1
0
mirror of https://github.com/arduino/Arduino.git synced 2024-12-13 23:48:46 +01:00
Commit Graph

2083 Commits

Author SHA1 Message Date
David A. Mellis
e7ff928762 Putting the Uno lock bits back. 2011-10-10 12:28:09 -04:00
WestfW
8efc3920f9 Explicitly set the SHELL variable when OS=windows, so that we'll use
the same shell regardless of whether other shells are installed
(different shells have different behavior WRT directory component
separators, so this matters.

http://code.google.com/p/arduino/issues/detail?id=667 )
(cherry picked from commit fc8cacb9a3)
2011-10-10 12:11:18 -04:00
WestfW
de4d73511d Oops. Add atmega8.lst/hex and atmega168.lst/hex to controlled files.
(cherry picked from commit c56a1293d7)
2011-10-10 12:11:18 -04:00
WestfW
b2c43c2e55 Allow the READ PARAMETER command to return our version number.
(significant size impact: 14 bytes!)

Initialized "address" to eliminate compiler warning (4 bytes!)

Add "atmega168" as a more accurate target name than "diecimila"
(keep diecimila as well for backward compatibility)

Reduce the .hex and .lst targets that are stored in source control
to the three basics: atmega8, atmega168, atmega328.  The other
targets remain in the makefile and makeall, but will need to be
built from source if wanted.  Which should be less of a problem
now that the source is buildable without installing crosspack.
(cherry picked from commit 7b1ee0f1b0)
2011-10-10 12:11:17 -04:00
WestfW
61e4d16675 Modify Uno "lock" bits in boards.txt to make bootloader readable by
sketches.  Part of http://code.google.com/p/arduino/issues/detail?id=554
(cherry picked from commit 39a496616f)
2011-10-10 12:11:17 -04:00
WestfW
a57d315e4b http://code.google.com/p/arduino/issues/detail?id=368
Optiboot does not support ArduinoasISP programmer.

When avrdude runs and talks to an arduino running ArduinoISP,
it needs the optiboot (entered due to auto-reset) to abort and
start the ArduinoISP "application" when it sees communications
at the wrong serial speed.  Unfortunately, optiboot treats all
unrecognized command characters as "no-ops" and responds/loops
for more commands, leading to a nice loop that never gets to
the sketch.   This patch causes characters received with Framing
errors (the most likely error for speed mis-matches) to NOT
reset the watchdog timer (normally done in getch()), which will
cause the application to start if it continues for "a while."
(tested.  Works!  Running ArduinoISP at speeds as high as 57600
still causes the bootloader to start the sketch (although it fails
later on for other reasons.))
(cherry picked from commit e81c1123b6)
2011-10-10 12:11:16 -04:00
WestfW
1bbded4f34 (make sure .hex and .lst are updated as well.)
(cherry picked from commit ece29c3805)
2011-10-10 12:11:16 -04:00
WestfW
091dc9a7f9 Fix errors in LDSECTIONS refactoring
(found during atmega8 testing.)
(cherry picked from commit 422398e08c)
2011-10-10 12:11:16 -04:00
WestfW
93f7515ecf Update version to reflect previous edit. Sigh.
(cherry picked from commit e28b716f88)
2011-10-10 12:11:15 -04:00
WestfW
07a88dc998 Shrink code by using registers for variables "length" and "address"
http://code.google.com/p/optiboot/issues/detail?id=33

Fix high-value watchdog timeouts on ATmega8
http://code.google.com/p/optiboot/issues/detail?id=38

Change "start app on bad commands" code to start the app via the
watchdog timer, so that the app is always started with the chip
in fully reset state.
http://code.google.com/p/optiboot/issues/detail?id=37
(cherry picked from commit 6f7687b0f9)
2011-10-10 12:11:15 -04:00
WestfW
10019bb0df Add a version number to the optiboot source and binary.
http://code.google.com/p/arduino/issues/detail?id=554

end of flash memory where they can be read (at least in theory) by
device programmers, hex-file examination, or application programs.
This is done by putting the version number in a separate section
(".version"), and using linker/objcopy magic to locate that section as
appropriate for the target chip.  (See
http://lists.gnu.org/archive/html/avr-gcc-list/2011-02/msg00016.html
for some discussion on the details.)

Start the version at 4.1 (the last "packaged" version of optiboot was
called version 3, so the "top of source" would be 4.0, and adding the
version number makes 4.1)

Refactor LDSECTION in the Makefile to LDSECTIONS so that multiple
section start addresses can be defined.

