1
0
mirror of https://github.com/arduino/Arduino.git synced 2024-12-04 15:24:12 +01:00
Commit Graph

223 Commits

Author SHA1 Message Date
Arturo Guadalupi
bb1f584019 Added Arduino Zero exclusion to README 2015-09-28 11:29:18 +02:00
Arturo Guadalupi
9eaea4205d Modified reference to Leonardo only in the examples
According to #3786 removed the reference to Leonardo only in while(!Serial) of the examples.
Changed in in "wait for serial port to connect. Needed for native USB port only"
2015-09-21 14:58:58 +02:00
Nico
9b91da35b7 Remove Raw HID definitions at wrong place 2015-09-20 11:04:42 +02:00
Cristian Maglie
a1e2c4fa8e Fixed wrong category in EEPROM
See #3812
2015-09-18 11:23:11 +02:00
Cristian Maglie
949ef094f1 Added categories to libraries
Fix #3812
2015-09-18 11:01:08 +02:00
Nate Williams
64cee7bbbc Wire (AVR): Fix bug with repeated START
Fix #66
2015-08-26 16:02:02 +02:00
Sandeep Mistry
d00a3ceba3 implement Wire.end() for AVR core 2015-08-25 10:24:24 -04:00
NicoHood
fd6f57d2d7 Added 16 byte endpoint support 2015-08-12 17:48:17 +02:00
NicoHood
a1cf7042b2 Fixed HID Reports >255 bytes 2015-08-12 17:48:17 +02:00
Martino Facchin
af290fc5a3 rework HID-based libraries and add Due fallback 2015-07-16 13:13:53 +02:00
Martino Facchin
e1a0350062 allow HID submodules to create runtime descriptors
with this PR you can add

\#include Keyboard.h
\#include Mouse.h
\#include HID.h

in the top of the sketch and you will expose a Mouse+Keyboard

From the library pow, simply add

static HID_Descriptor cb = {
	.length = sizeof(_hidReportDescriptor),
	.descriptor = _hidReportDescriptor,
};
static HIDDescriptorListNode node(&cb);
HID.AppendDescriptor(&node);

in the class' constructor and you are done!
2015-07-16 13:13:52 +02:00
Martino Facchin
5defaeaa97 rework HID class functions scopes 2015-07-16 13:13:52 +02:00
Martino Facchin
97a3771772 rename Setup typedef struct to USBSetup
was really too common
2015-07-16 13:13:52 +02:00
Martino Facchin
dee43a19d7 fix HID headers 2015-07-16 13:13:51 +02:00
Martino Facchin
9074b1ed18 fix HID descriptors bigger than 127 bytes 2015-07-16 13:13:51 +02:00
Martino Facchin
91a115a353 move HID library to AVR specific location 2015-07-16 13:13:51 +02:00
Federico Fissore
5e98cd8528 Examples: mass code format. See example_formatter.conf 2015-07-06 15:19:05 +02:00
Matthew Lowe
39c3f8bf61 Support for repeated starts added to SAM Wire library
Additional interface method ported to avr for compatibility
Fix issue #2428.
2015-07-03 16:59:30 +02:00
Federico Fissore
9166828bfe Due to website configuration changes, every url starting with http://arduino.cc has been changed to http://www.arduino.cc. Fixes #3191 2015-05-20 17:10:06 +02:00
Federico Fissore
42b07f0337 Libraries bundled with cores will take the type of that core, instead of relying on an undocumented 'types' property. Fixes #2875 2015-05-19 12:24:11 +02:00
Arturo Guadalupi
5199b0f6d3 Fixes #2969:
This fixes the Wire examples that uses I2C reserved address (from 0 to 7) substituting them with 8 that is the first one available and that can be used.

I also modified the wire reference
http://www.arduino.cc/en/reference/wire
according to this fact.
2015-05-14 11:27:00 +02:00
Federico Fissore
6e498ee5b9 LibraryManager: better type filtering 2015-03-27 14:51:19 +01:00
Martino Facchin
046f335d5f Merge pull request #2812 from facchinm/test_pr2794
EEPROM library V2
2015-03-24 09:24:00 +00:00
Martino Facchin
54da627789 EEPROM: examples: fix Serial for board Leonardo 2015-03-24 10:20:00 +01:00
Chris--A
bd2b9d1afd Fixed EEPROM examples and added readme 2015-03-24 13:58:01 +10:00
Chris--A
ab14475248 Updated EEPROM examples.
Removed hard coded lengths, which were incorrect for standard Arduino's
now.
2015-03-20 12:06:20 +10:00
Chris--A
28cff64b80 Small tweaks to EEPROM lib and examples. 2015-03-19 17:13:32 +10:00
Victor Aprea
0e898d5e03 Do not influence state of SS if it's already been set to an output previously, e.g. by user sketch
squashes and closes PR #2659
2015-03-18 10:37:40 +01:00
Chris--A
d6637e7f08 Updated EEPROM storage class
To avoid having a .cpp just for an extern variable definition, `static`
has been chosen over `extern`.

