Processing can only open its own sketches\n" -"and other files ending in .ino or .pde" -msgstr "" - -#: Editor.java:2098 Editor.java:2418 Sketch.java:589 Sketch.java:741 -#: Sketch.java:1046 Preferences.java:79 -msgid "OK" -msgstr "" - -#: Editor.java:2100 -#, java-format -msgid "" -"The file \"{0}\" needs to be inside\n" -"a sketch folder named \"{1}\".\n" -"Create this folder, move the file, and continue?" -msgstr "" - -#: Editor.java:2109 -msgid "Moving" -msgstr "" - -#: Editor.java:2120 Editor.java:2131 Editor.java:2141 Editor.java:2159 -#: Sketch.java:479 Sketch.java:485 Sketch.java:500 Sketch.java:507 -#: Sketch.java:530 Sketch.java:547 Base.java:1861 Preferences.java:240 -msgid "Error" -msgstr "Pogreška" - -#: Editor.java:2122 -#, java-format -msgid "A folder named \"{0}\" already exists. Can't open sketch." -msgstr "" - -#: Editor.java:2132 -msgid "Could not create the sketch folder." -msgstr "" - -#: Editor.java:2141 -msgid "Could not copy to a proper location." -msgstr "" - -#: Editor.java:2159 -msgid "Could not create the sketch." -msgstr "" - -#: Editor.java:2166 -#, java-format -msgid "{0} | Arduino {1}" -msgstr "" - -#: Editor.java:2223 Editor.java:2261 -msgid "Saving..." -msgstr "" - -#: Editor.java:2228 Editor.java:2264 -msgid "Done Saving." -msgstr "" - -#: Editor.java:2270 -msgid "Save Canceled." -msgstr "" - -#: Editor.java:2296 -#, java-format -msgid "" -"Serial port {0} not found.\n" -"Retry the upload with another serial port?" -msgstr "" - -#: Editor.java:2331 -msgid "Uploading to I/O Board..." -msgstr "" - -#: Editor.java:2348 Editor.java:2384 -msgid "Done uploading." -msgstr "" - -#: Editor.java:2356 Editor.java:2392 -msgid "Upload canceled." -msgstr "" - -#: Editor.java:2420 -msgid "Save changes before export?" -msgstr "" - -#: Editor.java:2435 -msgid "Export canceled, changes must first be saved." -msgstr "" - -#: Editor.java:2457 -msgid "Burning bootloader to I/O Board (this may take a minute)..." -msgstr "" - -#: Editor.java:2463 -msgid "Done burning bootloader." -msgstr "" - -#: Editor.java:2465 Editor.java:2469 Editor.java:2473 -msgid "Error while burning bootloader." -msgstr "" - -#: Editor.java:2500 -msgid "Printing..." -msgstr "" - -#: Editor.java:2517 -msgid "Done printing." -msgstr "" - -#: Editor.java:2520 -msgid "Error while printing." -msgstr "" - -#: Editor.java:2524 -msgid "Printing canceled." -msgstr "" - -#: Editor.java:2572 -#, java-format -msgid "Bad error line: {0}" -msgstr "" - -#: Editor.java:2641 -msgid "Open URL" -msgstr "" - -#: UpdateCheck.java:53 -msgid "http://www.arduino.cc/latest.txt" -msgstr "" - -#: UpdateCheck.java:103 -msgid "" -"A new version of Arduino is available,\n" -"would you like to visit the Arduino download page?" -msgstr "" - -#: UpdateCheck.java:108 Preferences.java:76 -msgid "Yes" -msgstr "" - -#: UpdateCheck.java:108 Preferences.java:77 -msgid "No" -msgstr "" - -#: UpdateCheck.java:111 -msgid "Update" -msgstr "" - -#: UpdateCheck.java:118 -msgid "http://www.arduino.cc/en/Main/Software" -msgstr "http://www.arduino.cc/en/Main/Software" - -#: FindReplace.java:80 -msgid "Find:" -msgstr "" - -#: FindReplace.java:81 -msgid "Replace with:" -msgstr "" - -#: FindReplace.java:96 -msgid "Ignore Case" -msgstr "" - -#: FindReplace.java:105 -msgid "Wrap Around" -msgstr "" - -#: FindReplace.java:120 FindReplace.java:131 -msgid "Replace All" -msgstr "" - -#: FindReplace.java:121 FindReplace.java:130 Sketch.java:1050 -msgid "Replace" -msgstr "" - -#: FindReplace.java:122 FindReplace.java:129 -msgid "Replace & Find" -msgstr "" - -#: FindReplace.java:123 FindReplace.java:128 -msgid "Previous" -msgstr "" - -#: FindReplace.java:124 FindReplace.java:127 -msgid "Find" -msgstr "" - -#: SerialMonitor.java:93 -msgid "Send" -msgstr "" - -#: SerialMonitor.java:110 -msgid "Autoscroll" -msgstr "" - -#: SerialMonitor.java:112 -msgid "No line ending" -msgstr "" - -#: SerialMonitor.java:112 -msgid "Newline" -msgstr "" - -#: SerialMonitor.java:112 -msgid "Carriage return" -msgstr "" - -#: SerialMonitor.java:112 -msgid "Both NL & CR" -msgstr "" - -#: SerialMonitor.java:130 SerialMonitor.java:133 -msgid " baud" -msgstr "" - -#: Serial.java:147 -#, java-format -msgid "" -"Serial port ''{0}'' already in use. Try quiting any programs that may be " -"using it." -msgstr "" - -#: Serial.java:154 -#, java-format -msgid "Error opening serial port ''{0}''." -msgstr "" - -#: Serial.java:167 -#, java-format -msgid "" -"Serial port ''{0}'' not found. Did you select the right one from the Tools > " -"Serial Port menu?" -msgstr "" - -#: Serial.java:424 -#, java-format -msgid "" -"readBytesUntil() byte buffer is too small for the {0} bytes up to and " -"including char {1}" -msgstr "" - -#: Serial.java:567 -#, java-format -msgid "Error inside Serial.{0}()" -msgstr "" - -#: tools/AutoFormat.java:91 -msgid "Auto Format" -msgstr "" - -#: tools/AutoFormat.java:913 tools/format/src/AutoFormat.java:54 -msgid "No changes necessary for Auto Format." -msgstr "" - -#: tools/AutoFormat.java:919 -msgid "Auto Format Canceled: Too many right parentheses." -msgstr "" - -#: tools/AutoFormat.java:922 -msgid "Auto Format Canceled: Too many left parentheses." -msgstr "" - -#: tools/AutoFormat.java:928 -msgid "Auto Format Canceled: Too many right curly braces." -msgstr "" - -#: tools/AutoFormat.java:931 -msgid "Auto Format Canceled: Too many left curly braces." -msgstr "" - -#: tools/AutoFormat.java:941 -msgid "Auto Format finished." -msgstr "" - -#: tools/FixEncoding.java:41 tools/FixEncoding.java:58 -#: tools/FixEncoding.java:79 -msgid "Fix Encoding & Reload" -msgstr "" - -#: tools/FixEncoding.java:57 -msgid "Discard all changes and reload sketch?" -msgstr "" - -#: tools/FixEncoding.java:77 -msgid "" -"An error occurred while trying to fix the file encoding.\n" -"Do not attempt to save this sketch as it may overwrite\n" -"the old version. Use Open to re-open the sketch and try again.