mirror of
https://github.com/arduino/Arduino.git
synced 2024-12-03 14:24:15 +01:00
451 lines
13 KiB
C
451 lines
13 KiB
C
/* ----------------------------------------------------------------------------
|
|
* SAM Software Package License
|
|
* ----------------------------------------------------------------------------
|
|
* Copyright (c) 2011-2012, Atmel Corporation
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following condition is met:
|
|
*
|
|
* - Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the disclaimer below.
|
|
*
|
|
* Atmel's name may not be used to endorse or promote products derived from
|
|
* this software without specific prior written permission.
|
|
*
|
|
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
|
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
|
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
|
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
|
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
* ----------------------------------------------------------------------------
|
|
*/
|
|
|
|
/** \addtogroup rtc_module Working with RTC
|
|
* The RTC driver provides the interface to configure and use the RTC
|
|
* peripheral.
|
|
*
|
|
* It manages date, time, and alarms.\n
|
|
* This timer is clocked by the 32kHz system clock, and is not impacted by
|
|
* power management settings (PMC). To be accurate, it is better to use an
|
|
* external 32kHz crystal instead of the internal 32kHz RC.\n
|
|
*
|
|
* It uses BCD format, and time can be set in AM/PM or 24h mode through a
|
|
* configuration bit in the mode register.\n
|
|
*
|
|
* To update date or time, the user has to follow these few steps :
|
|
* <ul>
|
|
* <li>Set UPDTIM and/or UPDCAL bit(s) in RTC_CR,</li>
|
|
* <li>Polling or IRQ on the ACKUPD bit of RTC_CR,</li>
|
|
* <li>Clear ACKUPD bit in RTC_SCCR,</li>
|
|
* <li>Update Time and/or Calendar values in RTC_TIMR/RTC_CALR (BCD format),</li>
|
|
* <li>Clear UPDTIM and/or UPDCAL bit in RTC_CR.</li>
|
|
* </ul>
|
|
* An alarm can be set to happen on month, date, hours, minutes or seconds,
|
|
* by setting the proper "Enable" bit of each of these fields in the Time and
|
|
* Calendar registers.
|
|
* This allows a large number of configurations to be available for the user.
|
|
* Alarm occurence can be detected even by polling or interrupt.
|
|
*
|
|
* A check of the validity of the date and time format and values written by the user is automatically done.
|
|
* Errors are reported through the Valid Entry Register.
|
|
*
|
|
* For more accurate information, please look at the RTC section of the
|
|
* Datasheet.
|
|
*
|
|
* Related files :\n
|
|
* \ref rtc.c\n
|
|
* \ref rtc.h.\n
|
|
*/
|
|
/*@{*/
|
|
/*@}*/
|
|
|
|
|
|
/**
|
|
* \file
|
|
*
|
|
* Implementation of Real Time Clock (RTC) controller.
|
|
*
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------
|
|
* Headers
|
|
*----------------------------------------------------------------------------*/
|
|
|
|
#include "chip.h"
|
|
|
|
#include <stdint.h>
|
|
#include <assert.h>
|
|
|
|
/*----------------------------------------------------------------------------
|
|
* Exported functions
|
|
*----------------------------------------------------------------------------*/
|
|
|
|
/**
|
|
* \brief Sets the RTC in either 12 or 24 hour mode.
|
|
*
|
|
* \param mode Hour mode.
|
|
*/
|
|
extern void RTC_SetHourMode( Rtc* pRtc, uint32_t dwMode )
|
|
{
|
|
assert((dwMode & 0xFFFFFFFE) == 0);
|
|
|
|
pRtc->RTC_MR = dwMode ;
|
|
}
|
|
|
|
/**
|
|
* \brief Gets the RTC mode.
|
|
*
|
|
* \return Hour mode.
