mirror of
https://github.com/arduino/Arduino.git
synced 2024-12-12 23:08:52 +01:00
98 lines
6.4 KiB
C
98 lines
6.4 KiB
C
/* %ATMEL_LICENCE% */
|
|
|
|
#ifndef _SAM3S_ACC_COMPONENT_
|
|
#define _SAM3S_ACC_COMPONENT_
|
|
|
|
/* ============================================================================= */
|
|
/** SOFTWARE API DEFINITION FOR Analog Comparator Controller */
|
|
/* ============================================================================= */
|
|
/** \addtogroup SAM3S_ACC Analog Comparator Controller */
|
|
/*@{*/
|
|
|
|
#ifndef __ASSEMBLY__
|
|
/** \brief Acc hardware registers */
|
|
typedef struct {
|
|
WoReg ACC_CR; /**< \brief (Acc Offset: 0x00) Control Register */
|
|
RwReg ACC_MR; /**< \brief (Acc Offset: 0x04) Mode Register */
|
|
RoReg Reserved1[7];
|
|
WoReg ACC_IER; /**< \brief (Acc Offset: 0x24) Interrupt Enable Register */
|
|
WoReg ACC_IDR; /**< \brief (Acc Offset: 0x28) Interrupt Disable Register */
|
|
RoReg ACC_IMR; /**< \brief (Acc Offset: 0x2C) Interrupt Mask Register */
|
|
RoReg ACC_ISR; /**< \brief (Acc Offset: 0x30) Interrupt Status Register */
|
|
RoReg Reserved2[24];
|
|
RwReg ACC_ACR; /**< \brief (Acc Offset: 0x94) Analog Control Register */
|
|
RoReg Reserved3[19];
|
|
RwReg ACC_WPMR; /**< \brief (Acc Offset: 0xE4) Write Protect Mode Register */
|
|
RoReg ACC_WPSR; /**< \brief (Acc Offset: 0xE8) Write Protect Status Register */
|
|
} Acc;
|
|
#endif /* __ASSEMBLY__ */
|
|
/* -------- ACC_CR : (ACC Offset: 0x00) Control Register -------- */
|
|
#define ACC_CR_SWRST (0x1u << 0) /**< \brief (ACC_CR) SoftWare ReSeT */
|
|
/* -------- ACC_MR : (ACC Offset: 0x04) Mode Register -------- */
|
|
#define ACC_MR_SELMINUS_Pos 0
|
|
#define ACC_MR_SELMINUS_Msk (0x7u << ACC_MR_SELMINUS_Pos) /**< \brief (ACC_MR) SELection for MINUS comparator input */
|
|
#define ACC_MR_SELMINUS_TS (0x0u << 0) /**< \brief (ACC_MR) SelectTS */
|
|
#define ACC_MR_SELMINUS_ADVREF (0x1u << 0) /**< \brief (ACC_MR) Select ADVREF */
|
|
#define ACC_MR_SELMINUS_DAC0 (0x2u << 0) /**< \brief (ACC_MR) Select DAC0 */
|
|
#define ACC_MR_SELMINUS_DAC1 (0x3u << 0) /**< \brief (ACC_MR) Select DAC1 */
|
|
#define ACC_MR_SELMINUS_AD0 (0x4u << 0) /**< \brief (ACC_MR) Select AD0 */
|
|
#define ACC_MR_SELMINUS_AD1 (0x5u << 0) /**< \brief (ACC_MR) Select AD1 */
|
|
#define ACC_MR_SELMINUS_AD2 (0x6u << 0) /**< \brief (ACC_MR) Select AD2 */
|
|
#define ACC_MR_SELMINUS_AD3 (0x7u << 0) /**< \brief (ACC_MR) Select AD3 */
|
|
#define ACC_MR_SELPLUS_Pos 4
|
|
#define ACC_MR_SELPLUS_Msk (0x7u << ACC_MR_SELPLUS_Pos) /**< \brief (ACC_MR) SELection for PLUS comparator input */
|
|
#define ACC_MR_SELPLUS_AD0 (0x0u << 4) /**< \brief (ACC_MR) Select AD0 */
|
|
#define ACC_MR_SELPLUS_AD1 (0x1u << 4) /**< \brief (ACC_MR) Select AD1 */
|
|
#define ACC_MR_SELPLUS_AD2 (0x2u << 4) /**< \brief (ACC_MR) Select AD2 */
|
|
#define ACC_MR_SELPLUS_AD3 (0x3u << 4) /**< \brief (ACC_MR) Select AD3 */
|
|
#define ACC_MR_SELPLUS_AD4 (0x4u << 4) /**< \brief (ACC_MR) Select AD4 */
|
|
#define ACC_MR_SELPLUS_AD5 (0x5u << 4) /**< \brief (ACC_MR) Select AD5 */
|
|
#define ACC_MR_SELPLUS_AD6 (0x6u << 4) /**< \brief (ACC_MR) Select AD6 */
|
|
#define ACC_MR_SELPLUS_AD7 (0x7u << 4) /**< \brief (ACC_MR) Select AD7 */
|
|
#define ACC_MR_ACEN (0x1u << 8) /**< \brief (ACC_MR) Analog Comparator ENable */
|
|
#define ACC_MR_ACEN_DIS (0x0u << 8) /**< \brief (ACC_MR) Analog Comparator Disabled. */
|
|
