rooty/Arduino
1
0
Fork 0
mirror of https://github.com/arduino/Arduino.git synced 2024-11-29 10:24:12 +01:00
Code Issues Releases Activity

Add manual page

Browse Source 
This adds a description of commandline options, files used and some
preferences in proper Unix manpage format. It is written in asciidoc,
which can easily be converted to both a native troff manpage, or HTML
(the latter can be done by github on-demand).
This commit is contained in:
Matthijs Kooijman 2013-12-09 10:45:24 +01:00
parent 76645b957d
commit fe2bec59b7
1 changed files with 209 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

209
build/shared/manpage.adoc Normal file
View File

@ -0,0 +1,209 @@
// Generate a manpage with: a2x -f manpage manpage.adoc
// or HTML with: a2x -f xhtml manpage.adoc
//
// This file uses {empty}:: in some places, to allow putting multiple
// paragraphs inside a single label list item. This is a bit ugly and
// non-semantic, but it seems this is the best way to do this. Asciidoc
// also supports putting a plus sign on a line by itself to join two
// paragraphs into a single list item. However, the indentation on the
// second paragraph makes that formatted with a fixed-size font.
// Removing the indentation completely makes the asciidoc source very
// unreadable. Also, for the --board option, there is a a paragraph,
// followed by a list, followed by another paragraph. The + approach can
// only put the latter paragraph into the inner list, not the outer
// one...
ARDUINO(1)
==========
:doctype: manpage
NAME
----
arduino - Integrated development environment for Arduino boards
SYNOPSIS
--------
*arduino* ['FILE.ino'...]
*arduino* [*--verify*|*--upload*] [*--board* __package__:__arch__:__board__[:__parameters__]] [*--port* __portname__] [*--pref* __name__=__value__] [*-v*|*--verbose*] [__FILE.ino__]
DESCRIPTION
-----------
The 'arduino' integrated development environment allows editing,
compiling and uploading sketches (programs) for Arduino
(and compatible) microcontroller boards.
Normally, running the arduino command starts the IDE, optionally loading
any .ino files specified on the commandline.
Alternatively, if *--verify* or *--upload* is given, no graphical
interface will be shown and instead a one-off verify (compile) or upload
will be done. A single .ino file should be given. If the sketch contains
multiple .ino files, any one can be specified on the commandline, but
the entire sketch will be compiled.
When running in a one-off mode, it might be useful to set the
*build.path* preference to allow keeping intermediate build results
between multiple runs and only recompile the files that changed.
Note that on MacOS X, the main executable is
'Arduino.app/Contents/MacOS/JavaApplicationStub' instead of 'arduino'.
OPTIONS
-------
*--board* __package__:__arch__:__board__[:__parameters__]::
Select the board to compile for.
* __package__ is the identifier of the vendor (the first
level folders inside the 'hardware' directory). Default
arduino boards use 'arduino'.
* __architecture__ is the architecture of the board (second level folders
inside the 'hardware' directory). Default arduino boards use
either *arduino:avr* for all AVR-based boards (like Uno, Mega
or Leonardo) or *arduino:sam* for 32bit SAM-based boards
(like Arduino Due).
* __board__ is the actual board to use, as defined in 'boards.txt'
contained in the architecture folder selected. For example,
*arduino:avr:uno* for the Arduino Uno,
*arduino:avr:diecimila* for the Arduino Duemilanove or
Diecimila, or *arduino:avr:mega* for the Arduino Mega.
* __parameters__ is a comma-separated list of boards specific parameters
that are normally shown under submenus of the "Tools" menu. For
example *arduino:avr:nano:cpu=atmega168* to Select the mega168
variant of the Arduino Nano board.
{empty}::
If this option is not passed, the value from the current
preferences is used (e.g., the last board selected in the IDE).
*--port* __portname__::
Select the serial port to perform upload of the sketch.
On linux and MacOS X, this should be the path to a device file (e.g.,
*/dev/ttyACM0*). On Windows, this should be the name of the serial
port (e.g., *COM3*).
{empty}::
If this option is not passed, the value from the current
preferences is used (e.g., the last port selected in the IDE).
*-v, --verbose*::
Enable verbose mode during build and upload. If this option is
not given, verbose mode is disabled regardless of the current
preferences.
*--pref* __name__=__value__::
Sets the preference __name__ to the given __value__.
{empty}::
Currently the preferences set are saved to 'preferences.txt', but
this might change in the future (making them only active during
the current invocation).
{empty}::
Note that the preferences you set with this option are not
validated: Invalid names will be set but never used, invalid
values might lead to an error later on.
*--upload*::
Build and upload the sketch.
*--verify*::
Build the sketch.
PREFERENCES
-----------
Arduino keeps a list of preferences, as simple name and value pairs.
Below, a few of them are documented but a lot more are available.
*sketchbook.path*::
The path where sketches are (usually) stored. This path can also
contain some special subdirectories (see FILES below).
*update.check*::
When set to true, the IDE checks for a new version on startup.
*editor.external*::
When set to true, use an external editor (the IDE does not allow
editing and reloads each file before verifying).
*build.path*::
The path to use for building. This is where things like the
preprocessed .cpp file, compiled .o files and the final .hex
file go.
{empty}::
If set, this directory should already exist before running the
arduino command.
{empty}::
If this preference is not set (which is normally the case), a
new temporary build folder is created on every run and deleted
again when the application is closed.
EXIT STATUS
-----------
*0*:: Success
*1*:: Build failed or upload failed
*2*:: Sketch not found
*3*:: Invalid (argument for) commandline option
FILES
-----
*~/.arduino15/preferences.txt*::
This file stores the preferences used for the IDE, building and
uploading sketches.
*My Documents/Arduino/* (Windows)::
*~/Documents/Arduino/* (Mac OS X)::
*~/Arduino/* (Linux)::
This directory is referred to as the "Sketchbook" and contains
the user's sketches. The path can be changed through the
*sketchbook.path* preference.
{empty}::
Apart from sketches, three special directories can be inside the
sketchbook:
*libraries*:::
Libraries can be put inside this directory, one library
per subdirectory.
*hardware*:::
Support for third-party hardware can be added through
this directory.
*tools*:::
External code-processing tools (that can be run through
the Tools menu of the IDE) can be added here.
EXAMPLES
--------
Start the Arduino IDE, with two files open:
arduino /path/to/sketch/sketch.ino /path/to/sketch/extra.ino
Compile and upload a sketch using the last selected board and serial port
arduino --upload /path/to/sketch/sketch.ino
Compile and upload a sketch to an Arduino Nano, with an Atmega168 CPU,
connected on port '/dev/ttyACM0':
arduino --board arduino:avr:nano:cpu=atmega168 --port /dev/ttyACM0 --upload /path/to/sketch/sketch.ino
Compile a sketch, put the build results in the 'build' directory an
re-use any previous build results in that directory.
arduino --pref build.path=/path/to/sketch/build --verify /path/to/sketch/sketch.ino
RESOURCES
---------
Web site: <http://arduino.cc/>
Help on projects and programming: <http://forum.arduino.cc/>
Report bugs: <http://github.com/arduino/Arduino/issues>
IDE and framework development mailing list: <https://groups.google.com/a/arduino.cc/forum/#!forum/developers>