|
|
*/
|
|
extern uint32_t RTC_GetHourMode( Rtc* pRtc )
|
|
{
|
|
uint32_t dwMode ;
|
|
|
|
dwMode = pRtc->RTC_MR;
|
|
dwMode &= 0xFFFFFFFE;
|
|
|
|
return dwMode ;
|
|
}
|
|
|
|
/**
|
|
* \brief Enables the selected interrupt sources of the RTC.
|
|
*
|
|
* \param sources Interrupt sources to enable.
|
|
*/
|
|
extern void RTC_EnableIt( Rtc* pRtc, uint32_t dwSources )
|
|
{
|
|
assert((dwSources & (uint32_t)(~0x1F)) == 0);
|
|
|
|
pRtc->RTC_IER = dwSources ;
|
|
}
|
|
|
|
/**
|
|
* \brief Disables the selected interrupt sources of the RTC.
|
|
*
|
|
* \param sources Interrupt sources to disable.
|
|
*/
|
|
extern void RTC_DisableIt( Rtc* pRtc, uint32_t dwSources )
|
|
{
|
|
assert((dwSources & (uint32_t)(~0x1F)) == 0);
|
|
|
|
pRtc->RTC_IDR = dwSources ;
|
|
}
|
|
|
|
/**
|
|
* \brief Sets the current time in the RTC.
|
|
*
|
|
* \note In successive update operations, the user must wait at least one second
|
|
* after resetting the UPDTIM/UPDCAL bit in the RTC_CR before setting these
|
|
* bits again. Please look at the RTC section of the datasheet for detail.
|
|
*
|
|
* \param ucHour Current hour in 12 or 24 hour mode.
|
|
* \param ucMinute Current minute.
|
|
* \param ucSecond Current second.
|
|
*
|
|
* \return 0 sucess, 1 fail to set
|
|
*/
|
|
extern int RTC_SetTime( Rtc* pRtc, uint8_t ucHour, uint8_t ucMinute, uint8_t ucSecond )
|
|
{
|
|
uint32_t dwTime=0 ;
|
|
uint8_t ucHour_bcd ;
|
|
uint8_t ucMin_bcd ;
|
|
uint8_t ucSec_bcd ;
|
|
|
|
/* if 12-hour mode, set AMPM bit */
|
|
if ( (pRtc->RTC_MR & RTC_MR_HRMOD) == RTC_MR_HRMOD )
|
|
{
|
|
if ( ucHour > 12 )
|
|
{
|
|
ucHour -= 12 ;
|
|
dwTime |= RTC_TIMR_AMPM ;
|
|
}
|
|
}
|
|
ucHour_bcd = (ucHour%10) | ((ucHour/10)<<4) ;
|
|
ucMin_bcd = (ucMinute%10) | ((ucMinute/10)<<4) ;
|
|
ucSec_bcd = (ucSecond%10) | ((ucSecond/10)<<4) ;
|
|
|
|
/* value overflow */
|
|
if ( (ucHour_bcd & (uint8_t)(~RTC_HOUR_BIT_LEN_MASK)) |
|
|
(ucMin_bcd & (uint8_t)(~RTC_MIN_BIT_LEN_MASK)) |
|
|
(ucSec_bcd & (uint8_t)(~RTC_SEC_BIT_LEN_MASK)))
|
|
{
|
|
return 1 ;
|
|
}
|
|
|
|
dwTime = ucSec_bcd | (ucMin_bcd << 8) | (ucHour_bcd<<16) ;
|
|
|
|
pRtc->RTC_CR |= RTC_CR_UPDTIM ;
|
|
while ((pRtc->RTC_SR & RTC_SR_ACKUPD) != RTC_SR_ACKUPD) ;
|
|
pRtc->RTC_SCCR = RTC_SCCR_ACKCLR ;
|
|
pRtc->RTC_TIMR = dwTime ;
|
|
pRtc->RTC_CR &= (uint32_t)(~RTC_CR_UPDTIM) ;
|
|
pRtc->RTC_SCCR |= RTC_SCCR_SECCLR ;
|
|
|
|
return (int)(pRtc->RTC_VER & RTC_VER_NVTIM) ;
|
|
}
|
|
|
|
/**
|
|
* \brief Retrieves the current time as stored in the RTC in several variables.
