Cristian Maglie
2b66d840b4
Fixed some firmware filenames
2012-12-10 10:35:19 +01:00
Cristian Maglie
bc6836f266
Added Esplora precompiled firmware
2012-12-07 21:24:24 +01:00
Cristian Maglie
948a5c89e4
Added support for Arduino Esplora
2012-12-07 18:11:07 +01:00
Cristian Maglie
ad93a18b85
Saved old Leonardo and Micro production firmware.
...
Rebuilt firmware for Micro.
Added pre-loaded Blink to new firmwares.
2012-11-30 16:34:04 +01:00
Kristian Lauszus
ef6f1eb11d
Improved Leonardo bootloader
...
The power-on reset detection didn't work properly, but has now been
fixed
2012-11-30 15:32:11 +01:00
Zachary Eveland
d92a86f7b7
Caterina changes to support Micro. includes newly rebuilt version of the bootloader merged with Blink produced using 1.0.2
2012-11-23 16:09:32 -05:00
David A. Mellis
839b58c1ae
Updating Micro bootloader firmware.
2012-11-02 17:45:57 -04:00
David A. Mellis
ac1c8f921b
Adding Micro.
2012-10-27 14:12:26 -04:00
Zach Eveland
2e575db249
changed PID values for Leonardo bootloader and sketch
...
done to avoid driver problems for users who installed the pre-release bootloader and driver
2012-04-25 15:56:18 -04:00
Zach Eveland
bb9a4f89cc
merged Caterina with Blink
2012-04-11 23:24:04 -04:00
Zach Eveland
7e235dbff8
fixed logic bug in Caterina that could stop the bootloader from entering self-programming mode
2012-04-11 23:19:05 -04:00
Zach Eveland
d3a8e450ee
Micro I hardly knew ye
2012-04-09 10:12:14 -04:00
Zach Eveland
3f6342e9bb
Micro and Leonardo bootloaders for distribution are now merged with Blink sketch
2012-04-09 08:08:34 -04:00
Zach Eveland
d02e4481d3
PID and VID are no longer hard-coded in bootloader. instead they are passed in at compile-time from makefile. also added and renamed built bootloader images for Micro and Leonardo
2012-04-09 08:03:56 -04:00
Zach Eveland
a05a0d531b
bugfix for Caterina not starting sketch if "verify upload" turned off in IDE.
...
Previously, if avrdude skipped the upload step the read while write memory might never be reenabled. This would prevent the bootloader from ending and the sketch from starting - the bootloader just continued to run even after a successful upload. Now enable RWW when we receive the AVR109 "Exit bootloader" 'E' command. Had to disable lock bit changing support in the bootloader to free up flash for the change - will anyone miss it?
2012-03-14 17:48:11 -04:00
Zach Eveland
2a19c327bb
changed Caterina timeout after self-programming to 500 ms (from 250 ms)
...
attempt to fix bug reported by Dave Mellis:
"avrdude: ser_close(): can’t reset attributes for device: Invalid argument"
is thrown after attempting an upload in the IDE (though the upload seems to be successful)
2012-03-14 17:07:14 -04:00
Zach Eveland
30421143f9
give Leonardo bootloader 250 ms to finish housekeeping before leaving self-programming mode
...
Earlier approach had bootloader end as soon as it was told to. On Linux this caused problems with avrdude because the microcontroller never had a chance to send an acknowledgement.
2012-03-08 14:20:12 -05:00
Zach Eveland
33116711b0
removed old version of Leonardo's caterina bootloader, replaced with LUFA-based caterina
2012-03-08 13:47:42 -05:00
Zach Eveland
0fc76a6b87
made Leonardo and Micro bootloader PIDs same as sketch PIDs
2012-01-10 21:23:01 -05:00
Zach Eveland
2dfb0dce2c
restored composite and non-composite device descriptors (removed in 4b05c3fc75)
...
Windows wants to see both types of device descriptors.
2012-01-10 20:52:57 -05:00
Zach Eveland
77b40e6bba
reenabled HID to force Leonardo bootloader to enumerate as a composite device
2012-01-10 17:04:32 -05:00
Zach Eveland
932afb8428
renamed DiskLoader to Caterina (after Leonardo's mom)
2012-01-10 16:29:47 -05:00