As the `EEPROMClass` class simply wraps functionality located elsewhere,
it is completely compiled away. Even though each translation unit which
includes the header will get a copy with internal linkage, there is no
associated overhead.

More info
[here](http://stackoverflow.com/questions/29098518/extern-variable-only-in-header-unexpectedly-working-why)
2015-03-18 18:56:08 +10:00
Chris--A
80f01fbab1 Added additional examples to EEPROM lib 2015-03-17 17:17:08 +10:00
Chris--A
bed78fd144 Added new version of EEPROM library. 2015-03-17 17:13:47 +10:00
Martino Facchin
6a86cbc793 Merge branch 'ide-1.5.x' into SoftwareSerial 2015-03-05 12:33:35 +01:00
Martino Facchin
b95533ffd0 SoftwareSerial: match bool API with HardwareSerial 2015-03-05 12:30:01 +01:00
Cristian Maglie
e93be4855f Corrected some email contacts. 2015-02-05 16:47:22 +01:00
Matthijs Kooijman
90ca3934f2 Prevent low pulse on TX initialization in SoftwareSerial
Previously, the TX pin would be set to output first and then written
high (assuming non-inverted logic). When the pin was previously
configured for input without pullup (which is normal reset state), this
results in driving the pin low for a short when initializing. This could
accidenttally be seen as a stop bit by the receiving side.

By first writing HIGH and then setting the mode to OUTPUT, the pin will
have its pullup enabled for a short while, which is harmless.
2015-01-26 17:04:26 +01:00
Matthijs Kooijman
9cf3740a03 Remove unneeded #ifdef in SoftwareSerial
The debugPulse function definition already checks for _DEBUG, resulting
in an empty function definiton and the function call being optimized
away.
2015-01-26 17:03:25 +01:00
Matthijs Kooijman
ead2881b1c Fix SoftwareSerial timings
Instead of using a lookup table with (wrong) timings, this calculates
the timings in SoftwareSerial::begin. This is probably a bit slower, but
since it typically happens once, this shouldn't be a problem.
Additionally, since the lookup tables can be removed, this is also a lot
smaller, as well as supporting arbitrary CPU speeds and baudrates,
instead of the limited set that was defined before.

Furthermore, this switches to use the _delay_loop_2 function from
avr-libc instead of a handcoded delay function. The avr-libc function
only takes two instructions, as opposed to four instructions for the old
one. The compiler also inlines the avr-libc function, which makes the
timings more reliable.

The calculated timings directly rely on the instructions generated by
the compiler, since a significant amount of time is spent processing
(compared to the delays, especially at higher speeds). This means that
if the code is changed, or a different compiler is used, the
calculations might need changing (though a few cycles more or less
shouldn't cause immediate breakage).

The timings in the code have been calculated from the assembly generated
by gcc 4.8.2 and gcc 4.3.2.

The RX baudrates supported by SoftwareSerial are still not unlimited. At
16Mhz, using gcc 4.8.2, everything up to 115200 works. At 8Mhz, it works
up to 57600. Using gcc 4.3.2, it also works up to 57600 at 16Mhz and up
to 38400 at 8Mhz. Note that at these highest speeds, communication
works, but is still quite sensitive to other interrupts (like the
millis() interrupts) when bytes are sent back-to-back, so there still
are corrupted bytes in RX.

TX works up to 115200 for all combinations of compiler and clock rates.

This fixes #2019
2015-01-26 17:03:25 +01:00
Matthijs Kooijman
08fa593916 Disable the RX PCINT inside SoftwareSerial::recv
Before, the interrupt would remain enabled during reception, which would
re-set the PCINT flag because of the level changes inside the received
byte. Because interrupts are globally disabled, this would not
immediately trigger an interrupt, but the flag would be remembered to
trigger another PCINT interrupt immediately after the first one is
processed.

Typically this was not a problem, because the second interrupt would see
the stop bit, or an idle line, and decide that the interrupt triggered
for someone else. However, at high baud rates, this could cause the
next interrupt for the real start bit to be delayed so much that the
byte got corrupted.