#define ACC_MR_ACEN_EN (0x1u << 8) /**< \brief (ACC_MR) Analog Comparator Enabled. */
|
|
#define ACC_MR_EDGETYP_Pos 9
|
|
#define ACC_MR_EDGETYP_Msk (0x3u << ACC_MR_EDGETYP_Pos) /**< \brief (ACC_MR) EDGE TYPe */
|
|
#define ACC_MR_EDGETYP_RISING (0x0u << 9) /**< \brief (ACC_MR) only rising edge of comparator output */
|
|
#define ACC_MR_EDGETYP_FALLING (0x1u << 9) /**< \brief (ACC_MR) falling edge of comparator output */
|
|
#define ACC_MR_EDGETYP_ANY (0x2u << 9) /**< \brief (ACC_MR) any edge of comparator output */
|
|
#define ACC_MR_INV (0x1u << 12) /**< \brief (ACC_MR) INVert comparator output */
|
|
#define ACC_MR_INV_DIS (0x0u << 12) /**< \brief (ACC_MR) Analog Comparator output is directly processed. */
|
|
#define ACC_MR_INV_EN (0x1u << 12) /**< \brief (ACC_MR) Analog Comparator output is inverted prior to being processed. */
|
|
#define ACC_MR_SELFS (0x1u << 13) /**< \brief (ACC_MR) SELection of Fault Source */
|
|
#define ACC_MR_SELFS_CF (0x0u << 13) /**< \brief (ACC_MR) the CF flag is used to drive the FAULT output. */
|
|
#define ACC_MR_SELFS_OUTPUT (0x1u << 13) /**< \brief (ACC_MR) the output of the Analog Comparator flag is used to drive the FAULT output. */
|
|
#define ACC_MR_FE (0x1u << 14) /**< \brief (ACC_MR) Fault Enable */
|
|
#define ACC_MR_FE_DIS (0x0u << 14) /**< \brief (ACC_MR) the FAULT output is tied to 0. */
|
|
#define ACC_MR_FE_EN (0x1u << 14) /**< \brief (ACC_MR) the FAULT output is driven by the signal defined by SELFS. */
|
|
/* -------- ACC_IER : (ACC Offset: 0x24) Interrupt Enable Register -------- */
|
|
#define ACC_IER_CE (0x1u << 0) /**< \brief (ACC_IER) Comparison Edge */
|
|
/* -------- ACC_IDR : (ACC Offset: 0x28) Interrupt Disable Register -------- */
|
|
#define ACC_IDR_CE (0x1u << 0) /**< \brief (ACC_IDR) Comparison Edge */
|
|
/* -------- ACC_IMR : (ACC Offset: 0x2C) Interrupt Mask Register -------- */
|
|
#define ACC_IMR_CE (0x1u << 0) /**< \brief (ACC_IMR) Comparison Edge */
|
|
/* -------- ACC_ISR : (ACC Offset: 0x30) Interrupt Status Register -------- */
|
|
#define ACC_ISR_CE (0x1u << 0) /**< \brief (ACC_ISR) Comparison Edge */
|
|
#define ACC_ISR_SCO (0x1u << 1) /**< \brief (ACC_ISR) Synchronized Comparator Output */
|
|
#define ACC_ISR_MASK (0x1u << 31) /**< \brief (ACC_ISR) */
|
|
/* -------- ACC_ACR : (ACC Offset: 0x94) Analog Control Register -------- */
|
|
#define ACC_ACR_ISEL (0x1u << 0) /**< \brief (ACC_ACR) Current SELection */
|
|
#define ACC_ACR_ISEL_LOPW (0x0u << 0) /**< \brief (ACC_ACR) low power option. */
|
|
#define ACC_ACR_ISEL_HISP (0x1u << 0) /**< \brief (ACC_ACR) high speed option. */
|
|
#define ACC_ACR_HYST_Pos 1
|
|
#define ACC_ACR_HYST_Msk (0x3u << ACC_ACR_HYST_Pos) /**< \brief (ACC_ACR) HYSTeresis selection */
|
|
#define ACC_ACR_HYST(value) ((ACC_ACR_HYST_Msk & ((value) << ACC_ACR_HYST_Pos)))
|
|
/* -------- ACC_WPMR : (ACC Offset: 0xE4) Write Protect Mode Register -------- */
|
|
#define ACC_WPMR_WPEN (0x1u << 0) /**< \brief (ACC_WPMR) Write Protect Enable */
|
|
#define ACC_WPMR_WPKEY_Pos 8
|
|
#define ACC_WPMR_WPKEY_Msk (0xffffffu << ACC_WPMR_WPKEY_Pos) /**< \brief (ACC_WPMR) Write Protect KEY */
|
|
#define ACC_WPMR_WPKEY(value) ((ACC_WPMR_WPKEY_Msk & ((value) << ACC_WPMR_WPKEY_Pos)))
|
|
/* -------- ACC_WPSR : (ACC Offset: 0xE8) Write Protect Status Register -------- */
|
|
#define ACC_WPSR_WPROTERR (0x1u << 0) /**< \brief (ACC_WPSR) Write PROTection ERRor */
|
|
|
|
/*@}*/
|
|
|
|
|
|
#endif /* _SAM3S_ACC_COMPONENT_ */
|