1
0
mirror of https://github.com/arduino/Arduino.git synced 2024-12-12 23:08:52 +01:00
Arduino/build/shared/lib/avrlib/ata.h
2005-08-25 21:06:28 +00:00

183 lines
6.1 KiB
C
Executable File

/*! \file ata.h \brief IDE-ATA hard disk interface driver. */
//*****************************************************************************
//
// File Name : 'ata.h'
// Title : IDE-ATA interface driver for hard disks
// Author : Pascal Stang
// Date : 11/22/2000
// Revised : 12/29/2000
// Version : 0.3
// Target MCU : ATmega103 (should work for Atmel AVR Series)
// Editor Tabs : 4
//
// NOTE: This code is currently below version 1.0, and therefore is considered
// to be lacking in some functionality or documentation, or may not be fully
// tested. Nonetheless, you can expect most functions to work.
//
// This code is distributed under the GNU Public License
// which can be found at http://www.gnu.org/licenses/gpl.txt
//
//*****************************************************************************
#ifndef ATA_H
#define ATA_H
#include "global.h"
#include "ataconf.h"
// constants
#define DRIVE0 0
#define STANDBY 0
#define SLEEP 1
#define IDLE 2
// ATA status register bits
#define ATA_SR_BSY 0x80
#define ATA_SR_DRDY 0x40
#define ATA_SR_DF 0x20
#define ATA_SR_DSC 0x10
#define ATA_SR_DRQ 0x08
#define ATA_SR_CORR 0x04
#define ATA_SR_IDX 0x02
#define ATA_SR_ERR 0x01
// ATA error register bits
#define ATA_ER_UNC 0x40
#define ATA_ER_MC 0x20
#define ATA_ER_IDNF 0x10
#define ATA_ER_MCR 0x08
#define ATA_ER_ABRT 0x04
#define ATA_ER_TK0NF 0x02
#define ATA_ER_AMNF 0x01
// ATA head register bits
#define ATA_HEAD_USE_LBA 0x40
/*
// ATA registers
#define ATA_REG_BASE 0x8000
#define ATA_REG_DATAL 0x00
#define ATA_REG_ERROR 0x01
#define ATA_REG_SECCOUNT 0x02
#define ATA_REG_STARTSEC 0x03
#define ATA_REG_CYLLO 0x04
#define ATA_REG_CYLHI 0x05
#define ATA_REG_HDDEVSEL 0x06
#define ATA_REG_CMDSTATUS1 0x07
#define ATA_REG_CMDSTATUS2 0x08
#define ATA_REG_ACTSTATUS 0x09
#define ATA_REG_DATAH 0x10
*/
// ATA commands
#define ATA_CMD_READ 0x20
#define ATA_CMD_READNR 0x21
#define ATA_CMD_WRITE 0x30
#define ATA_CMD_WRITENR 0x31
#define ATA_CMD_IDENTIFY 0xEC
#define ATA_CMD_RECALIBRATE 0x10
#define ATA_CMD_SPINDOWN 0xE0 // spin down disk immediately
#define ATA_CMD_SPINUP 0xE1 // spin up disk immediately
#define ATA_CMD_STANDBY_5SU 0xE2 // spin down disk and set auto-power-down timer (sectorcount*5sec)
#define ATA_CMD_IDLE_5SU 0xE3 // keep disk spinning and set auto-power-down timer (sectorcount*5sec)
#define ATA_CMD_SLEEP 0xE6 // sleep disk (wakeup only on HW or SW reset)
#define ATA_CMD_STANDBY_01SU 0xF2 // spin down disk and set auto-power-down timer (sectorcount*0.1sec)
#define ATA_CMD_IDLE_01SU 0xF3 // keep disk spinning and set auto-power-down timer (sectorcount*0.1sec)
// ATA CHS disk parameters (examples, now we autodetect)
#define ATA_DISKPARM_CLYS 0x03A6 // number of cylinders per platter
#define ATA_DISKPARM_HEADS 0x10 // number of heads (usable plater sides)
#define ATA_DISKPARM_SECTORS 0x11 // number of sectors per head per cylinder
// ATA Identity fields
// all offsets refer to word offset (2 byte increments)
#define ATA_IDENT_DEVICETYPE 0 // specifies ATA/ATAPI, removable/non-removable
#define ATA_IDENT_CYLINDERS 1 // number of logical cylinders
#define ATA_IDENT_HEADS 3 // number of logical heads
#define ATA_IDENT_SECTORS 6 // number of sectors per track
#define ATA_IDENT_SERIAL 10 // drive model name (20 characters)
#define ATA_IDENT_MODEL 27 // drive model name (40 characters)
#define ATA_IDENT_FIELDVALID 53 // indicates field validity of higher words (bit0: words54-58, bit1: words 64-70)
#define ATA_IDENT_LBASECTORS 60 // number of sectors in LBA translation mode
// drive mode defines (for ataSetDrivePowerMode() )
#define ATA_DISKMODE_SPINDOWN 0
#define ATA_DISKMODE_SPINUP 1
#define ATA_DISKMODE_SETTIMEOUT 2
#define ATA_DISKMODE_SLEEP 3
// typedefs
// drive info structure
typedef struct
{
unsigned int cylinders;
unsigned char heads;
unsigned char sectors;
unsigned long sizeinsectors;
unsigned char LBAsupport;
char model[41];
} typeDriveInfo;
// Prototypes
void ataInit(void);
void ataDriveInit(void);
void ataDriveSelect(u08 DriveNo);
void ataSetDrivePowerMode(u08 DriveNo, u08 mode, u08 timeout);
u08 ataReadByte(u08 reg);
void ataWriteByte(u08 reg, u08 data);
void ataShowRegisters(unsigned char DriveNo);
u08 ataSWReset(void);
void ataDiskErr(void);
void ataPrintSector( u08 *Buffer);
void ataReadDataBuffer(u08 *Buffer, u16 numBytes);
void ataWriteDataBuffer(u08 *Buffer, u16 numBytes);
u08 ataStatusWait(u08 mask, u08 waitStatus);
// read and write routines for CHS based drives
unsigned char ataReadSectorsCHS( unsigned char Drive,
unsigned char Head,
unsigned int Track,
unsigned char Sector,
unsigned int numsectors,
unsigned char *Buffer);
unsigned char ataWriteSectorsCHS( unsigned char Drive,
unsigned char Head,
unsigned int Track,
unsigned char Sector,
unsigned int numsectors,
unsigned char *Buffer);
// read and write routines for LBA based drives
unsigned char ataReadSectorsLBA( unsigned char Drive,
unsigned long lba,
unsigned int numsectors,
unsigned char *Buffer);
unsigned char ataWriteSectorsLBA( unsigned char Drive,
unsigned long lba,
unsigned int numsectors,
unsigned char *Buffer);
// generic read and write routines using LBA
// uses native or translated LBA addressing
// given autodetected drive type
unsigned char ataReadSectors( unsigned char Drive,
unsigned long lba,
unsigned int numsectors,
unsigned char *Buffer);
unsigned char ataWriteSectors( unsigned char Drive,
unsigned long lba,
unsigned int numsectors,
unsigned char *Buffer);
//unsigned char IdentifyDrive(unsigned char DriveNo, unsigned char *Buffer, tdefDriveInfo *DriveInfo);
//unsigned char SetMode(unsigned char DriveNo, unsigned char Mode, unsigned char PwrDown);
//unsigned char ATA_Idle(unsigned char Drive);
#endif