|
|
*
|
|
* \param pucHour If not null, current hour is stored in this variable.
|
|
* \param pucMinute If not null, current minute is stored in this variable.
|
|
* \param pucSecond If not null, current second is stored in this variable.
|
|
*/
|
|
extern void RTC_GetTime( Rtc* pRtc, uint8_t *pucHour, uint8_t *pucMinute, uint8_t *pucSecond )
|
|
{
|
|
uint32_t dwTime ;
|
|
|
|
/* Get current RTC time */
|
|
dwTime = pRtc->RTC_TIMR ;
|
|
while ( dwTime != pRtc->RTC_TIMR )
|
|
{
|
|
dwTime = pRtc->RTC_TIMR ;
|
|
}
|
|
|
|
/* Hour */
|
|
if ( pucHour )
|
|
{
|
|
*pucHour = ((dwTime & 0x00300000) >> 20) * 10
|
|
+ ((dwTime & 0x000F0000) >> 16);
|
|
|
|
if ( (dwTime & RTC_TIMR_AMPM) == RTC_TIMR_AMPM )
|
|
{
|
|
*pucHour += 12 ;
|
|
}
|
|
}
|
|
|
|
/* Minute */
|
|
if ( pucMinute )
|
|
{
|
|
*pucMinute = ((dwTime & 0x00007000) >> 12) * 10
|
|
+ ((dwTime & 0x00000F00) >> 8);
|
|
}
|
|
|
|
/* Second */
|
|
if ( pucSecond )
|
|
{
|
|
*pucSecond = ((dwTime & 0x00000070) >> 4) * 10
|
|
+ (dwTime & 0x0000000F);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* \brief Sets a time alarm on the RTC.
|
|
* The match is performed only on the provided variables;
|
|
* Setting all pointers to 0 disables the time alarm.
|
|
*
|
|
* \note In AM/PM mode, the hour value must have bit #7 set for PM, cleared for
|
|
* AM (as expected in the time registers).
|
|
*
|
|
* \param pucHour If not null, the time alarm will hour-match this value.
|
|
* \param pucMinute If not null, the time alarm will minute-match this value.
|
|
* \param pucSecond If not null, the time alarm will second-match this value.
|
|
*
|
|
* \return 0 success, 1 fail to set
|
|
*/
|
|
extern int RTC_SetTimeAlarm( Rtc* pRtc, uint8_t *pucHour, uint8_t *pucMinute, uint8_t *pucSecond )
|
|
{
|
|
uint32_t dwAlarm=0 ;
|
|
|
|
/* Hour */
|
|
if ( pucHour )
|
|
{
|
|
dwAlarm |= RTC_TIMALR_HOUREN | ((*pucHour / 10) << 20) | ((*pucHour % 10) << 16);
|
|
}
|
|
|
|
/* Minute */
|
|
if ( pucMinute )
|
|
{
|
|
dwAlarm |= RTC_TIMALR_MINEN | ((*pucMinute / 10) << 12) | ((*pucMinute % 10) << 8);
|
|
}
|
|
|
|
/* Second */
|
|
if ( pucSecond )
|
|
{
|
|
dwAlarm |= RTC_TIMALR_SECEN | ((*pucSecond / 10) << 4) | (*pucSecond % 10);
|
|
}
|
|
|
|
pRtc->RTC_TIMALR = dwAlarm ;
|
|
|
|
return (int)(pRtc->RTC_VER & RTC_VER_NVTIMALR) ;
|
|
}
|
|
|
|
/**
|
|
* \brief Retrieves the current year, month and day from the RTC.
|
|
* Month, day and week values are numbered starting at 1.
