mirror of
https://github.com/arduino/Arduino.git
synced 2024-12-04 15:24:12 +01:00
62 lines
1.5 KiB
Plaintext
62 lines
1.5 KiB
Plaintext
/*
|
|
Memsic2125
|
|
|
|
Read the Memsic 2125 two-axis accelerometer. Converts the
|
|
pulses output by the 2125 into milli-g's (1/1000 of earth's
|
|
gravity) and prints them over the serial connection to the
|
|
computer.
|
|
|
|
The circuit:
|
|
* X output of accelerometer to digital pin 2
|
|
* Y output of accelerometer to digital pin 3
|
|
* +V of accelerometer to +5V
|
|
* GND of accelerometer to ground
|
|
|
|
http://www.arduino.cc/en/Tutorial/Memsic2125
|
|
|
|
created 6 Nov 2008
|
|
by David A. Mellis
|
|
modified 30 Jun 2009
|
|
by Tom Igoe
|
|
|
|
*/
|
|
|
|
// these constants won't change:
|
|
const int xPin = 2; // X output of the accelerometer
|
|
const int yPin = 3; // Y output of the accelerometer
|
|
|
|
void setup() {
|
|
// initialize serial communications:
|
|
Serial.begin(9600);
|
|
// initialize the pins connected to the accelerometer
|
|
// as inputs:
|
|
pinMode(xPin, INPUT);
|
|
pinMode(yPin, INPUT);
|
|
}
|
|
|
|
void loop() {
|
|
// variables to read the pulse widths:
|
|
int pulseX, pulseY;
|
|
// variables to contain the resulting accelerations
|
|
int accelerationX, accelerationY;
|
|
|
|
// read pulse from x- and y-axes:
|
|
pulseX = pulseIn(xPin,HIGH);
|
|
pulseY = pulseIn(yPin,HIGH);
|
|
|
|
// convert the pulse width into acceleration
|
|
// accelerationX and accelerationY are in milli-g's:
|
|
// earth's gravity is 1000 milli-g's, or 1g.
|
|
accelerationX = ((pulseX / 10) - 500) * 8;
|
|
accelerationY = ((pulseY / 10) - 500) * 8;
|
|
|
|
// print the acceleration
|
|
Serial.print(accelerationX);
|
|
// print a tab character:
|
|
Serial.print("\t");
|
|
Serial.print(accelerationY);
|
|
Serial.println();
|
|
|
|
delay(100);
|
|
}
|