# Arduino Makefile (for Windows XP) # Nick Zambetti and David A. Mellis # $Id: makefile.win,v 1.9 2005/05/23 18:21:46 mellis Exp $ # By default, this makefile uses the serial device specified by # Wiring (either in the Tools | Serial Port menu or the Wiring # preferences file in the sketchbook directory) and passed as # an argument to make. To override this value, uncomment the # following line and change the value to the desired device. # SERIAL=com1 # The Wiring Lite IDE runs the "compile" rule when you click the play button. compile: -bin/rm tmp/* bin/cat include/wiringlite.inc > tmp/prog.c bin/cat ../build/*.c >> tmp/prog.c bin/cp include/* tmp bin/cp ../../cyg*.dll tmp bin/gnumake -s -C tmp # The IDE runs the "program" rule when you hit the export button. # The string after the colon determines the method used to # program the microcontroller: program-using-bootloader, # program-with-isp, or program-over-parallel-port. program: program-using-bootloader-avrdude # This rule is for uploading code using a bootloader already on # the microcontroller. It should run at the baud rate specified # in the bootloader's code, current 9600 baud. program-using-bootloader-avrdude: bin/avrdude -p atmega8 -P ${SERIAL} -c stk500@9600 -V -U flash:w:tmp/prog.hex # This rule is for uploading code using a bootloader already on # the microcontroller. It should run at the baud rate specified # in the bootloader's code, current 9600 baud. On Windows, use # program-using-bootloader-avrdude instead, as uisp seems to have # problems talking to the bootloader over the serial port (though # it appears to work fine with a Keyspan USB-to-serial adapter). program-using-bootloader: cp ../../cyg*.dll . bin/uisp -dprog=stk500 -dspeed=9600 -dserial=${SERIAL} -dpart=ATmega8 if=tmp/prog.hex --upload # This rule is for uploading code using an in-system programmer, # e.g. the one sold by Atmel. In this case, you want to erase the # microcontroller, upload the code, and then verify it. # Atmel's isp follows the stk500 protocol and works at 115200 baud. program-with-isp: cp ../../cyg*.dll . bin/uisp -dprog=stk500 -dspeed=115200 -dserial=${SERIAL} -dpart=ATmega8 if=tmp/prog.hex --erase --upload --verify # This rule is for uploading code using a parallel port programmer. program-over-parallel-port: cp ../../cyg*.dll . bin/uisp -dprog=dapa -dpart=ATmega8 if=tmp/prog.hex -dlpt=0x378 --erase --upload