|
|
*
|
|
* \param pYwear Current year (optional).
|
|
* \param pucMonth Current month (optional).
|
|
* \param pucDay Current day (optional).
|
|
* \param pucWeek Current day in current week (optional).
|
|
*/
|
|
extern void RTC_GetDate( Rtc* pRtc, uint16_t *pwYear, uint8_t *pucMonth, uint8_t *pucDay, uint8_t *pucWeek )
|
|
{
|
|
uint32_t dwDate ;
|
|
|
|
/* Get current date (multiple reads are necessary to insure a stable value) */
|
|
do
|
|
{
|
|
dwDate = pRtc->RTC_CALR ;
|
|
}
|
|
while ( dwDate != pRtc->RTC_CALR ) ;
|
|
|
|
/* Retrieve year */
|
|
if ( pwYear )
|
|
{
|
|
*pwYear = (((dwDate >> 4) & 0x7) * 1000)
|
|
+ ((dwDate & 0xF) * 100)
|
|
+ (((dwDate >> 12) & 0xF) * 10)
|
|
+ ((dwDate >> 8) & 0xF);
|
|
}
|
|
|
|
/* Retrieve month */
|
|
if ( pucMonth )
|
|
{
|
|
*pucMonth = (((dwDate >> 20) & 1) * 10) + ((dwDate >> 16) & 0xF);
|
|
}
|
|
|
|
/* Retrieve day */
|
|
if ( pucDay )
|
|
{
|
|
*pucDay = (((dwDate >> 28) & 0x3) * 10) + ((dwDate >> 24) & 0xF);
|
|
}
|
|
|
|
/* Retrieve week */
|
|
if ( pucWeek )
|
|
{
|
|
*pucWeek = ((dwDate >> 21) & 0x7);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* \brief Sets the current year, month and day in the RTC.
|
|
* Month, day and week values must be numbered starting from 1.
|
|
*
|
|
* \note In successive update operations, the user must wait at least one second
|
|
* after resetting the UPDTIM/UPDCAL bit in the RTC_CR before setting these
|
|
* bits again. Please look at the RTC section of the datasheet for detail.
|
|
*
|
|
* \param wYear Current year.
|
|
* \param ucMonth Current month.
|
|
* \param ucDay Current day.
|
|
* \param ucWeek Day number in current week.
|
|
*
|
|
* \return 0 success, 1 fail to set
|
|
*/
|
|
extern int RTC_SetDate( Rtc* pRtc, uint16_t wYear, uint8_t ucMonth, uint8_t ucDay, uint8_t ucWeek )
|
|
{
|
|
uint32_t wDate ;
|
|
uint8_t ucCent_bcd ;
|
|
uint8_t ucYear_bcd ;
|
|
uint8_t ucMonth_bcd ;
|
|
uint8_t ucDay_bcd ;
|
|
uint8_t ucWeek_bcd ;
|
|
|
|
ucCent_bcd = ((wYear/100)%10) | ((wYear/1000)<<4);
|
|
ucYear_bcd = (wYear%10) | (((wYear/10)%10)<<4);
|
|
ucMonth_bcd = ((ucMonth%10) | (ucMonth/10)<<4);
|
|
ucDay_bcd = ((ucDay%10) | (ucDay/10)<<4);
|
|
ucWeek_bcd = ((ucWeek%10) | (ucWeek/10)<<4);
|
|
|
|
/* value over flow */
|
|
if ( (ucCent_bcd & (uint8_t)(~RTC_CENT_BIT_LEN_MASK)) |
|
|
(ucYear_bcd & (uint8_t)(~RTC_YEAR_BIT_LEN_MASK)) |
|
|
(ucMonth_bcd & (uint8_t)(~RTC_MONTH_BIT_LEN_MASK)) |