\n" -msgstr "" - -#: tools/Archiver.java:48 -msgid "Archive Sketch" -msgstr "" - -#: tools/Archiver.java:59 -msgid "yyMMdd" -msgstr "yyMMdd" - -#: tools/Archiver.java:74 -msgid "Couldn't archive sketch" -msgstr "" - -#: tools/Archiver.java:75 -msgid "" -"Archiving the sketch has been canceled because\n" -"the sketch couldn't save properly." -msgstr "" - -#: tools/Archiver.java:109 -msgid "Archive sketch as:" -msgstr "" - -#: tools/Archiver.java:139 -msgid "Archive sketch canceled." -msgstr "" - -#: SketchCode.java:83 -#, java-format -msgid "Error while loading code {0}" -msgstr "" - -#: SketchCode.java:258 -#, java-format -msgid "" -"\"{0}\" contains unrecognized characters.If this code was created with an " -"older version of Processing,you may need to use Tools -> Fix Encoding & " -"Reload to updatethe sketch to use UTF-8 encoding. If not, you may need " -"todelete the bad characters to get rid of this warning." -msgstr "" - -#: Sketch.java:278 Sketch.java:307 Sketch.java:581 Sketch.java:970 -msgid "Sketch is Read-Only" -msgstr "" - -#: Sketch.java:279 Sketch.java:308 Sketch.java:582 Sketch.java:971 -msgid "" -"Some files are marked \"read-only\", so you'll\n" -"need to re-save the sketch in another location,\n" -"and try again." -msgstr "" - -#: Sketch.java:286 -msgid "Name for new file:" -msgstr "" - -#: Sketch.java:298 -msgid "Sketch is Untitled" -msgstr "" - -#: Sketch.java:299 -msgid "" -"How about saving the sketch first \n" -"before trying to rename it?" -msgstr "" - -#: Sketch.java:359 Sketch.java:366 Sketch.java:377 -msgid "Problem with rename" -msgstr "" - -#: Sketch.java:360 -msgid "The name cannot start with a period." -msgstr "" - -#: Sketch.java:368 -#, java-format -msgid "\".{0}\" is not a valid extension." -msgstr "" - -#: Sketch.java:378 -msgid "" -"The main file can't use an extension.\n" -"(It may be time for your to graduate to a\n" -"\"real\" programming environment)" -msgstr "" - -#: Sketch.java:400 Sketch.java:414 Sketch.java:423 Sketch.java:863 -msgid "Nope" -msgstr "" - -#: Sketch.java:402 -#, java-format -msgid "A file named \"{0}\" already exists in \"{1}\"" -msgstr "" - -#: Sketch.java:415 -msgid "You can't have a .cpp file with the same name as the sketch." -msgstr "" - -#: Sketch.java:425 -msgid "" -"You can't rename the sketch to \"{0}\"\n" -"because the sketch already has a .cpp file with that name." -msgstr "" - -#: Sketch.java:459 -msgid "Cannot Rename" -msgstr "" - -#: Sketch.java:461 -#, java-format -msgid "Sorry, a sketch (or folder) named \"{0}\" already exists." -msgstr "" - -#: Sketch.java:479 -msgid "Could not rename the sketch. (0)" -msgstr "" - -#: Sketch.java:487 Sketch.java:532 -#, java-format -msgid "Could not rename \"{0}\" to \"{1}\"" -msgstr "" - -#: Sketch.java:500 -msgid "Could not rename the sketch. (1)" -msgstr "" - -#: Sketch.java:507 -msgid "Could not rename the sketch. (2)" -msgstr "" - -#: Sketch.java:544 -msgid "createNewFile() returned false" -msgstr "" - -#: Sketch.java:591 -msgid "Are you sure you want to delete this sketch?" -msgstr "" - -#: Sketch.java:592 -#, java-format -msgid "Are you sure you want to delete \"{0}\"?" -msgstr "" - -#: Sketch.java:595 EditorHeader.java:314 -msgid "Delete" -msgstr "" - -#: Sketch.java:620 -msgid "Couldn't do it" -msgstr "" - -#: Sketch.java:621 -#, java-format -msgid "Could not delete \"{0}\"." -msgstr "" - -#: Sketch.java:651 -msgid "removeCode: internal error.. could not find code" -msgstr "" - -#: Sketch.java:724 -msgid "Sketch is read-only" -msgstr "" - -#: Sketch.java:725 -msgid "" -"Some files are marked \"read-only\", so you'll\n" -"need to re-save this sketch to another location." -msgstr "" - -#: Sketch.java:743 -msgid "" -"In Arduino 1.0, the default file extension has changed\n" -"from .pde to .ino. New sketches (including those created\n" -"by \"Save-As\" will use the new extension. The extension\n" -"of existing sketches will be updated on save, but you can\n" -"disable this in the Preferences dialog.\n" -"\n" -"Save sketch and update its extension?" -msgstr "" - -#: Sketch.java:750 -msgid ".pde -> .ino" -msgstr "" - -#: Sketch.java:829 -msgid "Save sketch folder as..." -msgstr "" - -#: Sketch.java:865 -msgid "" -"You can't save the sketch as \"{0}\"\n" -"because the sketch already has a .cpp file with that name." -msgstr "" - -#: Sketch.java:886 -msgid "How very Borges of you" -msgstr "" - -#: Sketch.java:887 -msgid "" -"You cannot save the sketch into a folder\n" -"inside itself. This would go on forever." -msgstr "" - -#: Sketch.java:979 -msgid "Select an image or other data file to copy to your sketch" -msgstr "" - -#: Sketch.java:1047 -#, java-format -msgid "Replace the existing version of {0}?" -msgstr "" - -#: Sketch.java:1069 Sketch.java:1092 -msgid "Error adding file" -msgstr "" - -#: Sketch.java:1070 -#, java-format -msgid "Could not delete the existing ''{0}'' file." -msgstr "" - -#: Sketch.java:1078 -msgid "You can't fool me" -msgstr "" - -#: Sketch.java:1079 -msgid "" -"This file has already been copied to the\n" -"location from which where you're trying to add it.\n" -"I ain't not doin nuthin'." -msgstr "" - -#: Sketch.java:1093 -#, java-format -msgid "Could not add ''{0}'' to the sketch." -msgstr "" - -#: Sketch.java:1393 Sketch.java:1424 -msgid "Build folder disappeared or could not be written" -msgstr "" - -#: Sketch.java:1408 -msgid "Could not find main class" -msgstr "" - -#: Sketch.java:1433 -#, java-format -msgid "Uncaught exception type: {0}" -msgstr "" - -#: Sketch.java:1465 -#, java-format -msgid "Problem moving {0} to the build folder" -msgstr "" - -#: Sketch.java:1661 -msgid "Uploading..." -msgstr "" - -#: Sketch.java:1684 -#, java-format -msgid "Binary sketch size: {0} bytes (of a {1} byte maximum)" -msgstr "" - -#: Sketch.java:1689 -msgid "Couldn't determine program size: {0}" -msgstr "" - -#: Sketch.java:1694 -msgid "" -"Sketch too big; see http://www.arduino.cc/en/Guide/Troubleshooting#size for " -"tips on reducing it." -msgstr "" - -#: Sketch.java:1754 -msgid "Missing the */ from the end of a /* comment */" -msgstr "" - -#: Sketch.java:1796 -msgid "Sketch Disappeared" -msgstr "" - -#: Sketch.java:1797 -msgid "" -"The sketch folder has disappeared.\n" -" Will attempt to re-save in the same location,\n" -"but anything besides the code will be lost." -msgstr "" - -#: Sketch.java:1810 -msgid "Could not re-save sketch" -msgstr "" - -#: Sketch.java:1811 -msgid "" -"Could not properly re-save the sketch. You may be in trouble at this point,\n" -"and it might be time to copy and paste your code to another text editor." -msgstr "" - -#: Sketch.java:2060 -msgid "" -"The sketch name had to be modified. Sketch names can only consist\n" -"of ASCII characters and numbers (but cannot start with a number).