mirror of
https://github.com/arduino/Arduino.git
synced 2024-12-12 23:08:52 +01:00
2fa8deb92d
Compilation still has problems (Thread error on success, and can't handle non-pde files in a sketch). Modified the Mac OS X make.sh to copy the hardware, avr tools, and example over. Removing some of the antlr stuff. Disabling the Commander (command-line execution) for now. Added Library, LibraryManager, and Target. Added support for prefixed preferences (e.g. for boards and programmers).
35 lines
1.4 KiB
Plaintext
35 lines
1.4 KiB
Plaintext
/* Knock Sensor
|
|
* by DojoDave <http://www.0j0.org>
|
|
*
|
|
* Program using a Piezo element as if it was a knock sensor.
|
|
*
|
|
* We have to basically listen to an analog pin and detect
|
|
* if the signal goes over a certain threshold. It writes
|
|
* "knock" to the serial port if the Threshold is crossed,
|
|
* and toggles the LED on pin 13.
|
|
*
|
|
* http://www.arduino.cc/en/Tutorial/Knock
|
|
*/
|
|
|
|
int ledPin = 13; // led connected to control pin 13
|
|
int knockSensor = 0; // the knock sensor will be plugged at analog pin 0
|
|
byte val = 0; // variable to store the value read from the sensor pin
|
|
int statePin = LOW; // variable used to store the last LED status, to toggle the light
|
|
int THRESHOLD = 100; // threshold value to decide when the detected sound is a knock or not
|
|
|
|
void setup() {
|
|
pinMode(ledPin, OUTPUT); // declare the ledPin as as OUTPUT
|
|
Serial.begin(9600); // use the serial port
|
|
}
|
|
|
|
void loop() {
|
|
val = analogRead(knockSensor); // read the sensor and store it in the variable "val"
|
|
if (val >= THRESHOLD) {
|
|
statePin = !statePin; // toggle the status of the ledPin (this trick doesn't use time cycles)
|
|
digitalWrite(ledPin, statePin); // turn the led on or off
|
|
Serial.println("Knock!"); // send the string "Knock!" back to the computer, followed by newline
|
|
}
|
|
delay(100); // we have to make a delay to avoid overloading the serial port
|
|
}
|
|
|