diff --git a/hardware/arduino/avr/programmers.txt b/hardware/arduino/avr/programmers.txt
index 0c38151b0..2836a404c 100644
--- a/hardware/arduino/avr/programmers.txt
+++ b/hardware/arduino/avr/programmers.txt
@@ -51,18 +51,6 @@ usbGemma.program.tool=avrdude
 usbGemma.program.extra_params=
 usbGemma.config.path={runtime.platform.path}/bootloaders/gemma/avrdude.conf
 
-# STK500 firmware version v1 and v2 use different serial protocols.
-# Using the 'stk500' protocol tells avrdude to try and autodetect the
-# firmware version. If this leads to problems, we might need to add
-# stk500v1 and stk500v2 entries to allow explicitely selecting the
-# firmware version.
-stk500.name=Atmel STK500 development board
-stk500.communication=serial
-stk500.protocol=stk500
-stk500.program.protocol=stk500
-stk500.program.tool=avrdude
-stk500.program.extra_params=-P{serial.port}
-
 ## Notes about Dangerous Prototypes Bus Pirate as ISP
 ## Bus Pirate V3 need Firmware v5.10 or later
 ## Bus Pirate V4 need Firmware v6.3-r2151 or later
@@ -76,3 +64,14 @@ buspirate.program.protocol=buspirate
 buspirate.program.tool=avrdude
 buspirate.program.extra_params=-P{serial.port}
 
+# STK500 firmware version v1 and v2 use different serial protocols.
+# Using the 'stk500' protocol tells avrdude to try and autodetect the
+# firmware version. If this leads to problems, we might need to add
+# stk500v1 and stk500v2 entries to allow explicitely selecting the
+# firmware version.
+stk500.name=Atmel STK500 development board
+stk500.communication=serial
+stk500.protocol=stk500
+stk500.program.protocol=stk500
+stk500.program.tool=avrdude
+stk500.program.extra_params=-P{serial.port}