\n" -"They should also be less less than 64 characters long." -msgstr "" - -#: debug/Uploader.java:52 -msgid "https://developer.berlios.de/bugs/?group_id=3590" -msgstr "" - -#: debug/Uploader.java:54 debug/Compiler.java:43 -#, java-format -msgid "Compiler error, please submit this code to {0}" -msgstr "Pogreška u kompiliranju, molim pošaljite kod {0}" - -#: debug/Uploader.java:199 -#, java-format -msgid "" -"the selected serial port {0} does not exist or your board is not connected" -msgstr "" - -#: debug/Uploader.java:203 -msgid "" -"Device is not responding, check the right serial port is selected or RESET " -"the board right before exporting" -msgstr "" - -#: debug/Uploader.java:209 -msgid "" -"Problem uploading to board. See http://www.arduino.cc/en/Guide/" -"Troubleshooting#upload for suggestions." -msgstr "" - -#: debug/Uploader.java:213 -msgid "" -"Wrong microcontroller found. Did you select the right board from the Tools " -"> Board menu?" -msgstr "" - -#: debug/Compiler.java:41 -msgid "http://code.google.com/p/arduino/issues/list" -msgstr "" - -#: debug/Compiler.java:79 -msgid "No board selected; please choose a board from the Tools > Board menu." -msgstr "Nijedna pločica nije izabrana. Molimo izaberite pločicu iz menija Alati > Pločice" - -#: debug/Compiler.java:422 -#, java-format -msgid "{0} returned {1}" -msgstr "" - -#: debug/Compiler.java:426 -msgid "Error compiling." -msgstr "Pogreška u kompiliranju" - -#: debug/Compiler.java:465 -msgid "Please import the SPI library from the Sketch > Import Library menu." -msgstr "Importirajte SPI datoteku iz menija Skeć > Import" - -#: debug/Compiler.java:466 -msgid "" -"\n" -"As of Arduino 0019, the Ethernet library depends on the SPI library.\n" -"You appear to be using it or another library that depends on the SPI " -"library.\n" -"\n" -msgstr "" - -#: debug/Compiler.java:471 -msgid "The 'BYTE' keyword is no longer supported." -msgstr "" - -#: debug/Compiler.java:472 -msgid "" -"\n" -"As of Arduino 1.0, the 'BYTE' keyword is no longer supported.\n" -"Please use Serial.write() instead.\n" -"\n" -msgstr "" - -#: debug/Compiler.java:477 -msgid "The Server class has been renamed EthernetServer." -msgstr "" - -#: debug/Compiler.java:478 -msgid "" -"\n" -"As of Arduino 1.0, the Server class in the Ethernet library has been renamed " -"to EthernetServer.\n" -"\n" -msgstr "" - -#: debug/Compiler.java:483 -msgid "The Client class has been renamed EthernetClient." -msgstr "" - -#: debug/Compiler.java:484 -msgid "" -"\n" -"As of Arduino 1.0, the Client class in the Ethernet library has been renamed " -"to EthernetClient.\n" -"\n" -msgstr "" - -#: debug/Compiler.java:489 -msgid "The Udp class has been renamed EthernetUdp." -msgstr "" - -#: debug/Compiler.java:490 -msgid "" -"\n" -"As of Arduino 1.0, the Udp class in the Ethernet library has been renamed to " -"EthernetClient.\n" -"\n" -msgstr "" - -#: debug/Compiler.java:495 -msgid "Wire.send() has been renamed Wire.write()." -msgstr "" - -#: debug/Compiler.java:496 -msgid "" -"\n" -"As of Arduino 1.0, the Wire.send() function was renamed to Wire.write() for " -"consistency with other libraries.\n" -"\n" -msgstr "" - -#: debug/Compiler.java:501 -msgid "Wire.receive() has been renamed Wire.read()." -msgstr "" - -#: debug/Compiler.java:502 -msgid "" -"\n" -"As of Arduino 1.0, the Wire.receive() function was renamed to Wire.read() " -"for consistency with other libraries.\n" -"\n" -msgstr "" - -#: EditorConsole.java:152 -msgid "Console Error" -msgstr "" - -#: EditorConsole.java:153 -msgid "" -"A problem occurred while trying to open the\n" -"files used to store the console output." -msgstr "" - -#: Base.java:184 -msgid "Non-fatal error while setting the Look & Feel." -msgstr "" - -#: Base.java:185 -msgid "The error message follows, however Arduino should run fine." -msgstr "" - -#: Base.java:220 -msgid "Problem Setting the Platform" -msgstr "" - -#: Base.java:221 -msgid "" -"An unknown error occurred while trying to load\n" -"platform-specific code for your machine." -msgstr "" - -#: Base.java:232 -msgid "Please install JDK 1.5 or later" -msgstr "Instalirajte JDK 1.5 ili noviju verziju" - -#: Base.java:233 -msgid "" -"Arduino requires a full JDK (not just a JRE)\n" -"to run. Please install JDK 1.5 or later.\n" -"More information can be found in the reference." -msgstr "" -"Za upotrebu Arduina je potrebna puna instalacija JDK-a (ne same JRE)\n" -"Instalirajte JDK 1.5 ili noviju verziju.\n" -"Dodatne informacije mozete naci u referenci." - -#: Base.java:257 -msgid "Sketchbook folder disappeared" -msgstr "" - -#: Base.java:258 -msgid "" -"The sketchbook folder no longer exists.\n" -"Arduino will switch to the default sketchbook\n" -"location, and create a new sketchbook folder if\n" -"necessary. Arduino will then stop talking about\n" -"himself in the third person." -msgstr "" - -#: Base.java:532 -msgid "Time for a Break" -msgstr "Vrijeme je za pauzu" - -#: Base.java:533 -msgid "" -"You've reached the limit for auto naming of new sketches\n" -"for the day. How about going for a walk instead?" -msgstr "" -"Dostigli ste današnji limit za automatsko davanje imena novih skećova\n" -"Zašto ne bi otišli u šetnju?" - -#: Base.java:537 -msgid "Sunshine" -msgstr "Sunce" - -#: Base.java:538 -msgid "No really, time for some fresh air for you." -msgstr "Ne, vrijeme je da otiđete na zrak" - -#: Base.java:633 -msgid "Open an Arduino sketch..." -msgstr "Otvori Arduino skeć..." - -#: Base.java:772 -msgid "" -"
Are you " -"sure you want to Quit?Closing the last open sketch will quit Arduino." -msgstr "" -"
Jeste li sigurni da želite odustati?Zatvaranje zadnjeg otvorenog skeća ce zatvoriti Arduino." - -#: Base.java:970 -msgid "Contributed" -msgstr "" - -#: Base.java:1095 -msgid "Sketch Does Not Exist" -msgstr "Skeć ne postoji" - -#: Base.java:1096 -msgid "" -"The selected sketch no longer exists.\n" -"You may need to restart Arduino to update\n" -"the sketchbook menu." -msgstr "" -"Izabrali ste skeć koji više ne postoji.\n" -"Provajte ponovno startati Arduino da bi ste obnovili\n" -"meni" - -#: Base.java:1125 -#, java-format -msgid "" -"The sketch \"{0}\" cannot be used.\n" -"Sketch names must contain only basic letters and numbers\n" -"(ASCII-only with no spaces, and it cannot start with a number).\n" -"To get rid of this message, remove the sketch from\n" -"{1}" -msgstr "" -"Skeć \"{0}\" se ne moze koristiti.\n" -"Ime skeća se smi samo sastojati od obićnih slova i brojeva.\n" -"(samo ASCII bez razmaknica, i ne smi poćeti sa brojem).\n" -"Da bi ste zatvorili ovu poruku, izbrišite skeć iz\n" -"{1}" - -#: Base.java:1132 -msgid "Ignoring sketch with bad name" -msgstr "Skeć sa nevažecem imenom se ignorira" - -#: Base.java:1202 -#, java-format -msgid "" -"The library \"{0}\" cannot be used.\n" -"Library names must contain only basic letters and numbers.\n" -"(ASCII only and no spaces, and it cannot start with a number)" -msgstr "" -"Ime library-a se smi samo sastojati od obićnih slova i brojeva.\n" -"(samo ASCII bez razmaknica, i ne smi poćeti sa brojem).