Martyn Ranyard
94af627772
Bootloaders: wrong #ifdefs, should be defined() not just tested (i.e. noteq 0)
...
Close #126
2015-07-14 16:16:31 +02:00
Martyn Ranyard
59b5311cdf
Bootloaders: adds support for 328-nonp chips
2015-07-14 12:55:22 +02:00
Martyn Ranyard
3831c9c519
-O2 in new avr-gcc makes too big a bootloader to fit on 328(and 328p)
2015-07-14 12:37:36 +02:00
Martyn Ranyard
8f5ca0a943
Fixed EEPE flag check.
...
Here, using the flag itself makes the bootloader build where it currently does not for the 328 amongst others
2015-07-14 12:28:13 +02:00
Federico Fissore
fe3fa56a15
Yun bootloader without blink
2015-07-07 17:15:42 +02:00
Federico Fissore
5e98cd8528
Examples: mass code format. See example_formatter.conf
2015-07-06 15:19:05 +02:00
Matthew Lowe
39c3f8bf61
Support for repeated starts added to SAM Wire library
...
Additional interface method ported to avr for compatibility
Fix issue #2428 .
2015-07-03 16:59:30 +02:00
Federico Fissore
431f319aca
Removed a handful of SVN expansion keywords. See #277
2015-07-03 10:38:07 +02:00
Martino Facchin
98d0a72fdd
Merge pull request #1869 from kevin-pololu/due-wire-available
...
SAM Wire: fixed NACK/timeout behavior of requestFrom() and available()
2015-07-01 12:43:44 +00:00
Federico Fissore
5f31f4b8dd
Fixed missing "sketch" folders in some paths of both AVR and SAM cores
2015-06-29 16:10:54 +02:00
Federico Fissore
e097439eab
Compiler: sketch files get compiled into "sketch"
2015-06-29 15:11:45 +02:00
Federico Fissore
5a35be06da
Compiler: cores files get compiled under "core", libraries under "libraries". Fixes #2997
2015-06-29 15:11:45 +02:00
Matthijs Kooijman
07c4d958c0
Warn about increasing HardwareSerial buffers to > 256
...
Properly supporting bigger buffers need better atomicity code, which
isn't implemented yet. Until it is, best to add a warning. See #2405 .
2015-06-18 16:36:07 +02:00
Matthijs Kooijman
5b4ebcf959
Support the Atmel STK500 development board for ISP
2015-06-05 18:43:25 +02:00
ziotibia81
ec4006d1ee
Added comment about Bus Pirate
2015-06-05 18:43:23 +02:00
ziotibia81
cb9a14835c
Added support for Dangerous Prototypes Bus Pirate as ISP
...
Close #2385
2015-06-05 18:43:12 +02:00
Fede85
4f957da22a
add Arduino Gemma Bootloader source files
2015-06-01 20:00:54 +02:00
Martino Facchin
ed1b8eb486
Add a Stream::find(char) method
2015-06-01 14:06:32 +00:00
Cristian Maglie
074d910857
Fixed unused argument warning
2015-05-30 15:19:44 +02:00
Cristian Maglie
2cbdc121e9
Fixed unused variables warnings and indentation
2015-05-29 20:02:50 +02:00
chromhelm
cd9d30a8fe
Saving some bytes in HardwareSerial::write
2015-05-29 18:12:24 +02:00
Martino Facchin
a7d81d0b1c
pulseIn: add alternative implementation based on micros()
2015-05-29 15:01:38 +02:00
Martino Facchin
bb3963c0e9
pulseIn: add ASM implementation for Due
2015-05-29 15:01:38 +02:00
Martino Facchin
7a22827359
pulseIn: be consistent with standard API
...
return 0 if timeout has been reached
2015-05-29 15:01:38 +02:00
Martino Facchin
689c654e8d
pulseInASM: rework comment style
2015-05-29 15:01:38 +02:00
Martino Facchin
d4a80be045
pulseIn: add alternative implementation based on micros()
...
pulseInLong is suitable for long pulses in interrupt context
2015-05-29 15:01:38 +02:00
Martino Facchin
93f74f84ce
pulseIn: modify function to use ASM implementation
2015-05-29 15:01:37 +02:00
Martino Facchin
b37b0d1b6d
pulseIn: add ASM implementation
...
this assembly code was generated by avr-gcc 4.8.3
2015-05-29 15:01:37 +02:00
Martino Facchin
0c9f0d50a5
Revert "Temporary fix for pulseIn() regression."