|
|
(ucWeek_bcd & (uint8_t)(~RTC_WEEK_BIT_LEN_MASK)) |
|
|
(ucDay_bcd & (uint8_t)(~RTC_DATE_BIT_LEN_MASK))
|
|
)
|
|
{
|
|
return 1 ;
|
|
}
|
|
|
|
|
|
/* Convert values to date register value */
|
|
wDate = ucCent_bcd |
|
|
(ucYear_bcd << 8) |
|
|
(ucMonth_bcd << 16) |
|
|
(ucWeek_bcd << 21) |
|
|
(ucDay_bcd << 24);
|
|
|
|
/* Update calendar register */
|
|
pRtc->RTC_CR |= RTC_CR_UPDCAL ;
|
|
while ((pRtc->RTC_SR & RTC_SR_ACKUPD) != RTC_SR_ACKUPD) ;
|
|
|
|
pRtc->RTC_SCCR = RTC_SCCR_ACKCLR;
|
|
pRtc->RTC_CALR = wDate ;
|
|
pRtc->RTC_CR &= (uint32_t)(~RTC_CR_UPDCAL) ;
|
|
pRtc->RTC_SCCR |= RTC_SCCR_SECCLR; /* clear SECENV in SCCR */
|
|
|
|
return (int)(pRtc->RTC_VER & RTC_VER_NVCAL) ;
|
|
}
|
|
|
|
/**
|
|
* \brief Sets a date alarm in the RTC.
|
|
* The alarm will match only the provided values;
|
|
* Passing a null-pointer disables the corresponding field match.
|
|
*
|
|
* \param pucMonth If not null, the RTC alarm will month-match this value.
|
|
* \param pucDay If not null, the RTC alarm will day-match this value.
|
|
*
|
|
* \return 0 success, 1 fail to set
|
|
*/
|
|
extern int RTC_SetDateAlarm( Rtc* pRtc, uint8_t *pucMonth, uint8_t *pucDay )
|
|
{
|
|
uint32_t dwAlarm ;
|
|
|
|
dwAlarm = ((pucMonth) || (pucDay)) ? (0) : (0x01010000);
|
|
|
|
/* Compute alarm field value */
|
|
if ( pucMonth )
|
|
{
|
|
dwAlarm |= RTC_CALALR_MTHEN | ((*pucMonth / 10) << 20) | ((*pucMonth % 10) << 16);
|
|
}
|
|
|
|
if ( pucDay )
|
|
{
|
|
dwAlarm |= RTC_CALALR_DATEEN | ((*pucDay / 10) << 28) | ((*pucDay % 10) << 24);
|
|
}
|
|
|
|
/* Set alarm */
|
|
pRtc->RTC_CALALR = dwAlarm ;
|
|
|
|
return (int)(pRtc->RTC_VER & RTC_VER_NVCALALR) ;
|
|
}
|
|
|
|
/**
|
|
* \brief Clear flag bits of status clear command register in the RTC.
|
|
*
|
|
* \param mask Bits mask of cleared events
|
|
*/
|
|
extern void RTC_ClearSCCR( Rtc* pRtc, uint32_t dwMask )
|
|
{
|
|
/* Clear all flag bits in status clear command register */
|
|
dwMask &= RTC_SCCR_ACKCLR | RTC_SCCR_ALRCLR | RTC_SCCR_SECCLR | RTC_SCCR_TIMCLR | RTC_SCCR_CALCLR ;
|
|
|
|
pRtc->RTC_SCCR = dwMask ;
|
|
}
|
|
|
|
/**
|
|
* \brief Get flag bits of status register in the RTC.
|
|
*
|
|
* \param mask Bits mask of Status Register
|
|
*
|
|
* \return Status register & mask
|
|
*/
|
|
extern uint32_t RTC_GetSR( Rtc* pRtc, uint32_t dwMask )
|
|
{
|
|
uint32_t dwEvent ;
|
|
|
|
dwEvent = pRtc->RTC_SR ;
|
|
|
|
return (dwEvent & dwMask) ;
|
|
}
|
|
|