Change the _isp makefile definitions to make the bootloader section
readable (but not writable) by the application section.  (This would
need to be done elsewhere as well to handle all bootloader programming
techniques.  Notably Arduino's boards.txt

Note that this change does not change the "code" portion of optiboot
at all.  The only diffs in the .hex files are the added version word
at the end of flash memory.
(cherry picked from commit 00706284de)
2011-10-10 12:11:15 -04:00
WestfW
287aae6b42 Update shell script makeall
(cherry picked from commit d4632cb095)
2011-10-10 12:11:14 -04:00
WestfW
92e746d0a5 This is a relatively significant edit that brings the Arduino copy of
optiboot up-to-date with the optiboot source repository as of Jun-2011
(the last changes made in the optiboot repository were in Oct-2010)

This adds support for several plaforms, fixes the "30k bug", and
refactors the source to have separate stk500.h, boot.h, and pin_defs.h

These are the arduino opticode issues fixed:
http://code.google.com/p/arduino/issues/detail?id=380
    optiboot has problems upload sketches bigger than 30 KB
http://code.google.com/p/arduino/issues/detail?id=556
    update optiboot to the point of the latest optiboot project sources.

These are issues that had been solved in the optiboot source aready:
http://code.google.com/p/arduino/issues/detail?id=364
   optiboot leaves timer1 configured when starting app, breaks PWM on
   pin 9 and 10.  (fixed with a workaround in arduino core.)
   aka http://code.google.com/p/optiboot/source/detail?r=c778fbe72df6ac13ef730c25283358c3c970f73e
   Support for ATmega8 and mega88.
   Fix fuse settings for mega168 _ISP targets
   Additional new platforms (mega, sanguino)

http://code.google.com/p/optiboot/issues/detail?id=26
   Set R1 to 0  (already in arduino code)
http://code.google.com/p/optiboot/issues/detail?id=36&can=1
   Fails to build correctly for mega88

After this commit, the only differences between the Arduino optiboot.c
and the optiboot repository optiboot.c are cosmetic.
(cherry picked from commit e2812ef91c)
2011-10-10 12:11:14 -04:00
WestfW
72e425a41d http://code.google.com/p/arduino/issues/detail?id=517
Remove the trailing comments when setting fuse values for the various
*_isp targets, so that they won't cause avrdude errors.

This was done the same way as in the optiboot source tree:
http://code.google.com/p/optiboot/issues/detail?id=17
http://code.google.com/p/optiboot/source/detail?r=005fb033fc08c551b2f86f7c90c5db21549b3f20
(cherry picked from commit 6840b77643)
2011-10-10 12:11:14 -04:00
WestfW
11b2d86ff1 Makefile modification to allow building optiboot in more environments.
Allows building within the Arduino Source tree, and within the Arduino
IDE tree, as well as using CrossPack on Mac.

Adds README.TXT to track arduino-specific changes (and documents the
new build options.)

This addresses Arduino issue:

  http://code.google.com/p/arduino/issues/detail?id=487

And optiboot issue

  http://code.google.com/p/optiboot/issues/detail?id=1

(which can be thought of as a subset of the Arduno issue.)

Note that the binaries produced after these Makefile changes (using any
of the compile environments) are identical to those produced by the
crosspack-20100115 environment on a Mac.
(cherry picked from commit 2d2ed324b4)
2011-10-10 12:11:13 -04:00
David A. Mellis
f093cc6970 Merge pull request #30 from WestfW/master
Significant optiboot upgrade.
2011-10-10 09:01:56 -07:00
David A. Mellis
a08657b350 Moving USBasp in programmers menu. 2011-10-10 11:58:38 -04:00
David A. Mellis
2ffad50619 Merge pull request #41 from chiva/patch-1
Added USBasp to programmers list
2011-10-10 08:56:15 -07:00
David A. Mellis
9296f1db31 Fixing bug in Ethernet (recv() in socket.cpp). (Paul Stoffregen)
http://code.google.com/p/arduino/issues/detail?id=670
2011-10-10 11:49:50 -04:00
David A. Mellis
b35e76ab42 Cleaning up Mac OS X ant build script (template.app copying). 2011-10-10 11:49:08 -04:00
David A. Mellis
ca671fdc05 Fixing more warnings (Paul Stoffregen). 2011-10-10 11:28:44 -04:00
WestfW
fc8cacb9a3 Explicitly set the SHELL variable when OS=windows, so that we'll use
the same shell regardless of whether other shells are installed
(different shells have different behavior WRT directory component
separators, so this matters.