\n" - -#: Base.java:1207 -msgid "Ignoring bad library name" -msgstr "Library sa nevažecem imenom se ignorira" - -#: Base.java:1432 -msgid "Problem getting data folder" -msgstr "" - -#: Base.java:1433 -msgid "Error getting the Arduino data folder." -msgstr "" - -#: Base.java:1440 -msgid "Settings issues" -msgstr "" - -#: Base.java:1441 -msgid "" -"Arduino cannot run because it could not\n" -"create a folder to store your settings." -msgstr "" - -#: Base.java:1602 -msgid "You forgot your sketchbook" -msgstr "Zaboravili ste skeć knižicu" - -#: Base.java:1603 -msgid "" -"Arduino cannot run because it could not\n" -"create a folder to store your sketchbook." -msgstr "" - -#: Base.java:1623 -msgid "Select (or create new) folder for sketches..." -msgstr "Izaberite ili napravite novi direktorij za skećove" - -#: Base.java:1647 -msgid "Problem Opening URL" -msgstr "Problem u otvaranju URL-a" - -#: Base.java:1648 -#, java-format -msgid "" -"Could not open the URL\n" -"{0}" -msgstr "" -"Dostup URL-u nije bio uspješan\n" -"{0}" - -#: Base.java:1671 -msgid "Problem Opening Folder" -msgstr "Problem u otvaranju direktorija" - -#: Base.java:1672 -#, java-format -msgid "" -"Could not open the folder\n" -"{0}" -msgstr "" -"Dostup direktoriju nije bio uspješan\n" -"{0}" - -#: Base.java:1785 -msgid "Guide_MacOSX.html" -msgstr "" - -#: Base.java:1787 -msgid "Guide_Windows.html" -msgstr "" - -#: Base.java:1789 -msgid "http://www.arduino.cc/playground/Learning/Linux" -msgstr "" - -#: Base.java:1794 -msgid "index.html" -msgstr "" - -#: Base.java:1799 -msgid "Guide_Environment.html" -msgstr "" - -#: Base.java:1804 -msgid "environment" -msgstr "okolina" - -#: Base.java:1804 -msgid "platforms.html" -msgstr "" - -#: Base.java:1809 -msgid "Guide_Troubleshooting.html" -msgstr "" - -#: Base.java:1814 -msgid "FAQ.html" -msgstr "" - -#: Base.java:1826 -msgid "Message" -msgstr "Poruka" - -#: Base.java:1842 -msgid "Warning" -msgstr "Upozorenje" - -#: Base.java:2196 -#, java-format -msgid "Could not remove old version of {0}" -msgstr "" - -#: Base.java:2206 -#, java-format -msgid "Could not replace {0}" -msgstr "" - -#: Base.java:2247 Base.java:2270 -#, java-format -msgid "Could not delete {0}" -msgstr "" - -#: EditorHeader.java:292 -msgid "New Tab" -msgstr "" - -#: EditorHeader.java:300 -msgid "Rename" -msgstr "" - -#: EditorHeader.java:326 -msgid "Previous Tab" -msgstr "" - -#: EditorHeader.java:340 -msgid "Next Tab" -msgstr "" - -#: EditorToolbar.java:41 EditorToolbar.java:46 -msgid "Verify" -msgstr "" - -#: EditorToolbar.java:41 -msgid "Open" -msgstr "" - -#: EditorToolbar.java:46 -msgid "New Editor Window" -msgstr "" - -#: EditorToolbar.java:46 -msgid "Open in Another Window" -msgstr "" - -#: Platform.java:167 -msgid "No launcher available" -msgstr "" - -#: Platform.java:168 -msgid "" -"Unspecified platform, no launcher available.\n" -"To enable opening URLs or folders, add a \n" -"\"launcher=/path/to/app\" line to preferences.txt" -msgstr "" - -#: Theme.java:52 -msgid "" -"Could not read color theme settings.\n" -"You'll need to reinstall Processing." -msgstr "" - -#: Preferences.java:80 -msgid "Browse" -msgstr "" - -#: Preferences.java:83 -msgid "System Default" -msgstr "" - -#: Preferences.java:84 -msgid "Arabic" -msgstr "" - -#: Preferences.java:85 -msgid "Aragonese" -msgstr "" - -#: Preferences.java:86 -msgid "Catalan" -msgstr "" - -#: Preferences.java:87 -msgid "Chinese Simplified" -msgstr "" - -#: Preferences.java:88 -msgid "Chinese Traditional" -msgstr "" - -#: Preferences.java:89 -msgid "Danish" -msgstr "" - -#: Preferences.java:90 -msgid "Dutch" -msgstr "" - -#: Preferences.java:91 -msgid "English" -msgstr "" - -#: Preferences.java:92 -msgid "Estonian" -msgstr "" - -#: Preferences.java:93 -msgid "French" -msgstr "" - -#: Preferences.java:94 -msgid "Filipino" -msgstr "" - -#: Preferences.java:95 -msgid "Galician" -msgstr "" - -#: Preferences.java:96 -msgid "German" -msgstr "" - -#: Preferences.java:97 -msgid "Greek" -msgstr "" - -#: Preferences.java:98 -msgid "Hungarian" -msgstr "" - -#: Preferences.java:99 -msgid "Indonesian" -msgstr "" - -#: Preferences.java:100 -msgid "Italian" -msgstr "" - -#: Preferences.java:101 -msgid "Japanese" -msgstr "" - -#: Preferences.java:102 -msgid "Korean" -msgstr "" - -#: Preferences.java:103 -msgid "Latvian" -msgstr "" - -#: Preferences.java:104 -msgid "Lithuaninan" -msgstr "" - -#: Preferences.java:105 -msgid "Persian" -msgstr "" - -#: Preferences.java:106 -msgid "Polish" -msgstr "" - -#: Preferences.java:107 Preferences.java:108 -msgid "Portuguese" -msgstr "" - -#: Preferences.java:109 -msgid "Romanian" -msgstr "" - -#: Preferences.java:110 -msgid "Russian" -msgstr "" - -#: Preferences.java:111 -msgid "Spanish" -msgstr "" - -#: Preferences.java:210 -msgid "" -"Could not read default settings.\n" -"You'll need to reinstall Arduino." -msgstr "" - -#: Preferences.java:242 -#, java-format -msgid "Could not read preferences from {0}" -msgstr "" - -#: Preferences.java:261 -msgid "Error reading preferences" -msgstr "" - -#: Preferences.java:263 -#, java-format -msgid "" -"Error reading the preferences file. Please delete (or move)\n" -"{0} and restart Arduino." -msgstr "" - -#: Preferences.java:299 -msgid "Sketchbook location:" -msgstr "" - -#: Preferences.java:314 -msgid "Select new sketchbook location" -msgstr "" - -#: Preferences.java:337 -msgid "Editor language: " -msgstr "" - -#: Preferences.java:342 Preferences.java:358 -msgid " (requires restart of Arduino)" -msgstr "" - -#: Preferences.java:354 -msgid "Editor font size: " -msgstr "" - -#: Preferences.java:371 -msgid "Show verbose output during: " -msgstr "" - -#: Preferences.java:373 -msgid "compilation " -msgstr "" - -#: Preferences.java:375 -msgid "upload" -msgstr "" - -#: Preferences.java:384 -msgid "Verify code after upload" -msgstr "" - -#: Preferences.java:393 -msgid "Use external editor" -msgstr "" - -#: Preferences.java:403 -msgid "Check for updates on startup" -msgstr "" - -#: Preferences.java:412 -msgid "Update sketch files to new extension on save (.pde -> .ino)" -msgstr "" - -#: Preferences.java:423 -msgid "Automatically associate .ino files with Arduino" -msgstr "" - -#: Preferences.java:433 -msgid "More preferences can be edited directly in the file" -msgstr "" - -#: Preferences.java:462 -msgid "(edit only when Arduino is not running)" -msgstr "" - -#: Preferences.java:609 -#, java-format -msgid "ignoring invalid font size {0}" -msgstr "" diff --git a/app/src/processing/app/Resources_hr.properties b/app/src/processing/app/Resources_hr.properties deleted file mode 100644 index b523c191d..000000000 --- a/app/src/processing/app/Resources_hr.properties +++ /dev/null @@ -1,1034 +0,0 @@ -# Croatian translations for PACKAGE package. -# Copyright (C) 2012 THE PACKAGE'S COPYRIGHT HOLDER -# This file is distributed under the same license as the PACKAGE package. -# Mark Bilandzic <>, 2012. -# -!