mirror of
https://github.com/arduino/Arduino.git
synced 2024-12-04 15:24:12 +01:00
353 lines
10 KiB
C
353 lines
10 KiB
C
/* ----------------------------------------------------------------------------
|
|
* SAM Software Package License
|
|
* ----------------------------------------------------------------------------
|
|
* Copyright (c) 2011, Atmel Corporation
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
*
|
|
* - Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the disclaimer below.
|
|
*
|
|
* Atmel's name may not be used to endorse or promote products derived from
|
|
* this software without specific prior written permission.
|
|
*
|
|
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
|
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
|
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
|
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
|
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
* ----------------------------------------------------------------------------
|
|
*/
|
|
|
|
/** \addtogroup spi_module Working with SPI
|
|
* The SPI driver provides the interface to configure and use the SPI
|
|
* peripheral.
|
|
*
|
|
* The Serial Peripheral Interface (SPI) circuit is a synchronous serial
|
|
* data link that provides communication with external devices in Master
|
|
* or Slave Mode.
|
|
*
|
|
* To use the SPI, the user has to follow these few steps:
|
|
* -# Enable the SPI pins required by the application (see pio.h).
|
|
* -# Configure the SPI using the \ref SPI_Configure(). This enables the
|
|
* peripheral clock. The mode register is loaded with the given value.
|
|
* -# Configure all the necessary chip selects with \ref SPI_ConfigureNPCS().
|
|
* -# Enable the SPI by calling \ref SPI_Enable().
|
|
* -# Send/receive data using \ref SPI_Write() and \ref SPI_Read(). Note that \ref SPI_Read()
|
|
* must be called after \ref SPI_Write() to retrieve the last value read.
|
|
* -# Send/receive data using the PDC with the \ref SPI_WriteBuffer() and
|
|
* \ref SPI_ReadBuffer() functions.
|
|
* -# Disable the SPI by calling \ref SPI_Disable().
|
|
*
|
|
* For more accurate information, please look at the SPI section of the
|
|
* Datasheet.
|
|
*
|
|
* Related files :\n
|
|
* \ref spi.c\n
|
|
* \ref spi.h.\n
|
|
*/
|
|
/*@{*/
|
|
/*@}*/
|
|
|
|
/**
|
|
* \file
|
|
*
|
|
* Implementation of Serial Peripheral Interface (SPI) controller.
|
|
*
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------
|
|
* Headers
|
|
*----------------------------------------------------------------------------*/
|
|
|
|
#include "chip.h"
|
|
|
|
#include <stdint.h>
|
|
|
|
/*----------------------------------------------------------------------------
|
|
* Exported functions
|
|
*----------------------------------------------------------------------------*/
|
|
|
|
/**
|
|
* \brief Enables a SPI peripheral.
|
|
*
|
|
* \param spi Pointer to an Spi instance.
|
|
*/
|
|
extern void SPI_Enable( Spi* spi )
|
|
{
|
|
spi->SPI_CR = SPI_CR_SPIEN ;
|
|
}
|
|
|
|
/**
|
|
* \brief Disables a SPI peripheral.
|
|
*
|
|
* \param spi Pointer to an Spi instance.
|
|
*/
|
|
extern void SPI_Disable( Spi* spi )
|
|
{
|
|
spi->SPI_CR = SPI_CR_SPIDIS ;
|
|
}
|
|
|
|
/**
|
|
* \brief Enables one or more interrupt sources of a SPI peripheral.
|
|
*
|
|
* \param spi Pointer to an Spi instance.
|
|
* \param sources Bitwise OR of selected interrupt sources.
|
|
*/
|
|
extern void SPI_EnableIt( Spi* spi, uint32_t dwSources )
|
|
{
|
|
spi->SPI_IER = dwSources ;
|
|
}
|
|
|
|
/**
|
|
* \brief Disables one or more interrupt sources of a SPI peripheral.
|
|
*
|
|
* \param spi Pointer to an Spi instance.
|
|
* \param sources Bitwise OR of selected interrupt sources.
|
|
*/
|
|
extern void SPI_DisableIt( Spi* spi, uint32_t dwSources )
|
|
{
|
|
spi->SPI_IDR = dwSources ;
|
|
}
|
|
|
|
/**
|
|
* \brief Configures a SPI peripheral as specified. The configuration can be computed
|
|
* using several macros (see \ref spi_configuration_macros).
|
|
*
|
|
* \param spi Pointer to an Spi instance.
|
|
* \param id Peripheral ID of the SPI.
|
|
* \param configuration Value of the SPI configuration register.