...
This reverts commit 8ddc5198f6
.
To be substituted by ASM generated code
2015-05-29 15:01:37 +02:00
Martino Facchin
d92bf5bdaa
Merge pull request #3202 from Chris--A/randomSeed
...
Modified randomSeed, now uses unsigned long.
2015-05-28 10:54:26 +02:00
Martino Facchin
9d13023075
Merge pull request #3211 from Chris--A/println-optimize
...
Println optimize
2015-05-28 10:24:12 +02:00
Cristian Maglie
b4c5fa7109
Merge pull request #3244 from Lauszus/INT2
...
Check if INT2 is actually defined before issuing warning in detachInterrupt
2015-05-28 09:51:25 +02:00
Martino Facchin
f816e76d47
Merge pull request #3207 from chromhelm/master
...
Fixed bug with HWSerial flushing
2015-05-28 09:44:46 +02:00
Kristian Sloth Lauszus
272d5cc93d
Check if INT2 is actually defined before issuing warning in detachInterrupt
...
This was caused after: https://github.com/arduino/Arduino/pull/3221
2015-05-28 03:42:32 +02:00
Victor Aprea
e9045d8b8a
Add missing case to detachinterrupt
2015-05-24 20:35:23 -04:00
Christopher Andrews
527c7c2572
Updated printLn on SAM core
2015-05-23 01:56:06 +10:00
Cristian Maglie
e273178425
Indent fix.
2015-05-22 17:23:46 +02:00
Cano
c4080efdb5
zero delay fix, ADC prescaler fix
2015-05-22 17:23:46 +02:00
Cano
219914ef22
delayMicroseconds(): added support for 1Mhz, 12Mhz and 24Mhz
...
1Mhz is a default clock speed on Atmega328, many users run it on the
internal 1Mhz clock to save battery power. Up until now
delayMicroseconds() function wasn't taking this frequencies into an
account.
2015-05-22 17:23:45 +02:00
Chris--A
c617562e74
Optimize printLn calls.
2015-05-22 23:00:07 +10:00
chromhelm
ed331a817a
Fixed bug with flushing
2015-05-21 21:42:40 +02:00
Chris--A
0051eadd2a
Modified randomSeed, now uses unsigned long.
2015-05-21 16:52:42 +10:00
Federico Fissore
9166828bfe
Due to website configuration changes, every url starting with http://arduino.cc has been changed to http://www.arduino.cc . Fixes #3191
2015-05-20 17:10:06 +02:00
Cristian Maglie
977ccc6910
Added missing license on samd's pgmspace.h
...
Fixes #3145
2015-05-19 20:01:50 +02:00
Federico Fissore
42b07f0337
Libraries bundled with cores will take the type of that core, instead of relying on an undocumented 'types' property. Fixes #2875
2015-05-19 12:24:11 +02:00
Federico Fissore
c14d4fa8b4
Merge pull request #3109 from agdl/fix_i2cexamples
...
Fix for #2969 (I2C reserved addresses)
2015-05-14 14:07:43 +02:00
Arturo Guadalupi
5199b0f6d3
Fixes #2969 :
...
This fixes the Wire examples that uses I2C reserved address (from 0 to 7) substituting them with 8 that is the first one available and that can be used.
I also modified the wire reference
http://www.arduino.cc/en/reference/wire
according to this fact.
2015-05-14 11:27:00 +02:00
Nico
d2595129c5
RX and TX Serial buffer sizes can now be defined independently
...
Fixes #2597
2015-05-12 15:09:48 +02:00
Martino Facchin
7f8cba667d
Due watchdog: change flags to effectively reset board
2015-05-08 14:16:12 +02:00
Bob Cousins
d2c510d166
Add Due watchdog functions; modified according to feedback supplied
2015-05-08 14:16:12 +02:00