/* %ATMEL_LICENCE% */ #ifndef _SAM3U4E_ #define _SAM3U4E_ /** \addtogroup SAM3U4E_definitions SAM3U4E definitions This file defines all structures and symbols for SAM3U4E: - registers and bitfields - peripheral base address - peripheral ID - PIO definitions */ /*@{*/ #ifdef __cplusplus extern "C" { #endif #ifndef __ASSEMBLY__ #include #ifndef __cplusplus typedef volatile const uint32_t RoReg; /**< Read only 32-bit register (volatile const unsigned int) */ #else typedef volatile uint32_t RoReg; /**< Read only 32-bit register (volatile const unsigned int) */ #endif typedef volatile uint32_t WoReg; /**< Write only 32-bit register (volatile unsigned int) */ typedef volatile uint32_t RwReg; /**< Read-Write 32-bit register (volatile unsigned int) */ #define CAST(type, value) (((type)*)(value)) #define REG_ACCESS(type, address) (*((type)*)(address)) /**< C code: Register value */ #else #define CAST(type, value) (value) #define REG_ACCESS(type, address) (address) /**< Assembly code: Register address */ #endif /* ************************************************************************** */ /* CMSIS DEFINITIONS FOR SAM3U4E */ /* ************************************************************************** */ /** \addtogroup SAM3U4E_cmsis CMSIS Definitions */ /*@{*/ /**< Interrupt Number Definition */ typedef enum IRQn { /****** Cortex-M3 Processor Exceptions Numbers ******************************/ NonMaskableInt_IRQn = -14, /**< 2 Non Maskable Interrupt */ MemoryManagement_IRQn = -12, /**< 4 Cortex-M3 Memory Management Interrupt */ BusFault_IRQn = -11, /**< 5 Cortex-M3 Bus Fault Interrupt */ UsageFault_IRQn = -10, /**< 6 Cortex-M3 Usage Fault Interrupt */ SVCall_IRQn = -5, /**< 11 Cortex-M3 SV Call Interrupt */ DebugMonitor_IRQn = -4, /**< 12 Cortex-M3 Debug Monitor Interrupt */ PendSV_IRQn = -2, /**< 14 Cortex-M3 Pend SV Interrupt */ SysTick_IRQn = -1, /**< 15 Cortex-M3 System Tick Interrupt */ /****** SAM3U4E specific Interrupt Numbers *********************************/ SUPC_IRQn = 0, /**< 0 SAM3U4E Supply Controller (SUPC) */ RSTC_IRQn = 1, /**< 1 SAM3U4E Reset Controller (RSTC) */ RTC_IRQn = 2, /**< 2 SAM3U4E Real Time Clock (RTC) */ RTT_IRQn = 3, /**< 3 SAM3U4E Real Time Timer (RTT) */ WDT_IRQn = 4, /**< 4 SAM3U4E Watchdog Timer (WDT) */ PMC_IRQn = 5, /**< 5 SAM3U4E Power Management Controller (PMC) */ EFC0_IRQn = 6, /**< 6 SAM3U4E Enhanced Embedded Flash Controller 0 (EFC0) */ EFC1_IRQn = 7, /**< 7 SAM3U4E Enhanced Embedded Flash Controller 1 (EFC1) */ UART_IRQn = 8, /**< 8 SAM3U4E Universal Asynchronous Receiver Transmitter (UART) */ SMC_IRQn = 9, /**< 9 SAM3U4E Static Memory Controller (SMC) */ PIOA_IRQn = 10, /**< 10 SAM3U4E Parallel I/O Controller A, (PIOA) */ PIOB_IRQn = 11, /**< 11 SAM3U4E Parallel I/O Controller B (PIOB) */ PIOC_IRQn = 12, /**< 12 SAM3U4E Parallel I/O Controller C (PIOC) */ USART0_IRQn = 13, /**< 13 SAM3U4E USART 0 (USART0) */ USART1_IRQn = 14, /**< 14 SAM3U4E USART 1 (USART1) */ USART2_IRQn = 15, /**< 15 SAM3U4E USART 2 (USART2) */ USART3_IRQn = 16, /**< 16 SAM3U4E USART 3 (USART3) */ HSMCI_IRQn = 17, /**< 17 SAM3U4E High Speed Multimedia Card Interface (HSMCI) */ TWI0_IRQn = 18, /**< 18 SAM3U4E Two-Wire Interface 0 (TWI0) */ TWI1_IRQn = 19, /**< 19 SAM3U4E Two-Wire Interface 1 (TWI1) */ SPI_IRQn = 20, /**< 20 SAM3U4E Serial Peripheral Interface (SPI) */ SSC_IRQn = 21, /**< 21 