/*
  SD card basic file example
 
 This example shows how to create and destroy an SD card file 	
 The circuit:
 * SD card attached to SPI bus as follows:
 ** MOSI - pin 11
 ** MISO - pin 12
 ** CLK - pin 13
 ** CS - pin 4
 
 created   Nov 2010
 by David A. Mellis
 updated 2 Dec 2010
 by Tom Igoe
 
 This example code is in the public domain.
 	 
 */
#include <SD.h>

File myFile;

void setup()
{
  Serial.begin(9600);
  Serial.print("Initializing SD card...");
  // On the Ethernet Shield, CS is pin 4. It's set as an output by default.
  // Note that even if it's not used as the CS pin, the hardware SS pin 
  // (10 on most Arduino boards, 53 on the Mega) must be left as an output 
  // or the SD library functions will not work. 

  if (!SD.begin(4)) {
    Serial.println("initialization failed!");
    return;
  }
  Serial.println("initialization done.");
    
  if (SD.exists("example.txt")) {
  	Serial.println("example.txt exists.");
  }
  else {
  	Serial.println("example.txt doesn't exist.");
  }
  
  // open a new file and immediately close it:
  Serial.println("Creating example.txt...");
 myFile = SD.open("example.txt", FILE_TRUNCATE);
 myFile.close();
  
  // Check to see if the file exists: 
  if (SD.exists("example.txt")) {
  	Serial.println("example.txt exists.");
  }
  else {
  	Serial.println("example.txt doesn't exist.");  
  }
  
  // delete the file:
  Serial.println("Removing example.txt...");
  SD.remove("example.txt");

  if (SD.exists("example.txt")){ 
  	Serial.println("example.txt exists.");
  }
  else {
  	Serial.println("example.txt doesn't exist.");  
  }
}

void loop()
{
	// nothing happens after setup finishes.
}