mirror of
https://github.com/arduino/Arduino.git
synced 2024-12-05 16:24:12 +01:00
193 lines
6.8 KiB
C++
193 lines
6.8 KiB
C++
/* Arduino FAT16 Library
|
|
* Copyright (C) 2008 by William Greiman
|
|
*
|
|
* This file is part of the Arduino FAT16 Library
|
|
*
|
|
* This Library is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This Library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with the Arduino Fat16 Library. If not, see
|
|
* <http://www.gnu.org/licenses/>.
|
|
*/
|
|
#ifndef SdCard_h
|
|
#define SdCard_h
|
|
/**
|
|
* \file
|
|
* SdCard class
|
|
*/
|
|
#include <SdInfo.h>
|
|
//------------------------------------------------------------------------------
|
|
// Warning only SD_CHIP_SELECT_PIN, the SD card select pin, may be redefined.
|
|
// define hardware SPI pins
|
|
#if defined(__AVR_ATmega168__)\
|
|
||defined(__AVR_ATmega168P__)\
|
|
||defined(__AVR_ATmega328P__)
|
|
// 168 and 328 Arduinos
|
|
/** Slave Select pin */
|
|
uint8_t const SPI_SS_PIN = 10;
|
|
/** Master Out Slave In pin */
|
|
uint8_t const SPI_MOSI_PIN = 11;
|
|
/** Master In Slave Out pin */
|
|
uint8_t const SPI_MISO_PIN = 12;
|
|
/** Serial Clock */
|
|
uint8_t const SPI_SCK_PIN = 13;
|
|
//------------------------------------------------------------------------------
|
|
#elif defined(__AVR_ATmega1280__)\
|
|
|| defined(__AVR_ATmega2560__)
|
|
// pins for Arduino Mega
|
|
uint8_t const SPI_SS_PIN = 53;
|
|
uint8_t const SPI_MOSI_PIN = 51;
|
|
uint8_t const SPI_MISO_PIN = 50;
|
|
uint8_t const SPI_SCK_PIN = 52;
|
|
//------------------------------------------------------------------------------
|
|
#elif defined(__AVR_ATmega644P__)\
|
|
|| defined(__AVR_ATmega644__)\
|
|
|| defined(__AVR_ATmega1284P__)
|
|
// pins for Sanguino
|
|
uint8_t const SPI_SS_PIN = 4;
|
|
uint8_t const SPI_MOSI_PIN = 5;
|
|
uint8_t const SPI_MISO_PIN = 6;
|
|
uint8_t const SPI_SCK_PIN = 7;
|
|
//------------------------------------------------------------------------------
|
|
#elif defined(__AVR_ATmega32U4__)
|
|
// pins for Teensy 2.0
|
|
uint8_t const SPI_SS_PIN = 8;
|
|
uint8_t const SPI_MOSI_PIN = 16;
|
|
uint8_t const SPI_MISO_PIN = 14;
|
|
uint8_t const SPI_SCK_PIN = 15;
|
|
//------------------------------------------------------------------------------
|
|
#elif defined(__AVR_AT90USB646__)\
|
|
|| defined(__AVR_AT90USB1286__)
|
|
// pins for Teensy++ 1.0 & 2.0
|
|
uint8_t const SPI_SS_PIN = 20;
|
|
uint8_t const SPI_MOSI_PIN = 22;
|
|
uint8_t const SPI_MISO_PIN = 23;
|
|
uint8_t const SPI_SCK_PIN = 21;
|
|
//------------------------------------------------------------------------------
|
|
#else // SPI pins
|
|
#error unknown CPU
|
|
#endif // SPI pins
|
|
//------------------------------------------------------------------------------
|
|
/**
|
|
* SD Chip Select pin
|
|
*
|
|
* Warning if this pin is redefined the hardware SS pin will be enabled
|
|
* as an output by init(). An avr processor will not function as an SPI
|
|
* master unless SS is set to output mode.
|
|
*
|
|
* For example to set SD_CHIP_SELECT_PIN to 8 for the SparkFun microSD shield:
|
|
* uint8_t const SD_CHIP_SELECT_PIN = 8;
|
|
*
|
|
* The default chip select pin for the SD card is SS.