=Project-Id-Version\: PACKAGE VERSION\nReport-Msgid-Bugs-To\: \nPOT-Creation-Date\: 2012-03-31 06\:03-0400\nPO-Revision-Date\: 2012-03-31 06\:03-0400\nLast-Translator\: Mark Bilandzic <>\nLanguage-Team\: Croatian\nLanguage\: hr\nMIME-Version\: 1.0\nContent-Type\: text/plain; charset\=UTF-8\nContent-Transfer-Encoding\: 8bit\nPlural-Forms\: nplurals\=2; plural\=(n \!\= 1);\n - -#: Editor.java:366 -!No\ files\ were\ added\ to\ the\ sketch.= - -#: Editor.java:369 Sketch.java:996 -!One\ file\ added\ to\ the\ sketch.= - -#: Editor.java:373 -#, java-format -!{0}\ files\ added\ to\ the\ sketch.= - -#: Editor.java:484 -!File= - -#: Editor.java:486 EditorToolbar.java:41 -!New= - -#: Editor.java:494 Base.java:903 -Open...=Otvori... - -#: Editor.java:503 -!Sketchbook= - -#: Editor.java:509 -!Examples= - -#: Editor.java:514 Editor.java:1977 -!Close= - -#: Editor.java:522 Editor.java:2017 Editor.java:2421 EditorToolbar.java:41 -#: EditorToolbar.java:46 -!Save= - -#: Editor.java:530 -!Save\ As...= - -#: Editor.java:538 EditorToolbar.java:41 -!Upload= - -#: Editor.java:546 EditorToolbar.java:46 -!Upload\ Using\ Programmer= - -#: Editor.java:556 -!Page\ Setup= - -#: Editor.java:564 -!Print= - -#: Editor.java:576 Preferences.java:279 -!Preferences= - -#: Editor.java:586 Base.java:782 -Quit=Odustani - -#: Editor.java:600 -!Sketch= - -#: Editor.java:602 -!Verify\ /\ Compile= - -#: Editor.java:629 -!Import\ Library...= - -#: Editor.java:634 -!Show\ Sketch\ Folder= - -#: Editor.java:643 -!Add\ File...= - -#: Editor.java:656 -!Tools= - -#: Editor.java:662 EditorToolbar.java:41 EditorToolbar.java:46 -!Serial\ Monitor= - -#: Editor.java:682 -!Board= - -#: Editor.java:690 -!Serial\ Port= - -#: Editor.java:695 -!Programmer= - -#: Editor.java:699 -!Burn\ Bootloader= - -#: Editor.java:923 -!serialMenu\ is\ null= - -#: Editor.java:927 Editor.java:934 -!name\ is\ null= - -#: Editor.java:986 -!error\ retrieving\ port\ list= - -#: Editor.java:1002 -!Help= - -#: Editor.java:1041 -!Getting\ Started= - -#: Editor.java:1049 -!Environment= - -#: Editor.java:1057 -!Troubleshooting= - -#: Editor.java:1065 -!Reference= - -#: Editor.java:1073 Editor.java:2728 -!Find\ in\ Reference= - -#: Editor.java:1083 -!Frequently\ Asked\ Questions= - -#: Editor.java:1091 -!Visit\ Arduino.cc= - -#: Editor.java:1094 -!http\://arduino.cc/= - -#: Editor.java:1102 -!About\ Arduino= - -#: Editor.java:1116 -!Edit= - -#: Editor.java:1119 Editor.java:1341 -!Undo= - -#: Editor.java:1124 Editor.java:1126 Editor.java:1376 -!Redo= - -#: Editor.java:1135 Editor.java:2652 -!Cut= - -#: Editor.java:1143 Editor.java:2660 -!Copy= - -#: Editor.java:1151 Editor.java:2668 -!Copy\ for\ Forum= - -#: Editor.java:1163 Editor.java:2676 -!Copy\ as\ HTML= - -#: Editor.java:1175 Editor.java:2684 -!Paste= - -#: Editor.java:1184 Editor.java:2692 -!Select\ All= - -#: Editor.java:1194 Editor.java:2702 -!Comment/Uncomment= - -#: Editor.java:1202 Editor.java:2710 -!Increase\ Indent= - -#: Editor.java:1210 Editor.java:2718 -!Decrease\ Indent= - -#: Editor.java:1220 -!Find...= - -#: Editor.java:1235 -!Find\ Next= - -#: Editor.java:1245 -!Find\ Previous= - -#: Editor.java:1255 -!Use\ Selection\ For\ Find= - -#: Editor.java:1816 -!First\ select\ a\ word\ to\ find\ in\ the\ reference.= - -#: Editor.java:1823 -#, java-format -!No\ reference\ available\ for\ "{0}"= - -#: Editor.java:1826 -#, java-format -!{0}.html= - -#: Editor.java:1843 Sketch.java:1647 -!Compiling\ sketch...= - -#: Editor.java:1864 Editor.java:1881 -!Done\ compiling.= - -#: Editor.java:1973 -#, java-format -!Save\ changes\ to\ "{0}"?\ \ = - -#: Editor.java:2006 -!\
\If\ you\ don't\ save,\ your\ changes\ will\ be\ lost.= - -#: Editor.java:2017 Editor.java:2098 Editor.java:2418 Sketch.java:589 -#: Sketch.java:741 Sketch.java:1046 Preferences.java:78 -Cancel=Odustani - -#: Editor.java:2017 -!Don't\ Save= - -#: Editor.java:2089 -!Bad\ file\ selected= - -#: Editor.java:2090 -!Processing\ can\ only\ open\ its\ own\ sketches\nand\ other\ files\ ending\ in\ .ino\ or\ .pde= - -#: Editor.java:2098 Editor.java:2418 Sketch.java:589 Sketch.java:741 -#: Sketch.java:1046 Preferences.java:79 -!OK= - -#: Editor.java:2100 -#, java-format -!The\ file\ "{0}"\ needs\ to\ be\ inside\na\ sketch\ folder\ named\ "{1}".\nCreate\ this\ folder,\ move\ the\ file,\ and\ continue?= - -#: Editor.java:2109 -!Moving= - -#: Editor.java:2120 Editor.java:2131 Editor.java:2141 Editor.java:2159 -#: Sketch.java:479 Sketch.java:485 Sketch.java:500 Sketch.java:507 -#: Sketch.java:530 Sketch.java:547 Base.java:1861 Preferences.java:240 -Error=Pogre\u0161ka - -#: Editor.java:2122 -#, java-format -!A\ folder\ named\ "{0}"\ already\ exists.\ Can't\ open\ sketch.= - -#: Editor.java:2132 -!Could\ not\ create\ the\ sketch\ folder.= - -#: Editor.java:2141 -!Could\ not\ copy\ to\ a\ proper\ location.= - -#: Editor.java:2159 -!Could\ not\ create\ the\ sketch.= - -#: Editor.java:2166 -#, java-format -!{0}\ |\ Arduino\ {1}= - -#: Editor.java:2223 Editor.java:2261 -!Saving...= - -#: Editor.java:2228 Editor.java:2264 -!Done\ Saving.= - -#: Editor.java:2270 -!Save\ Canceled.= - -#: Editor.java:2296 -#, java-format -!Serial\ port\ {0}\ not\ found.\nRetry\ the\ upload\ with\ another\ serial\ port?= - -#: Editor.java:2331 -!Uploading\ to\ I/O\ Board...= - -#: Editor.java:2348 Editor.java:2384 -!Done\ uploading.= - -#: Editor.java:2356 Editor.java:2392 -!Upload\ canceled.= - -#: Editor.java:2420 -!Save\ changes\ before\ export?= - -#: Editor.java:2435 -!Export\ canceled,\ changes\ must\ first\ be\ saved.= - -#: Editor.java:2457 -!Burning\ bootloader\ to\ I/O\ Board\ (this\ may\ take\ a\ minute)...= - -#: Editor.java:2463 -!Done\ burning\ bootloader.= - -#: Editor.java:2465 Editor.java:2469 Editor.java:2473 -!Error\ while\ burning\ bootloader.= - -#: Editor.java:2500 -!Printing...= - -#: Editor.java:2517 -!Done\ printing.= - -#: Editor.java:2520 -!Error\ while\ printing.= - -#: Editor.java:2524 -!Printing\ canceled.= - -#: Editor.java:2572 -#, java-format -!Bad\ error\ line\:\ {0}= - -#: Editor.java:2641 -!Open\ URL= - -#: UpdateCheck.java:53 -!http\://www.arduino.cc/latest.txt= - -#: UpdateCheck.java:103 -!A\ new\ version\ of\ Arduino\ is\ available,\nwould\ you\ like\ to\ visit\ the\ Arduino\ download\ page?