add operator==, remoteIP and remotePort to EthernetClient

hardware/arduino/cores/arduino/Client.h

@@ -19,6 +19,8 @@ public:
   virtual void stop() = 0;
   virtual uint8_t connected() = 0;
   virtual operator bool() = 0;
+  virtual IPAddress remoteIP() = 0;
+  virtual uint16_t remotePort() = 0;
 protected:
   uint8_t* rawIPAddress(IPAddress& addr) { return addr.raw_address(); };
 };

libraries/Ethernet/EthernetClient.cpp

@@ -163,3 +163,25 @@ uint8_t EthernetClient::status() {
 EthernetClient::operator bool() {
   return _sock != MAX_SOCK_NUM;
 }
+
+bool EthernetClient::operator==(const EthernetClient& rhs) {
+  if (_sock == MAX_SOCK_NUM || rhs._sock == MAX_SOCK_NUM) return false;
+  if (W5100.readSnDPORT(_sock)!=W5100.readSnDPORT(rhs._sock)) return false;
+  uint32_t a1;
+  uint32_t a2;
+  W5100.readSnDIPR(_sock,(uint8_t*) &a1);
+  W5100.readSnDIPR(rhs._sock,(uint8_t*) &a2);
+  return a1==a2;
+}
+
+IPAddress EthernetClient::remoteIP() {
+  if (_sock == MAX_SOCK_NUM) return IPAddress(0,0,0,0);
+  uint32_t _destaddress;
+  W5100.readSnDIPR(_sock,(uint8_t*) &_destaddress);
+  return IPAddress(_destaddress);
+}
+
+uint16_t EthernetClient::remotePort() {
+  if (_sock == MAX_SOCK_NUM) return 0;
+  return W5100.readSnDPORT(_sock);
+}

libraries/Ethernet/EthernetClient.h

@@ -24,6 +24,9 @@ public:
   virtual void stop();
   virtual uint8_t connected();
   virtual operator bool();
+  virtual bool operator==(const EthernetClient&);
+  virtual IPAddress remoteIP();
+  virtual uint16_t remotePort();
 
   friend class EthernetServer;
   

libraries/Ethernet/examples/ChatServer/ChatServer.ino

@@ -2,7 +2,8 @@
  Chat  Server
  
  A simple server that distributes any incoming messages to all
- connected clients.  To use telnet to  your device's IP address and type.
+ connected clients but the client the message comes from.
+ To use telnet to  your device's IP address and type.
  You can see the client's input in the serial monitor as well.
  Using an Arduino Wiznet Ethernet shield. 
  
@@ -14,6 +15,8 @@
  by David A. Mellis
  modified 9 Apr 2012
  by Tom Igoe
+ redesigned to make use of operator== 25 Nov 2013
+ by Norbert Truchsess
  
  */
 
@@ -25,14 +28,15 @@
 // gateway and subnet are optional:
 byte mac[] = { 
   0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
-IPAddress ip(192,168,1, 177);
+IPAddress ip(192,168,0,6);
-IPAddress gateway(192,168,1, 1);
+IPAddress gateway(192,168,0, 1);
-IPAddress subnet(255, 255, 0, 0);
+IPAddress subnet(255, 255, 255, 0);
 
 
 // telnet defaults to port 23
 EthernetServer server(23);
-boolean alreadyConnected = false; // whether or not the client was connected previously
+
+EthernetClient clients[4];
 
 void setup() {
   // initialize the ethernet device
@@ -54,26 +58,55 @@ void loop() {
   // wait for a new client:
   EthernetClient client = server.available();
 
-  // when the client sends the first byte, say hello:
   if (client) {
-    if (!alreadyConnected) {
+
+    boolean newClient = true;
+    for (byte i=0;i<4;i++) {
+      if (clients[i]==client) {
+        newClient = false;
+        break;
+      }
+    }
+
+    if (newClient) {
+      for (byte i=0;i<4;i++) {
+        if (clients[i]!=client) {
+          clients[i] = client;
+          Serial.print("found slot: ");
+          Serial.println(i);
+          break;
+        }
+      }
+
       // clead out the input buffer:
       client.flush();    
       Serial.println("We have a new client");
       client.println("Hello, client!"); 
-      alreadyConnected = true;
+      client.print("your IP: ");
+      client.println(client.remoteIP());
+      client.print("your port: ");
+      client.println(client.remotePort()); 
     }
 
     if (client.available() > 0) {
       // read the bytes incoming from the client:
       char thisChar = client.read();
       // echo the bytes back to the client:
-      server.write(thisChar);
+      for (byte i=0;i<4;i++) {
+        if (!clients[i] || (clients[i]==client)) {
+          continue;
+        }
+        clients[i].write(thisChar);
+      }
       // echo the bytes to the server as well:
       Serial.write(thisChar);
     }
   }
+  for (byte i=0;i<4;i++) {
+    if (!(clients[i].connected())) {
+      clients[i].stop();
+      ~clients[i];
+      clients[i]=EthernetClient();
+    }
+  }
 }
-
-
-