|
|
*/
|
|
extern void SPI_Configure( Spi* spi, uint32_t dwId, uint32_t dwConfiguration )
|
|
{
|
|
pmc_enable_periph_clk( dwId ) ;
|
|
spi->SPI_CR = SPI_CR_SPIDIS ;
|
|
|
|
/* Execute a software reset of the SPI twice */
|
|
spi->SPI_CR = SPI_CR_SWRST ;
|
|
spi->SPI_CR = SPI_CR_SWRST ;
|
|
spi->SPI_MR = dwConfiguration ;
|
|
}
|
|
|
|
|
|
/**
|
|
* \brief Configures a chip select of a SPI peripheral. The chip select configuration
|
|
* is computed using several macros (see \ref spi_configuration_macros).
|
|
*
|
|
* \param spi Pointer to an Spi instance.
|
|
* \param npcs Chip select to configure (0, 1, 2 or 3).
|
|
* \param configuration Desired chip select configuration.
|
|
*/
|
|
void SPI_ConfigureNPCS( Spi* spi, uint32_t dwNpcs, uint32_t dwConfiguration )
|
|
{
|
|
spi->SPI_CSR[dwNpcs] = dwConfiguration ;
|
|
}
|
|
|
|
/**
|
|
* \brief Get the current status register of the given SPI peripheral.
|
|
* \note This resets the internal value of the status register, so further
|
|
* read may yield different values.
|
|
* \param spi Pointer to a Spi instance.
|
|
* \return SPI status register.
|
|
*/
|
|
extern uint32_t SPI_GetStatus( Spi* spi )
|
|
{
|
|
return spi->SPI_SR ;
|
|
}
|
|
|
|
/**
|
|
* \brief Reads and returns the last word of data received by a SPI peripheral. This
|
|
* method must be called after a successful SPI_Write call.
|
|
*
|
|
* \param spi Pointer to an Spi instance.
|
|
*
|
|
* \return readed data.
|
|
*/
|
|
extern uint32_t SPI_Read( Spi* spi )
|
|
{
|
|
while ( (spi->SPI_SR & SPI_SR_RDRF) == 0 ) ;
|
|
|
|
return spi->SPI_RDR & 0xFFFF ;
|
|
}
|
|
|
|
/**
|
|
* \brief Sends data through a SPI peripheral. If the SPI is configured to use a fixed
|
|
* peripheral select, the npcs value is meaningless. Otherwise, it identifies
|
|
* the component which shall be addressed.
|
|
*
|
|
* \param spi Pointer to an Spi instance.
|
|
* \param npcs Chip select of the component to address (0, 1, 2 or 3).
|
|
* \param data Word of data to send.
|
|
*/
|
|
extern void SPI_Write( Spi* spi, uint32_t dwNpcs, uint16_t wData )
|
|
{
|
|
/* Send data */
|
|
while ( (spi->SPI_SR & SPI_SR_TXEMPTY) == 0 ) ;
|
|
spi->SPI_TDR = wData | SPI_PCS( dwNpcs ) ;
|
|
while ( (spi->SPI_SR & SPI_SR_TDRE) == 0 ) ;
|
|
}
|
|
|
|
/**
|
|
* \brief Check if SPI transfer finish.
|
|
*
|
|
* \param spi Pointer to an Spi instance.
|
|
*
|
|
* \return Returns 1 if there is no pending write operation on the SPI; otherwise
|
|
* returns 0.
|
|
*/
|
|
extern uint32_t SPI_IsFinished( Spi* spi )
|
|
{
|
|
return ((spi->SPI_SR & SPI_SR_TXEMPTY) != 0) ;
|
|
}
|
|
|
|
#if (defined _SAM3S_) || (defined _SAM3S8_) || (defined _SAM3N_)
|
|
/**
|
|
* \brief Enable Spi PDC transmit
|
|
* \param spi Pointer to an Spi instance.
|
|
*/
|
|
extern void SPI_PdcEnableTx( Spi* spi )
|
|
{
|
|
spi->SPI_PTCR = SPI_PTCR_TXTEN ;
|
|
}
|
|
|
|
/**
|
|
* \brief Disable Spi PDC transmit
|
|
* \param spi Pointer to an Spi instance.
|
|
*/
|
|
extern void SPI_PdcDisableTx( Spi* spi )
|
|
{
|
|
spi->SPI_PTCR = SPI_PTCR_TXTDIS ;
|
|
}
|
|
|
|
/**
|
|
* \brief Enable Spi PDC receive
|
|
* \param spi Pointer to an Spi instance.
|
|
*/
|
|
extern void SPI_PdcEnableRx( Spi* spi )
|
|
{
|
|
spi->SPI_PTCR = SPI_PTCR_RXTEN ;
|
|
}
|
|
|
|
/**
|
|
* \brief Disable Spi PDC receive
|
|
* \param spi Pointer to an Spi instance.