= - -#: UpdateCheck.java:108 Preferences.java:76 -!Yes= - -#: UpdateCheck.java:108 Preferences.java:77 -!No= - -#: UpdateCheck.java:111 -!Update= - -#: UpdateCheck.java:118 -http\://www.arduino.cc/en/Main/Software=http\://www.arduino.cc/en/Main/Software - -#: FindReplace.java:80 -!Find\:= - -#: FindReplace.java:81 -!Replace\ with\:= - -#: FindReplace.java:96 -!Ignore\ Case= - -#: FindReplace.java:105 -!Wrap\ Around= - -#: FindReplace.java:120 FindReplace.java:131 -!Replace\ All= - -#: FindReplace.java:121 FindReplace.java:130 Sketch.java:1050 -!Replace= - -#: FindReplace.java:122 FindReplace.java:129 -!Replace\ &\ Find= - -#: FindReplace.java:123 FindReplace.java:128 -!Previous= - -#: FindReplace.java:124 FindReplace.java:127 -!Find= - -#: SerialMonitor.java:93 -!Send= - -#: SerialMonitor.java:110 -!Autoscroll= - -#: SerialMonitor.java:112 -!No\ line\ ending= - -#: SerialMonitor.java:112 -!Newline= - -#: SerialMonitor.java:112 -!Carriage\ return= - -#: SerialMonitor.java:112 -!Both\ NL\ &\ CR= - -#: SerialMonitor.java:130 SerialMonitor.java:133 -!\ baud= - -#: Serial.java:147 -#, java-format -!Serial\ port\ ''{0}''\ already\ in\ use.\ Try\ quiting\ any\ programs\ that\ may\ be\ using\ it.= - -#: Serial.java:154 -#, java-format -!Error\ opening\ serial\ port\ ''{0}''.= - -#: Serial.java:167 -#, java-format -!Serial\ port\ ''{0}''\ not\ found.\ Did\ you\ select\ the\ right\ one\ from\ the\ Tools\ >\ Serial\ Port\ menu?= - -#: Serial.java:424 -#, java-format -!readBytesUntil()\ byte\ buffer\ is\ too\ small\ for\ the\ {0}\ bytes\ up\ to\ and\ including\ char\ {1}= - -#: Serial.java:567 -#, java-format -!Error\ inside\ Serial.{0}()= - -#: tools/AutoFormat.java:91 -!Auto\ Format= - -#: tools/AutoFormat.java:913 tools/format/src/AutoFormat.java:54 -!No\ changes\ necessary\ for\ Auto\ Format.= - -#: tools/AutoFormat.java:919 -!Auto\ Format\ Canceled\:\ Too\ many\ right\ parentheses.= - -#: tools/AutoFormat.java:922 -!Auto\ Format\ Canceled\:\ Too\ many\ left\ parentheses.= - -#: tools/AutoFormat.java:928 -!Auto\ Format\ Canceled\:\ Too\ many\ right\ curly\ braces.= - -#: tools/AutoFormat.java:931 -!Auto\ Format\ Canceled\:\ Too\ many\ left\ curly\ braces.= - -#: tools/AutoFormat.java:941 -!Auto\ Format\ finished.= - -#: tools/FixEncoding.java:41 tools/FixEncoding.java:58 -#: tools/FixEncoding.java:79 -!Fix\ Encoding\ &\ Reload= - -#: tools/FixEncoding.java:57 -!Discard\ all\ changes\ and\ reload\ sketch?= - -#: tools/FixEncoding.java:77 -!An\ error\ occurred\ while\ trying\ to\ fix\ the\ file\ encoding.\nDo\ not\ attempt\ to\ save\ this\ sketch\ as\ it\ may\ overwrite\nthe\ old\ version.\ Use\ Open\ to\ re-open\ the\ sketch\ and\ try\ again.\n= - -#: tools/Archiver.java:48 -!Archive\ Sketch= - -#: tools/Archiver.java:59 -yyMMdd=yyMMdd - -#: tools/Archiver.java:74 -!Couldn't\ archive\ sketch= - -#: tools/Archiver.java:75 -!Archiving\ the\ sketch\ has\ been\ canceled\ because\nthe\ sketch\ couldn't\ save\ properly.= - -#: tools/Archiver.java:109 -!Archive\ sketch\ as\:= - -#: tools/Archiver.java:139 -!Archive\ sketch\ canceled.= - -#: SketchCode.java:83 -#, java-format -!Error\ while\ loading\ code\ {0}= - -#: SketchCode.java:258 -#, java-format -!"{0}"\ contains\ unrecognized\ characters.If\ this\ code\ was\ created\ with\ an\ older\ version\ of\ Processing,you\ may\ need\ to\ use\ Tools\ ->\ Fix\ Encoding\ &\ Reload\ to\ updatethe\ sketch\ to\ use\ UTF-8\ encoding.\ If\ not,\ you\ may\ need\ todelete\ the\ bad\ characters\ to\ get\ rid\ of\ this\ warning.= - -#: Sketch.java:278 Sketch.java:307 Sketch.java:581 Sketch.java:970 -!Sketch\ is\ Read-Only= - -#: Sketch.java:279 Sketch.java:308 Sketch.java:582 Sketch.java:971 -!Some\ files\ are\ marked\ "read-only",\ so\ you'll\nneed\ to\ re-save\ the\ sketch\ in\ another\ location,\nand\ try\ again.= - -#: Sketch.java:286 -!Name\ for\ new\ file\:= - -#: Sketch.java:298 -!Sketch\ is\ Untitled= - -#: Sketch.java:299 -!How\ about\ saving\ the\ sketch\ first\ \nbefore\ trying\ to\ rename\ it?= - -#: Sketch.java:359 Sketch.java:366 Sketch.java:377 -!Problem\ with\ rename= - -#: Sketch.java:360 -!The\ name\ cannot\ start\ with\ a\ period.= - -#: Sketch.java:368 -#, java-format -!".{0}"\ is\ not\ a\ valid\ extension.= - -#: Sketch.java:378 -!The\ main\ file\ can't\ use\ an\ extension.\n(It\ may\ be\ time\ for\ your\ to\ graduate\ to\ a\n"real"\ programming\ environment)= - -#: Sketch.java:400 Sketch.java:414 Sketch.java:423 Sketch.java:863 -!Nope= - -#: Sketch.java:402 -#, java-format -!A\ file\ named\ "{0}"\ already\ exists\ in\ "{1}"= - -#: Sketch.java:415 -!You\ can't\ have\ a\ .cpp\ file\ with\ the\ same\ name\ as\ the\ sketch.= - -#: Sketch.java:425 -!You\ can't\ rename\ the\ sketch\ to\ "{0}"\nbecause\ the\ sketch\ already\ has\ a\ .cpp\ file\ with\ that\ name.= - -#: Sketch.java:459 -!Cannot\ Rename= - -#: Sketch.java:461 -#, java-format -!Sorry,\ a\ sketch\ (or\ folder)\ named\ "{0}"\ already\ exists.= - -#: Sketch.java:479 -!Could\ not\ rename\ the\ sketch.\ (0)= - -#: Sketch.java:487 Sketch.java:532 -#, java-format -!Could\ not\ rename\ "{0}"\ to\ "{1}"= - -#: Sketch.java:500 -!Could\ not\ rename\ the\ sketch.\ (1)= - -#: Sketch.java:507 -!Could\ not\ rename\ the\ sketch.\ (2)= - -#: Sketch.java:544 -!createNewFile()\ returned\ false= - -#: Sketch.java:591 -!Are\ you\ sure\ you\ want\ to\ delete\ this\ sketch?= - -#: Sketch.java:592 -#, java-format -!Are\ you\ sure\ you\ want\ to\ delete\ "{0}"?= - -#: Sketch.java:595 EditorHeader.java:314 -!Delete= - -#: Sketch.java:620 -!Couldn't\ do\ it= - -#: Sketch.java:621 -#, java-format -!Could\ not\ delete\ "{0}".= - -#: Sketch.java:651 -!removeCode\:\ internal\ error..\ could\ not\ find\ code= - -#: Sketch.java:724 -!Sketch\ is\ read-only= - -#: Sketch.java:725 -!Some\ files\ are\ marked\ "read-only",\ so\ you'll\nneed\ to\ re-save\ this\ sketch\ to\ another\ location.= - -#: Sketch.java:743 -!In\ Arduino\ 1.0,\ the\ default\ file\ extension\ has\ changed\nfrom\ .pde\ to\ .ino.\ \ New\ sketches\ (including\ those\ created\nby\ "Save-As"\ will\ use\ the\ new\ extension.\ \ The\ extension\nof\ existing\ sketches\ will\ be\ updated\ on\ save,\ but\ you\ can\ndisable\ this\ in\ the\ Preferences\ dialog.\n\nSave\ sketch\ and\ update\ its\ extension?= - -#: Sketch.java:750 -!.pde\ ->\ .ino= - -#: Sketch.java:829 -!Save\ sketch\ folder\ as...= - -#: Sketch.java:865 -!You\ can't\ save\ the\ sketch\ as\ "{0}"\nbecause\ the\ sketch\ already\ has\ a\ .cpp\ file\ with\ that\ name.= - -#: Sketch.java:886 -!How\ very\ Borges\ of\ you= - -#: Sketch.java:887 -!You\ cannot\ save\ the\ sketch\ into\ a\ folder\ninside\ itself.\ This\ would\ go\ on\ forever.= - -#: Sketch.java:979 -!Select\ an\ image\ or\ other\ data\ file\ to\ copy\ to\ your\ sketch= - -#: Sketch.java:1047 -#, java-format -!Replace\ the\ existing\ version\ of\ {0}?= - -#: Sketch.java:1069 Sketch.java:1092 -!Error\ adding\ file= - -#: Sketch.java:1070 -#, java-format -!Could\ not\ delete\ the\ existing\ ''{0}''\ file.