SAM3U4E Synchronous Serial Controller (SSC) */ TC0_IRQn = 22, /**< 22 SAM3U4E Timer Counter 0 (TC0) */ TC1_IRQn = 23, /**< 23 SAM3U4E Timer Counter 1 (TC1) */ TC2_IRQn = 24, /**< 24 SAM3U4E Timer Counter 2 (TC2) */ PWM_IRQn = 25, /**< 25 SAM3U4E Pulse Width Modulation Controller (PWM) */ ADC12B_IRQn = 26, /**< 26 SAM3U4E 12-bit ADC Controller (ADC12B) */ ADC_IRQn = 27, /**< 27 SAM3U4E 10-bit ADC Controller (ADC) */ DMAC_IRQn = 28, /**< 28 SAM3U4E DMA Controller (DMAC) */ UDPHS_IRQn = 29 /**< 29 SAM3U4E USB Device High Speed (UDPHS) */ } IRQn_Type; /** * \brief Configuration of the Cortex-M3 Processor and Core Peripherals */ #define __MPU_PRESENT 1 /**< SAM3U4E does provide a MPU */ #define __NVIC_PRIO_BITS 4 /**< SAM3U4E uses 4 Bits for the Priority Levels */ #define __Vendor_SysTickConfig 0 /**< Set to 1 if different SysTick Config is used */ /* * \brief CMSIS includes */ #include /*@}*/ /* ************************************************************************** */ /** SOFTWARE PERIPHERAL API DEFINITION FOR SAM3U4E */ /* ************************************************************************** */ /** \addtogroup SAM3U4E_api Peripheral Software API */ /*@{*/ #include "component/ADC.h" #include "component/ADC12B.h" #include "component/CHIPID.h" #include "component/DMAC.h" #include "component/EFC.h" #include "component/GPBR.h" #include "component/HSMCI.h" #include "component/MATRIX.h" #include "component/PDC.h" #include "component/PIO.h" #include "component/PMC.h" #include "component/PWM.h" #include "component/RSTC.h" #include "component/RTC.h" #include "component/RTT.h" #include "component/SMC.h" #include "component/SPI.h" #include "component/SSC.h" #include "component/SUPC.h" #include "component/TC.h" #include "component/TWI.h" #include "component/UART.h" #include "component/UDPHS.h" #include "component/USART.h" #include "component/WDT.h" /*@}*/ /* ************************************************************************** */ /* REGISTER ACCESS DEFINITIONS FOR SAM3U4E */ /* ************************************************************************** */ /** \addtogroup SAM3U4E_reg Registers Access Definitions */ /*@{*/ #include "instance/HSMCI.h" #include "instance/SSC.h" #include "instance/SPI.h" #include "instance/TC0.h" #include "instance/TWI0.h" #include "instance/TWI1.h" #include "instance/PWM.h" #include "instance/USART0.h" #include "instance/USART1.h" #include "instance/USART2.h" #include "instance/USART3.h" #include "instance/UDPHS.h" #include "instance/ADC12B.h" #include "instance/ADC.h" #include "instance/DMAC.h" #include "instance/SMC.h" #include "instance/MATRIX.h" #include "instance/PMC.h" #include "instance/UART.h" #include "instance/CHIPID.h" #include "instance/EFC0.h" #include "instance/EFC1.h" #include "instance/PIOA.h" #include "instance/PIOB.h" #include "instance/PIOC.h" #include "instance/RSTC.h" #include "instance/SUPC.h" #include "instance/RTT.h" #include "instance/WDT.h" #include "instance/RTC.h" #include "instance/GPBR.h" /*@}*/ /* ************************************************************************** */ /* PERIPHERAL ID DEFINITIONS FOR SAM3U4E */ /* ************************************************************************** */ /** \addtogroup SAM3U4E_id Peripheral Ids Definitions */ /*@{*/ #define ID_SUPC ( 0) /**< \brief Supply Controller (SUPC) */ #define ID_RSTC ( 