/* ---------------------------------------------------------------------------- * SAM Software Package License * ---------------------------------------------------------------------------- * Copyright (c) 2011-2012, Atmel Corporation * * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following condition is met: * * - Redistributions of source code must retain the above copyright notice, * this list of conditions and the disclaimer below. * * Atmel's name may not be used to endorse or promote products derived from * this software without specific prior written permission. * * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ---------------------------------------------------------------------------- */ /** * \file * * \par Purpose * * Interface for configuration the Pulse Width Modulation Controller (PWM) peripheral. * * \par Usage * * -# Configures PWM clocks A & B to run at the given frequencies using * \ref PWMC_ConfigureClocks(). * -# Configure PWMC channel using \ref PWMC_ConfigureChannel(), \ref PWMC_ConfigureChannelExt() * \ref PWMC_SetPeriod(), \ref PWMC_SetDutyCycle() and \ref PWMC_SetDeadTime(). * -# Enable & disable channel using \ref PWMC_EnableChannel() and * \ref PWMC_DisableChannel(). * -# Enable & disable the period interrupt for the given PWM channel using * \ref PWMC_EnableChannelIt() and \ref PWMC_DisableChannelIt(). * -# Enable & disable the selected interrupts sources on a PWMC peripheral * using \ref PWMC_EnableIt() and \ref PWMC_DisableIt(). * -# Control syncronous channel using \ref PWMC_ConfigureSyncChannel(), * \ref PWMC_SetSyncChannelUpdatePeriod() and \ref PWMC_SetSyncChannelUpdateUnlock(). * -# Control PWM override output using \ref PWMC_SetOverrideValue(), * \ref PWMC_EnableOverrideOutput() and \ref PWMC_DisableOverrideOutput(). * -# Send data through the transmitter using \ref PWMC_WriteBuffer(). * */ #ifndef _PWMC_ #define _PWMC_ /*---------------------------------------------------------------------------- * Headers *----------------------------------------------------------------------------*/ #include "../chip.h" #include #ifdef __cplusplus extern "C" { #endif /*---------------------------------------------------------------------------- * Exported functions *----------------------------------------------------------------------------*/ extern void PWMC_ConfigureChannel( Pwm* pPwm, uint32_t ul_channel, uint32_t prescaler, uint32_t alignment, uint32_t polarity ) ; extern void PWMC_ConfigureChannelExt( Pwm* pPwm, uint32_t ul_channel, uint32_t prescaler, uint32_t alignment, uint32_t polarity, uint32_t countEventSelect, uint32_t DTEnable, uint32_t DTHInverte, uint32_t DTLInverte ) ; extern void PWMC_ConfigureClocks(uint32_t clka, uint32_t clkb, uint32_t mck ) ; extern void PWMC_SetPeriod( Pwm* pPwm, uint32_t ul_channel, uint16_t period ) ; extern void PWMC_SetDutyCycle( Pwm* pPwm, uint32_t ul_channel, uint16_t duty ) ; extern void PWMC_SetDeadTime( Pwm* pPwm, uint32_t ul_channel, uint16_t timeH, uint16_t timeL ) ; extern void PWMC_ConfigureSyncChannel( Pwm* pPwm, uint32_t ul_channels, uint32_t updateMode, uint32_t requestMode, uint32_t requestComparisonSelect ) ; extern void PWMC_SetSyncChannelUpdatePeriod( Pwm* pPwm, uint8_t period ) ; extern void PWMC_SetSyncChannelUpdateUnlock( Pwm* pPwm ) ; extern void PWMC_EnableChannel( Pwm* pPwm, uint32_t ul_channel ) ; extern void PWMC_DisableChannel( Pwm* pPwm, uint32_t ul_channel ) ; extern void PWMC_EnableChannelIt( Pwm* pPwm, uint32_t ul_channel ) ; extern void PWMC_DisableChannelIt( Pwm* pPwm, uint32_t ul_channel ) ; extern void PWMC_EnableIt( Pwm* pPwm, uint32_t sources1, uint32_t sources2 ) ; extern void PWMC_DisableIt( Pwm* pPwm, uint32_t sources1, uint32_t sources2 ) ; extern uint8_t PWMC_WriteBuffer(Pwm *pwmc, void *buffer, uint32_t length ) ; extern void PWMC_SetOverrideValue( Pwm* pPwm, uint32_t value ) ; extern void PWMC_EnableOverrideOutput( Pwm* pPwm, uint32_t value, uint32_t sync ) ; extern void PWMC_DisableOverrideOutput( Pwm* pPwm, uint32_t value, uint32_t sync ) ; extern void PWMC_SetFaultMode( Pwm* pPwm, uint32_t mode ) ; extern void PWMC_FaultClear( Pwm* pPwm, uint32_t fault ) ; extern void PWMC_SetFaultProtectionValue( Pwm* pPwm, uint32_t value ) ; extern void PWMC_EnableFaultProtection( Pwm* pPwm, uint32_t ul_channel, uint32_t value ) ; extern void PWMC_ConfigureComparisonUnit( Pwm* pPwm, uint32_t x, uint32_t value, uint32_t mode ) ; extern void PWMC_ConfigureEventLineMode( Pwm* pPwm, uint32_t x, uint32_t mode ) ; #ifdef __cplusplus } #endif #endif /* #ifndef _PWMC_ */