= - -#: Sketch.java:1078 -!You\ can't\ fool\ me= - -#: Sketch.java:1079 -!This\ file\ has\ already\ been\ copied\ to\ the\nlocation\ from\ which\ where\ you're\ trying\ to\ add\ it.\nI\ ain't\ not\ doin\ nuthin'.= - -#: Sketch.java:1093 -#, java-format -!Could\ not\ add\ ''{0}''\ to\ the\ sketch.= - -#: Sketch.java:1393 Sketch.java:1424 -!Build\ folder\ disappeared\ or\ could\ not\ be\ written= - -#: Sketch.java:1408 -!Could\ not\ find\ main\ class= - -#: Sketch.java:1433 -#, java-format -!Uncaught\ exception\ type\:\ {0}= - -#: Sketch.java:1465 -#, java-format -!Problem\ moving\ {0}\ to\ the\ build\ folder= - -#: Sketch.java:1661 -!Uploading...= - -#: Sketch.java:1684 -#, java-format -!Binary\ sketch\ size\:\ {0}\ bytes\ (of\ a\ {1}\ byte\ maximum)= - -#: Sketch.java:1689 -!Couldn't\ determine\ program\ size\:\ {0}= - -#: Sketch.java:1694 -!Sketch\ too\ big;\ see\ http\://www.arduino.cc/en/Guide/Troubleshooting\#size\ for\ tips\ on\ reducing\ it.= - -#: Sketch.java:1754 -!Missing\ the\ */\ from\ the\ end\ of\ a\ /*\ comment\ */= - -#: Sketch.java:1796 -!Sketch\ Disappeared= - -#: Sketch.java:1797 -!The\ sketch\ folder\ has\ disappeared.\n\ Will\ attempt\ to\ re-save\ in\ the\ same\ location,\nbut\ anything\ besides\ the\ code\ will\ be\ lost.= - -#: Sketch.java:1810 -!Could\ not\ re-save\ sketch= - -#: Sketch.java:1811 -!Could\ not\ properly\ re-save\ the\ sketch.\ You\ may\ be\ in\ trouble\ at\ this\ point,\nand\ it\ might\ be\ time\ to\ copy\ and\ paste\ your\ code\ to\ another\ text\ editor.= - -#: Sketch.java:2060 -!The\ sketch\ name\ had\ to\ be\ modified.\ Sketch\ names\ can\ only\ consist\nof\ ASCII\ characters\ and\ numbers\ (but\ cannot\ start\ with\ a\ number).\nThey\ should\ also\ be\ less\ less\ than\ 64\ characters\ long.= - -#: debug/Uploader.java:52 -!https\://developer.berlios.de/bugs/?group_id\=3590= - -#: debug/Uploader.java:54 debug/Compiler.java:43 -#, java-format -Compiler\ error,\ please\ submit\ this\ code\ to\ {0}=Pogre\u0161ka u kompiliranju, molim po\u0161aljite kod {0} - -#: debug/Uploader.java:199 -#, java-format -!the\ selected\ serial\ port\ {0}\ does\ not\ exist\ or\ your\ board\ is\ not\ connected= - -#: debug/Uploader.java:203 -!Device\ is\ not\ responding,\ check\ the\ right\ serial\ port\ is\ selected\ or\ RESET\ the\ board\ right\ before\ exporting= - -#: debug/Uploader.java:209 -!Problem\ uploading\ to\ board.\ \ See\ http\://www.arduino.cc/en/Guide/Troubleshooting\#upload\ for\ suggestions.= - -#: debug/Uploader.java:213 -!Wrong\ microcontroller\ found.\ \ Did\ you\ select\ the\ right\ board\ from\ the\ Tools\ >\ Board\ menu?= - -#: debug/Compiler.java:41 -!http\://code.google.com/p/arduino/issues/list= - -#: debug/Compiler.java:79 -No\ board\ selected;\ please\ choose\ a\ board\ from\ the\ Tools\ >\ Board\ menu.=Nijedna plo\u010dica nije izabrana. Molimo izaberite plo\u010dicu iz menija Alati > Plo\u010dice - -#: debug/Compiler.java:422 -#, java-format -!{0}\ returned\ {1}= - -#: debug/Compiler.java:426 -Error\ compiling.=Pogre\u0161ka u kompiliranju - -#: debug/Compiler.java:465 -Please\ import\ the\ SPI\ library\ from\ the\ Sketch\ >\ Import\ Library\ menu.=Importirajte SPI datoteku iz menija Ske\u0107 > Import - -#: debug/Compiler.java:466 -!\nAs\ of\ Arduino\ 0019,\ the\ Ethernet\ library\ depends\ on\ the\ SPI\ library.\nYou\ appear\ to\ be\ using\ it\ or\ another\ library\ that\ depends\ on\ the\ SPI\ library.\n\n= - -#: debug/Compiler.java:471 -!The\ 'BYTE'\ keyword\ is\ no\ longer\ supported.= - -#: debug/Compiler.java:472 -!\nAs\ of\ Arduino\ 1.0,\ the\ 'BYTE'\ keyword\ is\ no\ longer\ supported.\nPlease\ use\ Serial.write()\ instead.\n\n= - -#: debug/Compiler.java:477 -!The\ Server\ class\ has\ been\ renamed\ EthernetServer.= - -#: debug/Compiler.java:478 -!\nAs\ of\ Arduino\ 1.0,\ the\ Server\ class\ in\ the\ Ethernet\ library\ has\ been\ renamed\ to\ EthernetServer.\n\n= - -#: debug/Compiler.java:483 -!The\ Client\ class\ has\ been\ renamed\ EthernetClient.= - -#: debug/Compiler.java:484 -!\nAs\ of\ Arduino\ 1.0,\ the\ Client\ class\ in\ the\ Ethernet\ library\ has\ been\ renamed\ to\ EthernetClient.\n\n= - -#: debug/Compiler.java:489 -!The\ Udp\ class\ has\ been\ renamed\ EthernetUdp.= - -#: debug/Compiler.java:490 -!\nAs\ of\ Arduino\ 1.0,\ the\ Udp\ class\ in\ the\ Ethernet\ library\ has\ been\ renamed\ to\ EthernetClient.\n\n= - -#: debug/Compiler.java:495 -!Wire.send()\ has\ been\ renamed\ Wire.write().= - -#: debug/Compiler.java:496 -!\nAs\ of\ Arduino\ 1.0,\ the\ Wire.send()\ function\ was\ renamed\ to\ Wire.write()\ for\ consistency\ with\ other\ libraries.\n\n= - -#: debug/Compiler.java:501 -!Wire.receive()\ has\ been\ renamed\ Wire.read().= - -#: debug/Compiler.java:502 -!\nAs\ of\ Arduino\ 1.0,\ the\ Wire.receive()\ function\ was\ renamed\ to\ Wire.read()\ for\ consistency\ with\ other\ libraries.\n\n= - -#: EditorConsole.java:152 -!Console\ Error= - -#: EditorConsole.java:153 -!A\ problem\ occurred\ while\ trying\ to\ open\ the\nfiles\ used\ to\ store\ the\ console\ output.= - -#: Base.java:184 -!Non-fatal\ error\ while\ setting\ the\ Look\ &\ Feel.= - -#: Base.java:185 -!The\ error\ message\ follows,\ however\ Arduino\ should\ run\ fine.= - -#: Base.java:220 -!Problem\ Setting\ the\ Platform= - -#: Base.java:221 -!An\ unknown\ error\ occurred\ while\ trying\ to\ load\nplatform-specific\ code\ for\ your\ machine.= - -#: Base.java:232 -Please\ install\ JDK\ 1.5\ or\ later=Instalirajte JDK 1.5 ili noviju verziju - -#: Base.java:233 -Arduino\ requires\ a\ full\ JDK\ (not\ just\ a\ JRE)\nto\ run.\ Please\ install\ JDK\ 1.5\ or\ later.\nMore\ information\ can\ be\ found\ in\ the\ reference.=Za upotrebu Arduina je potrebna puna instalacija JDK-a (ne same JRE)\nInstalirajte JDK 1.5 ili noviju verziju.\nDodatne informacije mozete naci u referenci. - -#: Base.java:257 -!Sketchbook\ folder\ disappeared= - -#: Base.java:258 -!The\ sketchbook\ folder\ no\ longer\ exists.\nArduino\ will\ switch\ to\ the\ default\ sketchbook\nlocation,\ and\ create\ a\ new\ sketchbook\ folder\ if\nnecessary.\ Arduino\ will\ then\ stop\ talking\ about\nhimself\ in\ the\ third\ person.= - -#: Base.java:532 -Time\ for\ a\ Break=Vrijeme je za pauzu - -#: Base.java:533 -You've\ reached\ the\ limit\ for\ auto\ naming\ of\ new\ sketches\nfor\ the\ day.\ How\ about\ going\ for\ a\ walk\ instead?=Dostigli ste dana\u0161nji limit za automatsko davanje imena novih ske\u0107ova\nZa\u0161to ne bi oti\u0161li u \u0161etnju? - -#: Base.java:537 -Sunshine=Sunce - -#: Base.java:538 -No\ really,\ time\ for\ some\ fresh\ air\ for\ you.=Ne, vrijeme je da oti\u0111ete na zrak - -#: Base.java:633 -Open\ an\ Arduino\ sketch...=Otvori Arduino ske\u0107... - -#: Base.java:772 -\
