Peter Van Hoyweghen
|
82e5d4a88d
|
Remove change history to make room for documentation.
|
2015-08-31 22:17:12 +02:00 |
|
Peter Van Hoyweghen
|
2c1728f086
|
Use digitalWrite() only with values HIGH and LOW.
|
2015-08-30 20:36:39 +02:00 |
|
Peter Van Hoyweghen
|
e3866e0ef5
|
Elaborate configuration of which pins to use: support HOODLOADER2 and old Uno style wiring.
|
2015-08-30 20:27:38 +02:00 |
|
Peter Van Hoyweghen
|
13cc57ed7e
|
Reset target before driving SCK or MOSI, reset sequence as in AVR datasheets under "Serial Programming Algorithm"
|
2015-08-26 22:43:00 +02:00 |
|
Peter Van Hoyweghen
|
044a7b78c7
|
Fix warnings. Use unsigned int to represent a (word) address: the compiler will use the most efficient type on each platform: 32 bit on arm,
16 bit on avr which is is big enough.
|
2015-07-29 21:37:04 +02:00 |
|
Peter Van Hoyweghen
|
d271c1c8a2
|
BitBangedSPI::begin(): initialize levels of SCK and MOSI. Correct indentation.
|
2015-07-28 22:31:34 +02:00 |
|
Peter Van Hoyweghen
|
8d95899450
|
Call SPI.beginTransaction() after SPI.begin()
|
2015-07-28 22:26:58 +02:00 |
|
Peter Van Hoyweghen
|
89184a3668
|
Use new style SPI::beginTransaction() api, make SPI_CLOCK configurable, select hardware or software SPI based on SPI_CLOCK.
|
2015-07-14 23:06:54 +02:00 |
|
Peter Van Hoyweghen
|
50f9e539d8
|
Ensure minimum spi pulse width.
|
2015-07-14 21:20:39 +02:00 |
|
Peter Van Hoyweghen
|
5a04ab2a32
|
Don't pulse error led if avrdude enters programming mode twice
|
2015-07-13 21:49:42 +02:00 |
|
Peter Van Hoyweghen
|
eca360bf42
|
Fix typo: SPI_CLOCK_DIV128
|
2015-07-13 21:30:34 +02:00 |
|
Peter Van Hoyweghen
|
c8b5e99267
|
Configure the serial port to use. Prefer native USB port if the Arduino has one.
|
2015-07-13 21:30:33 +02:00 |
|
Peter Van Hoyweghen
|
64e52d8016
|
Implement bitbang SPI for slow clock devices. (Sylvan Butler).
|
2015-07-13 21:22:00 +02:00 |
|
Peter Van Hoyweghen
|
a17a757722
|
Configure SPI pins as input when target is not in reset.
|
2015-07-13 21:22:00 +02:00 |
|
Peter Van Hoyweghen
|
15da182399
|
Support at89sx mcu's by adding the possibility to specify the polarity of the target reset signal.
|
2015-07-13 21:21:58 +02:00 |
|
Peter Van Hoyweghen
|
56e09109df
|
The delay between reset and the enter progmode command got lost when introducing the SPI library. Put it back in.
|
2015-07-13 21:21:57 +02:00 |
|
Peter Van Hoyweghen
|
93b31b6cfa
|
Simply use pin 10 to reset the target. It works for all Arduino's and allows the same "ArduinoISP shield" to be used on all of them. Such a shield has an ISP connector that: - wires MISO,MOSI, SCK, GND and 5V to the ISP connector of the programming Arduino - wires RESET to pin 10 of the programming Arduino.
|
2015-07-13 21:21:57 +02:00 |
|
Peter Van Hoyweghen
|
ad2a32fd24
|
Avoid delay in heartbeat. That way we can also set the baudrate back to the value used in the IDE. In fact, with this fix, baud rates of up to 115200 work also.
|
2015-07-13 21:21:57 +02:00 |
|
Randall Bohn (Huckle)
|
aeaed27e13
|
Use SPI library.
|
2015-07-13 21:18:17 +02:00 |
|
Randall Bohn (Huckle)
|
8dfe833e49
|
Set error if GET_SIGN_ON not followed by CRC_EOP
|
2015-07-13 21:13:54 +02:00 |
|
Randall Bohn (Huckle)
|
d968c7a8ee
|
Don't start_pmode if we're already in pmode.
|
2015-07-13 21:13:53 +02:00 |
|
Randall Bohn (Huckle)
|
a2a06f56cc
|
Be more specific about datatypes in the parameter struct.
|
2015-07-13 21:13:53 +02:00 |
|
Federico Fissore
|
5e98cd8528
|
Examples: mass code format. See example_formatter.conf
|
2015-07-06 15:19:05 +02:00 |
|
Federico Fissore
|
7d8d07889f
|
ArduinoISP example moved under 11.ArduinoISP
|
2015-06-23 10:16:09 +02:00 |
|