By clearing the interrupt mask bit for just the RX pin (as opposed to
the PCINT mask bit for the entire port), any PCINT events on other bits
can still set the PCINT flag and be processed as normal. In this case,
it's likely that there will be corruption, but that's inevitable when
(other) interrupts happen during SoftwareSerial reception.
2015-01-26 17:03:25 +01:00
Matthijs Kooijman
ce6b0f89e3 Optimize SoftwareSerial::setRxIntMsk()
This precalculates the mask register and value, making setRxIntMask
considerably less complicated. Right now, this is not a big deal, but
simplifying it allows using it inside the ISR next.
2015-01-26 17:03:25 +01:00
Matthijs Kooijman
ddbe3174f0 In SoftwareSerial::recv, only calculate the new tail once
This shortens the generated code a bit more.
2015-01-26 17:03:25 +01:00
Matthijs Kooijman
9d8f350ffe Mark SoftwareSerial::recv and handle_interrupt as always_inline
Since those functions are only called once now, it makes sense to inline
them. This saves a few bytes of program space, but also saves a few
cycles in the critical RX path.
2015-01-26 17:03:25 +01:00
Matthijs Kooijman
5af847d3a4 In SoftwareSerial, use ISR_ALIASOF to prevent duplication
Previously, up to four separate but identical ISR routines were defined,
for PCINT0, PCINT1, PCINT2 and PCINT3. Each of these would generate
their own function, with a lot of push-popping because another function
was called.

Now, the ISR_ALIASOF macro from avr-libc is used to declare just the
PCINT0 version and make all other ISRs point to that one, saving a lot
of program space, as well as some speed because of improved inlining.

On an Arduino Uno with gcc 4.3, this saves 168 bytes. With gcc 4.8, this
saves 150 bytes.
2015-01-26 17:03:25 +01:00
Matthijs Kooijman
87f89f6100 Optimize SoftwareSerial::recv
Similar to SoftwareSerial::write, this rewrites the loop to only touch
the MSB and then shift those bits up, allowing the compiler to generate
more efficient code. Unlike the write function however, it is not needed
to put all instance variables used into local variables, for some reason
the compiler already does this (and doing it manually even makes the
code bigger).

On the Arduino Uno using gcc 4.3 this saves 26 bytes. Using gcc 4.8 this
saves 30 bytes.

Note that this removes the else clause in the code, making the C code
unbalanced, which looks like it breaks timing balance. However, looking
at the code generated by the compiler, it turns out that the old code
was actually unbalanced, while the new code is properly balanced.
2015-01-26 17:03:25 +01:00
Matthijs Kooijman
764f24266e Further optimize SoftwareSerial::write
This change restructures the loop, to help the compiler generate shorter
code (because now only the LSB of the data byte is checked and
subsequent bytes are shifted down one by one, it can use th "skip if bit
set" instruction).

Furthermore, it puts most attributes in local variables, which causes
the compiler to put them into registers. This makes the timing-critical
part of the code smaller, making it easier to provide accurate timings.

On an Arduino uno using gcc 4.3, this saves 58 bytes. On gcc 4.8, this
saves 14 bytes.
2015-01-26 17:03:25 +01:00
Matthijs Kooijman
80ea38b1dc Mark SoftwareSerial::tx_pin_write as "always_inline"
Somehow gcc 4.8 doesn't inline this function, even though it is always
called with constant arguments and can be reduced to just a few
instructions when inlined. Adding the always_inline attribute makes gcc
inline it, saving 46 bytes on the Arduino uno.

gcc 4.3 already inlined this function, so there are no space
savings there.
2015-01-26 17:03:25 +01:00
Matthijs Kooijman
416198a03b Simplify SoftwareSerial::write
Before, there was nearly identical code for the inverted and regular
cases. However, simply inverting the byte in the inverted case allows
using the regular code twice, reducing the generated code size by 100
bytes (on an Arduino Uno and gcc 4.3, on gcc 4.8 the reduction is 50
bytes).
2015-01-26 17:03:25 +01:00
Matthijs Kooijman
6685aa999c Use stopListening() in SoftwareSerial::end()
stopListening also disabled the interrupt, if needed, so calling that
function makes more sense. Since stopListening only disables the
interrupt when the current SoftwareSerial is the active object, and that
can only be the case when _rx_delay_stopbit is non-zero, there is no
need to separately check _rx_delay_stopbit anymore.
2015-01-26 17:03:25 +01:00
Matthijs Kooijman
f3aa5f23c4 Fix race condition in SoftwareSerial::overflow()
If an interrupt causing overflow would occur between reading
_buffer_overflow and clearing it, this overflow condition would be
immediately cleared and never be returned by overflow().

By only clearing the overflow flag if an overflow actually occurred,
this problem goes away (worst case overflow() returns false even though
an overflow _just_ occurred, but then the next call to overflow() will
return true).
2015-01-26 17:03:25 +01:00
Matthijs Kooijman
b1de3e6621 Toggle SoftwareSerial interrupts when starting / stopping to listen
This prevents interrupts from triggering when the SoftwareSerial
instance is not even listening.

Additionally, this removes the need to disable interrupts in
SoftwareSerial::listen, since no interrupts are active while it touches
the variables.
2015-01-26 17:03:25 +01:00
Matthijs Kooijman
934393398b Add SoftwareSerial::stopListening()
This allows one to explicitly stop a SoftwareSerial instance from
listening, without having to make another one listening.
2015-01-26 17:03:25 +01:00