1) /**< \brief Reset Controller (RSTC) */ #define ID_RTC ( 2) /**< \brief Real Time Clock (RTC) */ #define ID_RTT ( 3) /**< \brief Real Time Timer (RTT) */ #define ID_WDT ( 4) /**< \brief Watchdog Timer (WDT) */ #define ID_PMC ( 5) /**< \brief Power Management Controller (PMC) */ #define ID_EFC0 ( 6) /**< \brief Enhanced Embedded Flash Controller 0 (EFC0) */ #define ID_EFC1 ( 7) /**< \brief Enhanced Embedded Flash Controller 1 (EFC1) */ #define ID_UART ( 8) /**< \brief Universal Asynchronous Receiver Transmitter (UART) */ #define ID_SMC ( 9) /**< \brief Static Memory Controller (SMC) */ #define ID_PIOA (10) /**< \brief Parallel I/O Controller A, (PIOA) */ #define ID_PIOB (11) /**< \brief Parallel I/O Controller B (PIOB) */ #define ID_PIOC (12) /**< \brief Parallel I/O Controller C (PIOC) */ #define ID_USART0 (13) /**< \brief USART 0 (USART0) */ #define ID_USART1 (14) /**< \brief USART 1 (USART1) */ #define ID_USART2 (15) /**< \brief USART 2 (USART2) */ #define ID_USART3 (16) /**< \brief USART 3 (USART3) */ #define ID_HSMCI (17) /**< \brief High Speed Multimedia Card Interface (HSMCI) */ #define ID_TWI0 (18) /**< \brief Two-Wire Interface 0 (TWI0) */ #define ID_TWI1 (19) /**< \brief Two-Wire Interface 1 (TWI1) */ #define ID_SPI (20) /**< \brief Serial Peripheral Interface (SPI) */ #define ID_SSC (21) /**< \brief Synchronous Serial Controller (SSC) */ #define ID_TC0 (22) /**< \brief Timer Counter 0 (TC0) */ #define ID_TC1 (23) /**< \brief Timer Counter 1 (TC1) */ #define ID_TC2 (24) /**< \brief Timer Counter 2 (TC2) */ #define ID_PWM (25) /**< \brief Pulse Width Modulation Controller (PWM) */ #define ID_ADC12B (26) /**< \brief 12-bit ADC Controller (ADC12B) */ #define ID_ADC (27) /**< \brief 10-bit ADC Controller (ADC) */ #define ID_DMAC (28) /**< \brief DMA Controller (DMAC) */ #define ID_UDPHS (29) /**< \brief USB Device High Speed (UDPHS) */ /*@}*/ /* ************************************************************************** */ /* BASE ADDRESS DEFINITIONS FOR SAM3U4E */ /* ************************************************************************** */ /** \addtogroup SAM3U4E_base Peripheral Base Address Definitions */ /*@{*/ #define HSMCI CAST(Hsmci , 0x40000000U) /**< \brief (HSMCI ) Base Address */ #define SSC CAST(Ssc , 0x40004000U) /**< \brief (SSC ) Base Address */ #define SPI CAST(Spi , 0x40008000U) /**< \brief (SPI ) Base Address */ #define TC0 CAST(Tc , 0x40080000U) /**< \brief (TC0 ) Base Address */ #define TWI0 CAST(Twi , 0x40084000U) /**< \brief (TWI0 ) Base Address */ #define PDC_TWI0 CAST(Pdc , 0x40084100U) /**< \brief (PDC_TWI0 ) Base Address */ #define TWI1 CAST(Twi , 0x40088000U) /**< \brief (TWI1 ) Base Address */ #define PDC_TWI1 CAST(Pdc , 0x40088100U) /**< \brief (PDC_TWI1 ) Base Address */ #define PWM CAST(Pwm , 0x4008C000U) /**< \brief (PWM ) Base Address */ #define PDC_PWM CAST(Pdc , 0x4008C100U) /**< \brief (PDC_PWM ) Base Address */ #define USART0 CAST(Usart , 0x40090000U) /**< \brief (USART0 ) Base Address */ #define PDC_USART0 CAST(Pdc , 0x40090100U) /**< \brief (PDC_USART0) Base Address */ #define USART1 CAST(Usart , 0x40094000U) /**< \brief (USART1 ) Base Address */ #define PDC_USART1 CAST(Pdc , 0x40094100U) /**< \brief (PDC_USART1) Base Address */ #define USART2 CAST(Usart , 0x40098000U) /**< \brief (USART2 ) Base Address */ #define PDC_USART2 CAST(Pdc , 0x40098100U) /**< \brief (PDC_USART2) Base Address */ #define USART3 CAST(Usart , 0x4009C000U) /**< \brief (USART3 ) Base Address */ #define PDC_USART3 CAST(Pdc , 0x4009C100U) /**< \brief (PDC_USART3) Base Address */ #define UDPHS CAST(Udphs , 0x400A4000U) /**< \brief (UDPHS ) Base Address */ #define ADC12B CAST(Adc12b , 0x400A8000U) /**< \brief (ADC12B ) Base Address */ #define PDC_ADC12B CAST(Pdc , 0x400A8100U) /**< \brief (PDC_ADC12B) Base Address */ #define ADC CAST(Adc , 0x400AC000U) /**< \brief (ADC ) Base Address */ #define PDC_ADC CAST(Pdc , 0x400AC100U) /**< \brief (PDC_ADC ) Base Address */ #define DMAC CAST(Dmac , 0x400B0000U) /**< \brief (DMAC ) Base Address */ #define SMC CAST(Smc , 0x400E0000U) /**< \brief (SMC ) Base Address */ #define MATRIX CAST(Matrix , 0x400E0200U) /**< \brief (MATRIX ) Base Address */ #define PMC CAST(Pmc , 0x400E0400U) /**< \brief (PMC ) Base Address */ #define UART CAST(Uart , 0x400E0600U) /**< \brief (UART ) Base Address */ #define PDC_UART CAST(Pdc , 0x400E0700U) /**< \brief (PDC_UART ) Base Address */ #define CHIPID CAST(Chipid , 0x400E0740U) /**< \brief (CHIPID ) Base Address */ #define EFC0 CAST(Efc , 0x400E0800U) /**< \brief (EFC0 ) Base Address */ #define EFC1 CAST(Efc , 0x400E0A00U) /**< \brief (EFC1 ) Base Address */ #define PIOA CAST(Pio , 0x400E0C00U) /**< \brief (PIOA ) Base Address */ #define PIOB CAST(Pio , 0x400E0E00U) /**< \brief (PIOB ) Base Address */ #define PIOC CAST(Pio , 0x400E1000U) /**< \brief (PIOC ) Base Address */ #define RSTC CAST(Rstc , 0x400E1200U) /**< \brief (RSTC ) Base Address */ #define SUPC CAST(Supc , 0x400E1210U) /**< \brief (SUPC ) Base Address */ #define RTT CAST(Rtt , 0x400E1230U) /**< \brief (RTT ) Base Address */ #define WDT CAST(Wdt , 0x400E1250U) /**< \brief (WDT ) Base Address */ #define RTC CAST(Rtc , 0x400E1260U) /**< \brief (RTC ) Base Address */ #define GPBR CAST(Gpbr , 0x400E1290U) /**< \brief (GPBR ) Base Address */ /*@}*/ /* ************************************************************************** */ /* PIO DEFINITIONS FOR SAM3U4E */ /* ************************************************************************** */ /** \addtogroup SAM3U4E_pio Peripheral Pio Definitions */ /*@{*/ #include "pio/SAM3U4E.h" /*@}*/ /* ************************************************************************** */ /* MEMORY MAPPING DEFINITIONS FOR SAM3U4E */ /* ************************************************************************** */ #define IFLASH0_SIZE 0x20000 #define IFLASH0_PAGE_SIZE 256 #define IFLASH0_LOCK_REGION_SIZE 8192 #define IFLASH0_NB_OF_PAGES 64 #define IFLASH1_SIZE 0x20000 #define IFLASH1_PAGE_SIZE 256 #define IFLASH1_LOCK_REGION_SIZE 8192 #define IFLASH1_NB_OF_PAGES 64 #define IRAM_SIZE 0xD000 #define IFLASH_SIZE 0x40000 #define IFLASH0_ADDR (0x00080000u) /**< Internal Flash 0 base address */ #if defined IFLASH0_SIZE #define IFLASH1_ADDR (IFLASH0_ADDR+IFLASH0_SIZE) /**< Internal Flash 1 base address */ #endif #define IROM_ADDR (0x00180000u) /**< Internal ROM base address */ #define IRAM0_ADDR (0x20000000u) /**< Internal RAM 0 base address */ #define IRAM1_ADDR (0x20080000u) /**< Internal RAM 1 base address */ #define NFC_RAM_ADDR (0x20100000u) /**< NAND Flash Controller RAM base address */ #define UDPHS_RAM_ADDR (0x20180000u) /**< USB High Speed Device Port RAM base address */ #ifdef __cplusplus } #endif /*@}*/ #endif /* _SAM3U4E_ */