1
0
mirror of https://github.com/arduino/Arduino.git synced 2024-11-29 10:24:12 +01:00
Arduino/build/shared/lib/avrlib/sta013.h
2005-08-25 21:06:28 +00:00

127 lines
4.5 KiB
C
Executable File

/*! \file sta013.h \brief STMicroelectronics STA013 MP3 player driver. */
//*****************************************************************************
//
// File Name : 'sta013.h'
// Title : STMicroelectronics STA013 MP3 player driver
// Author : Pascal Stang
// Created : 10/22/2000
// Revised : 12/04/2000
// Version : 0.3
// Target MCU : ATmega103 (should work for Atmel AVR Series)
// Editor Tabs : 4
//
// NOTE: This code is currently below version 1.0, and therefore is considered
// to be lacking in some functionality or documentation, or may not be fully
// tested. Nonetheless, you can expect most functions to work.
//
// This code is distributed under the GNU Public License
// which can be found at http://www.gnu.org/licenses/gpl.txt
//
//*****************************************************************************
#ifndef STA013_H
#define STA013_H
#include "global.h"
// include project-dependent configuration
#include "sta013conf.h"
// STA013 I2C address
#define STA_I2C_DEV 0x86
#define STA_IDENT 0xAC
// STA013 register (sub)address
#define STA_REG_VERSION 0x00
#define STA_REG_IDENT 0x01
#define STA_REG_PLLCTL_1 0x05
#define STA_REG_PLLCTL_2 0x06
#define STA_REG_PLLCTL_3 0x07
#define STA_REG_REQ_POL 0x0c
#define STA_REG_SCLK_POL 0x0d
#define STA_REG_ERROR_CODE 0x0f
#define STA_REG_SOFT_RESET 0x10
#define STA_REG_PLAY 0x13
#define STA_REG_MUTE 0x14
#define STA_REG_CMD_INTERRUPT 0x16
#define STA_REG_DATA_REQ_ENABLE 0x18
#define STA_REG_SYNCSTATUS 0x40
#define STA_REG_ANCCOUNT_L 0x41
#define STA_REG_ANCCOUNT_H 0x42
#define STA_REG_HEAD_H 0x43
#define STA_REG_HEAD_M 0x44
#define STA_REG_HEAD_L 0x45
#define STA_REG_DLA 0x46
#define STA_REG_DLB 0x47
#define STA_REG_DRA 0x48
#define STA_REG_DRB 0x49
#define STA_REG_MFSDF_441 0x50
#define STA_REG_PLLFRAC_441_L 0x51
#define STA_REG_PLLFRAC_441_H 0x52
#define STA_REG_PCMDIVIDER 0x54
#define STA_REG_PCMCONF 0x55
#define STA_REG_PCMCROSS 0x56
#define STA_REG_ANC_DATA_1 0x59
#define STA_REG_ANC_DATA_2 0x5a
#define STA_REG_ANC_DATA_3 0x5b
#define STA_REG_ANC_DATA_4 0x5c
#define STA_REG_ANC_DATA_5 0x5d
#define STA_REG_MFSDF 0x61
#define STA_REG_DAC_CLK_MODE 0x63
#define STA_REG_PLLFRAC_L 0x64
#define STA_REG_PLLFRAC_H 0x65
#define STA_REG_FRAME_CNT_L 0x67
#define STA_REG_FRAME_CNT_M 0x68
#define STA_REG_FRAME_CNT_H 0x69
#define STA_REG_AVERAGE_BITRATE 0x6a
#define STA_REG_SOFTVERSION 0x71
#define STA_REG_RUN 0x72
#define STA_REG_TREBLE_FREQUENCY_LOW 0x77
#define STA_REG_TREBLE_FREQUENCY_HIGH 0x78
#define STA_REG_BASS_FREQUENCY_LOW 0x79
#define STA_REG_BASS_FREQUENCY_HIGH 0x7a
#define STA_REG_TREBLE_ENHANCE 0x7b
#define STA_REG_BASS_ENHANCE 0x7c
#define STA_REG_TONE_ATTEN 0x7d
#define MIN_VOLUME_ATTENUATION 0
#define MAX_VOLUME_ATTENUATION 96
#define MIN_TONE_ATTENUATION 0
#define MAX_TONE_ATTENUATION 96
#define MIN_BASS_FREQUENCY 100
#define MAX_BASS_FREQUENCY 500
#define MIN_BASS_ENHANCE -12 // -18dB in 1.5 dB steps
#define MAX_BASS_ENHANCE +12 // +18dB in 1.5 dB steps
#define MIN_TREBLE_FREQUENCY 1000
#define MAX_TREBLE_FREQUENCY 5000
#define MIN_TREBLE_ENHANCE -12 // -18dB in 1.5 dB steps
#define MAX_TREBLE_ENHANCE +12 // +18dB in 1.5 dB steps
#define SOFTMUTE_VOLUME_CHANGE 20
// global variables
//u16 Sta013UpdateIndex;
// prototypes
void sta013HWReset(void);
u08 sta013ReadReg(u08 reg);
void sta013WriteReg(u08 reg, u08 data);
void sta013DownloadUpdate(void);
u08 sta013Init(void);
void sta013StartDecoder(void);
void sta013StopDecoder(void);
void sta013PauseDecoder(void);
void sta013ResumeDecoder(void);
void sta013GetMP3Info(u16 *bitrate, u08 *sampFreq, u08 *mode);
u16 sta013GetAverageBitrate(void);
void sta013SetVolume(u08 volume, s08 balance);
void sta013SetTone(s08 bassEnh, u16 bassFreq, s08 trebleEnh, u16 trebleFreq);
u08 sta013Demand(void);
#endif