http://code.google.com/p/arduino/issues/detail?id=667 )
2011-10-05 01:41:03 -07:00
David A. Mellis
965480f148 Fixing warnings in Ethernet library (Paul Stoffregen).
http://code.google.com/p/arduino/issues/detail?id=208
2011-10-02 10:17:33 -04:00
David A. Mellis
85c109f255 Fixing warnings in Stream (Paul Stoffregen)
http://code.google.com/p/arduino/issues/detail?id=208
2011-10-02 09:44:21 -04:00
David A. Mellis
a2235e3cdc Showing compilation warnings when verbose output is enabled.
http://code.google.com/p/arduino/issues/detail?id=664
2011-10-01 17:05:21 -04:00
David A. Mellis
6554ae653c Using alternate timer 0 overflow interrupt signal name for ATtiny24/44/84. 2011-09-30 11:24:44 -04:00
David A. Mellis
bd823bf201 Changing Ethernet upload protocol from stk500 to arduino.
http://code.google.com/p/arduino/issues/detail?id=649
2011-09-28 23:26:37 -04:00
David A. Mellis
72ac63c892 Fixing same eeprom.h problem on Windows. 2011-09-28 17:23:44 -04:00
David A. Mellis
68fdc3f012 Fixing a bug in Mac eeprom.h (that appears on ATtiny's). 2011-09-28 17:21:59 -04:00
David A. Mellis
d49c8e2c13 Restore .pde sketches too (not just .ino ones).
http://code.google.com/p/arduino/issues/detail?id=652
2011-09-25 10:01:36 -04:00
Tom Igoe
301c1d71d8 Cleaned up wifi library examples
moved old examples to libraries/Wifi/examples/old_examples, to finish
later.  Added five new examples which work in 1.0 beta4
2011-09-16 21:12:38 -04:00
David A. Mellis
479fe85d27 Merge remote-tracking branch 'upstream/new-extension' into new-extension 2011-09-16 20:55:42 -04:00
David A. Mellis
98777c6b87 Updating Mac OS X version to 1.0-rc1. 2011-09-16 20:55:12 -04:00
David A. Mellis
de22990133 Updating bootloader comments. 2011-09-16 20:31:41 -04:00
David A. Mellis
df2270d4d5 Commenting out micro board for now since it's not being released yet. 2011-09-16 20:26:43 -04:00
David A. Mellis
19d7d4b066 Updating Micro bootloader (previous one was identical to Leonardo). 2011-09-16 18:25:59 -04:00
Zach Eveland
d532d85059 added Mouse.isPressed() method 2011-09-16 16:59:14 -04:00
Zach Eveland
00c3631467 made some Keyboard methods private 2011-09-16 16:43:07 -04:00
Zach Eveland
30fc9919e1 added support for TIMER4D used for PWM on Leonardo and Micro D6 2011-09-16 16:36:42 -04:00
Zach Eveland
b898a35f76 new bootloader binaries for Micro and Leonardo - uses new assignment for TXLED pin 2011-09-16 16:24:21 -04:00
Zach Eveland
a4ccf47ec7 updated pin assignment again based on design files for Leonardo 2011-09-16 16:12:39 -04:00
Zach Eveland
23d0d05844 updated pin mappings for bootloader and pins_arduino.h in anticipation of final hardware. 2011-09-16 15:46:51 -04:00
Zach Eveland
8638d5b4e9 restored accidentally-deleted Leonardo type in boards.txt 2011-09-16 14:54:42 -04:00
Zach Eveland
75cfefcd0a restored Micro entry in boards.txt, made separate bootloader images for Leonardo and Micro. 2011-09-16 14:47:42 -04:00
Zach Eveland
cd5ecfff1c Merge https://github.com/arduino/32U4 into new-extension 2011-09-16 14:34:55 -04:00
Zach Eveland
667da698d7 added automatic one-shot TX and RX LED control for sketch USB 2011-09-16 14:32:25 -04:00
David A. Mellis
3cce11312c Merge remote-tracking branch 'upstream/new-extension' into new-extension 2011-09-16 14:27:56 -04:00
David A. Mellis
5ec35fc68c Moving Leonardo after Uno. 2011-09-16 14:24:11 -04:00
David A. Mellis
43fa225724 Dialog and preference about renaming .pde to .ino files on save.
The new extension (.ino) is used by default for all new sketches (whether created with new or save as).  It's possible, however, to control the behavior on save.  The first time you save a sketch with a .pde file, you're prompted to rename it or cancel the save.  There's a preference that allow selecting whether or not .pde files are renamed on save.

http://code.google.com/p/arduino/issues/detail?id=644
2011-09-16 13:30:50 -04:00
David A. Mellis
a398aaffe5 Merge branch 'new-extension' of github.com:arduino/Arduino into new-extension 2011-09-16 12:46:29 -04:00