\Closing\ the\ last\ open\ sketch\ will\ quit\ Arduino.=
Jeste li sigurni da \u017eelite odustati?Zatvaranje zadnjeg otvorenog ske\u0107a ce zatvoriti Arduino. - -#: Base.java:970 -!Contributed= - -#: Base.java:1095 -Sketch\ Does\ Not\ Exist=Ske\u0107 ne postoji - -#: Base.java:1096 -The\ selected\ sketch\ no\ longer\ exists.\nYou\ may\ need\ to\ restart\ Arduino\ to\ update\nthe\ sketchbook\ menu.=Izabrali ste ske\u0107 koji vi\u0161e ne postoji.\nProvajte ponovno startati Arduino da bi ste obnovili\nmeni - -#: Base.java:1125 -#, java-format -The\ sketch\ "{0}"\ cannot\ be\ used.\nSketch\ names\ must\ contain\ only\ basic\ letters\ and\ numbers\n(ASCII-only\ with\ no\ spaces,\ and\ it\ cannot\ start\ with\ a\ number).\nTo\ get\ rid\ of\ this\ message,\ remove\ the\ sketch\ from\n{1}=Ske\u0107 "{0}" se ne moze koristiti.\nIme ske\u0107a se smi samo sastojati od obi\u0107nih slova i brojeva.\n(samo ASCII bez razmaknica, i ne smi po\u0107eti sa brojem).\nDa bi ste zatvorili ovu poruku, izbri\u0161ite ske\u0107 iz\n{1} - -#: Base.java:1132 -Ignoring\ sketch\ with\ bad\ name=Ske\u0107 sa neva\u017eecem imenom se ignorira - -#: Base.java:1202 -#, java-format -The\ library\ "{0}"\ cannot\ be\ used.\nLibrary\ names\ must\ contain\ only\ basic\ letters\ and\ numbers.\n(ASCII\ only\ and\ no\ spaces,\ and\ it\ cannot\ start\ with\ a\ number)=Ime library-a se smi samo sastojati od obi\u0107nih slova i brojeva.\n(samo ASCII bez razmaknica, i ne smi po\u0107eti sa brojem).\n - -#: Base.java:1207 -Ignoring\ bad\ library\ name=Library sa neva\u017eecem imenom se ignorira - -#: Base.java:1432 -!Problem\ getting\ data\ folder= - -#: Base.java:1433 -!Error\ getting\ the\ Arduino\ data\ folder.= - -#: Base.java:1440 -!Settings\ issues= - -#: Base.java:1441 -!Arduino\ cannot\ run\ because\ it\ could\ not\ncreate\ a\ folder\ to\ store\ your\ settings.= - -#: Base.java:1602 -You\ forgot\ your\ sketchbook=Zaboravili ste ske\u0107 kni\u017eicu - -#: Base.java:1603 -!Arduino\ cannot\ run\ because\ it\ could\ not\ncreate\ a\ folder\ to\ store\ your\ sketchbook.= - -#: Base.java:1623 -Select\ (or\ create\ new)\ folder\ for\ sketches...=Izaberite ili napravite novi direktorij za ske\u0107ove - -#: Base.java:1647 -Problem\ Opening\ URL=Problem u otvaranju URL-a - -#: Base.java:1648 -#, java-format -Could\ not\ open\ the\ URL\n{0}=Dostup URL-u nije bio uspje\u0161an\n{0} - -#: Base.java:1671 -Problem\ Opening\ Folder=Problem u otvaranju direktorija - -#: Base.java:1672 -#, java-format -Could\ not\ open\ the\ folder\n{0}=Dostup direktoriju nije bio uspje\u0161an\n{0} - -#: Base.java:1785 -!Guide_MacOSX.html= - -#: Base.java:1787 -!Guide_Windows.html= - -#: Base.java:1789 -!http\://www.arduino.cc/playground/Learning/Linux= - -#: Base.java:1794 -!index.html= - -#: Base.java:1799 -!Guide_Environment.html= - -#: Base.java:1804 -environment=okolina - -#: Base.java:1804 -!platforms.html= - -#: Base.java:1809 -!Guide_Troubleshooting.html= - -#: Base.java:1814 -!FAQ.html= - -#: Base.java:1826 -Message=Poruka - -#: Base.java:1842 -Warning=Upozorenje - -#: Base.java:2196 -#, java-format -!Could\ not\ remove\ old\ version\ of\ {0}= - -#: Base.java:2206 -#, java-format -!Could\ not\ replace\ {0}= - -#: Base.java:2247 Base.java:2270 -#, java-format -!Could\ not\ delete\ {0}= - -#: EditorHeader.java:292 -!New\ Tab= - -#: EditorHeader.java:300 -!Rename= - -#: EditorHeader.java:326 -!Previous\ Tab= - -#: EditorHeader.java:340 -!Next\ Tab= - -#: EditorToolbar.java:41 EditorToolbar.java:46 -!Verify= - -#: EditorToolbar.java:41 -!Open= - -#: EditorToolbar.java:46 -!New\ Editor\ Window= - -#: EditorToolbar.java:46 -!Open\ in\ Another\ Window= - -#: Platform.java:167 -!No\ launcher\ available= - -#: Platform.java:168 -!Unspecified\ platform,\ no\ launcher\ available.\nTo\ enable\ opening\ URLs\ or\ folders,\ add\ a\ \n"launcher\=/path/to/app"\ line\ to\ preferences.txt= - -#: Theme.java:52 -!Could\ not\ read\ color\ theme\ settings.\nYou'll\ need\ to\ reinstall\ Processing.= - -#: Preferences.java:80 -!Browse= - -#: Preferences.java:83 -!System\ Default= - -#: Preferences.java:84 -!Arabic= - -#: Preferences.java:85 -!Aragonese= - -#: Preferences.java:86 -!Catalan= - -#: Preferences.java:87 -!Chinese\ Simplified= - -#: Preferences.java:88 -!Chinese\ Traditional= - -#: Preferences.java:89 -!Danish= - -#: Preferences.java:90 -!Dutch= - -#: Preferences.java:91 -!English= - -#: Preferences.java:92 -!Estonian= - -#: Preferences.java:93 -!French= - -#: Preferences.java:94 -!Filipino= - -#: Preferences.java:95 -!Galician= - -#: Preferences.java:96 -!German= - -#: Preferences.java:97 -!Greek= - -#: Preferences.java:98 -!Hungarian= - -#: Preferences.java:99 -!Indonesian= - -#: Preferences.java:100 -!Italian= - -#: Preferences.java:101 -!Japanese= - -#: Preferences.java:102 -!Korean= - -#: Preferences.java:103 -!Latvian= - -#: Preferences.java:104 -!Lithuaninan= - -#: Preferences.java:105 -!Persian= - -#: Preferences.java:106 -!Polish= - -#: Preferences.java:107 Preferences.java:108 -!Portuguese= - -#: Preferences.java:109 -!Romanian= - -#: Preferences.java:110 -!Russian= - -#: Preferences.java:111 -!Spanish= - -#: Preferences.java:210 -!Could\ not\ read\ default\ settings.\nYou'll\ need\ to\ reinstall\ Arduino.= - -#: Preferences.java:242 -#, java-format -!Could\ not\ read\ preferences\ from\ {0}= - -#: Preferences.java:261 -!Error\ reading\ preferences= - -#: Preferences.java:263 -#, java-format -!Error\ reading\ the\ preferences\ file.\ Please\ delete\ (or\ move)\n{0}\ and\ restart\ Arduino.= - -#: Preferences.java:299 -!Sketchbook\ location\:= - -#: Preferences.java:314 -!Select\ new\ sketchbook\ location= - -#: Preferences.java:337 -!Editor\ language\:\ = - -#: Preferences.java:342 Preferences.java:358 -!\ \ (requires\ restart\ of\ Arduino)= - -#: Preferences.java:354 -!Editor\ font\ size\:\ = - -#: Preferences.java:371 -!Show\ verbose\ output\ during\:\ = - -#: Preferences.java:373 -!compilation\ = - -#: Preferences.java:375 -!upload= - -#: Preferences.java:384 -!Verify\ code\ after\ upload= - -#: Preferences.java:393 -!Use\ external\ editor= - -#: Preferences.java:403 -!Check\ for\ updates\ on\ startup= - -#: Preferences.java:412 -!Update\ sketch\ files\ to\ new\ extension\ on\ save\ (.pde\ ->\ .ino)= - -#: Preferences.java:423 -!Automatically\ associate\ .ino\ files\ with\ Arduino= - -#: Preferences.java:433 -!More\ preferences\ can\ be\ edited\ directly\ in\ the\ file= - -#: Preferences.java:462 -!(edit\ only\ when\ Arduino\ is\ not\ running)= - -#: Preferences.java:609 -#, java-format -!ignoring\ invalid\ font\ size\ {0}=