|
|
*/
|
|
extern void SPI_PdcDisableRx( Spi* spi )
|
|
{
|
|
spi->SPI_PTCR = SPI_PTCR_RXTDIS ;
|
|
}
|
|
|
|
/**
|
|
* \brief Set PDC transmit and next transmit buffer address and size.
|
|
*
|
|
* \param spi Pointer to an Spi instance.
|
|
* \param txBuf PDC transmit buffer address.
|
|
* \param txCount Length in bytes of the transmit buffer.
|
|
* \param txNextBuf PDC next transmit buffer address.
|
|
* \param txNextCount Length in bytes of the next transmit buffer.
|
|
*/
|
|
extern void SPI_PdcSetTx( Spi* spi, void* pvTxBuf, uint32_t dwTxCount, void* pvTxNextBuf, uint32_t dwTxNextCount )
|
|
{
|
|
spi->SPI_TPR = (uint32_t)pvTxBuf ;
|
|
spi->SPI_TCR = dwTxCount ;
|
|
spi->SPI_TNPR = (uint32_t)pvTxNextBuf ;
|
|
spi->SPI_TNCR = dwTxNextCount ;
|
|
}
|
|
|
|
/**
|
|
* \brief Set PDC receive and next receive buffer address and size.
|
|
*
|
|
* \param spi Pointer to an Spi instance.
|
|
* \param rxBuf PDC receive buffer address.
|
|
* \param rxCount Length in bytes of the receive buffer.
|
|
* \param rxNextBuf PDC next receive buffer address.
|
|
* \param rxNextCount Length in bytes of the next receive buffer.
|
|
*/
|
|
extern void SPI_PdcSetRx( Spi* spi, void* pvRxBuf, uint32_t dwRxCount, void* pvRxNextBuf, uint32_t dwRxNextCount )
|
|
{
|
|
spi->SPI_RPR = (uint32_t)pvRxBuf ;
|
|
spi->SPI_RCR = dwRxCount ;
|
|
spi->SPI_RNPR = (uint32_t)pvRxNextBuf ;
|
|
spi->SPI_RNCR = dwRxNextCount ;
|
|
}
|
|
|
|
/**
|
|
* \brief Sends the contents of buffer through a SPI peripheral, using the PDC to
|
|
* take care of the transfer.
|
|
*
|
|
* \param spi Pointer to an Spi instance.
|
|
* \param buffer Data buffer to send.
|
|
* \param length Length of the data buffer.
|
|
*/
|
|
extern uint32_t SPI_WriteBuffer( Spi* spi, void* pvBuffer, uint32_t dwLength )
|
|
{
|
|
/* Check if first bank is free */
|
|
if ( spi->SPI_TCR == 0 )
|
|
{
|
|
spi->SPI_TPR = (uint32_t)pvBuffer ;
|
|
spi->SPI_TCR = dwLength ;
|
|
spi->SPI_PTCR = PERIPH_PTCR_TXTEN ;
|
|
|
|
return 1 ;
|
|
}
|
|
/* Check if second bank is free */
|
|
else
|
|
{
|
|
if ( spi->SPI_TNCR == 0 )
|
|
{
|
|
spi->SPI_TNPR = (uint32_t)pvBuffer ;
|
|
spi->SPI_TNCR = dwLength ;
|
|
|
|
return 1 ;
|
|
}
|
|
}
|
|
|
|
/* No free banks */
|
|
return 0 ;
|
|
}
|
|
|
|
/**
|
|
* \brief Reads data from a SPI peripheral until the provided buffer is filled. This
|
|
* method does NOT need to be called after SPI_Write or SPI_WriteBuffer.
|
|
*
|
|
* \param spi Pointer to an Spi instance.
|
|
* \param buffer Data buffer to store incoming bytes.
|
|
* \param length Length in bytes of the data buffer.
|
|
*/
|
|
extern uint32_t SPI_ReadBuffer( Spi* spi, void *pvBuffer, uint32_t dwLength )
|
|
{
|
|
/* Check if the first bank is free */
|
|
if ( spi->SPI_RCR == 0 )
|
|
{
|
|
spi->SPI_RPR = (uint32_t)pvBuffer ;
|
|
spi->SPI_RCR = dwLength ;
|
|
spi->SPI_PTCR = PERIPH_PTCR_RXTEN ;
|
|
|
|
return 1 ;
|
|
}
|
|
/* Check if second bank is free */
|
|
else
|
|
{
|
|
if ( spi->SPI_RNCR == 0 )
|
|
{
|
|
spi->SPI_RNPR = (uint32_t)pvBuffer ;
|
|
spi->SPI_RNCR = dwLength ;
|
|
return 1 ;
|
|
}
|
|
}
|
|
|
|
/* No free bank */
|
|
return 0 ;
|
|
}
|
|
|
|
#endif /* (defined _SAM3S_) || (defined _SAM3S8_) || (defined _SAM3N_) */
|
|
|