|
|
*/
|
|
uint8_t const SD_CHIP_SELECT_PIN = SPI_SS_PIN;
|
|
//------------------------------------------------------------------------------
|
|
/** command timeout ms */
|
|
uint16_t const SD_COMMAND_TIMEOUT = 300;
|
|
/** init timeout ms */
|
|
uint16_t const SD_INIT_TIMEOUT = 2000;
|
|
/** read timeout ms */
|
|
uint16_t const SD_READ_TIMEOUT = 300;
|
|
/** write timeout ms */
|
|
uint16_t const SD_WRITE_TIMEOUT = 600;
|
|
//------------------------------------------------------------------------------
|
|
// error codes
|
|
/** Card did not go into SPI mode */
|
|
uint8_t const SD_ERROR_CMD0 = 1;
|
|
/** Card did not go ready */
|
|
uint8_t const SD_ERROR_ACMD41 = 2;
|
|
/** Write command not accepted */
|
|
uint8_t const SD_ERROR_CMD24 = 3;
|
|
/** Read command not accepted */
|
|
uint8_t const SD_ERROR_CMD17 = 4;
|
|
/** timeout waiting for read data */
|
|
uint8_t const SD_ERROR_READ_TIMEOUT = 5;
|
|
/** write error occurred */
|
|
uint8_t const SD_ERROR_WRITE_RESPONSE = 6;
|
|
/** timeout waiting for write status */
|
|
uint8_t const SD_ERROR_WRITE_TIMEOUT = 7;
|
|
/** attempt to write block zero */
|
|
uint8_t const SD_ERROR_BLOCK_ZERO_WRITE = 8;
|
|
/** card returned an error to a CMD13 status check after a write */
|
|
uint8_t const SD_ERROR_WRITE_PROGRAMMING = 9;
|
|
/** invalid SPI speed in init() call */
|
|
uint8_t const SD_ERROR_SPI_SPEED = 10;
|
|
//------------------------------------------------------------------------------
|
|
// SD command codes
|
|
/** SEND OPERATING CONDITIONS */
|
|
uint8_t const ACMD41 = 0X29;
|
|
/** GO_IDLE_STATE - init card in spi mode if CS low */
|
|
uint8_t const CMD0 = 0X00;
|
|
/** SEND_CSD - Card Specific Data */
|
|
uint8_t const CMD9 = 0X09;
|
|
/** SEND_CID - Card IDentification */
|
|
uint8_t const CMD10 = 0X0A;
|
|
/** SEND_STATUS - read the card status register */
|
|
uint8_t const CMD13 = 0X0D;
|
|
/** READ_BLOCK */
|
|
uint8_t const CMD17 = 0X11;
|
|
/** WRITE_BLOCK */
|
|
uint8_t const CMD24 = 0X18;
|
|
/** APP_CMD - escape for application specific command */
|
|
uint8_t const CMD55 = 0X37;
|
|
//------------------------------------------------------------------------------
|
|
/**
|
|
* \class SdCard
|
|
* \brief Hardware access class for SD flash cards
|
|
*
|
|
* Supports raw access to a standard SD flash memory card.
|
|
*
|
|
*/
|
|
class SdCard {
|
|
public:
|
|
/** Code for a SD error. See SdCard.h for definitions. */
|
|
uint8_t errorCode;
|
|
/** Data that may be helpful in determining the cause of an error */
|
|
uint8_t errorData;
|
|
uint32_t cardSize(void);
|
|
/**
|
|
* Initialize an SD flash memory card with default clock rate and chip
|
|
* select pin. See SdCard::init(uint8_t sckRateID, uint8_t chipSelectPin).
|
|
*/
|
|
uint8_t init(void) {
|
|
return init(0, SD_CHIP_SELECT_PIN);
|
|
}
|
|
/**
|
|
* Initialize an SD flash memory card with the selected SPI clock rate
|
|
* and the default SD chip select pin.
|
|
* See SdCard::init(uint8_t slow, uint8_t chipSelectPin).
|
|
*/
|
|
uint8_t init(uint8_t speed) {
|
|
return init(speed, SD_CHIP_SELECT_PIN);
|
|
}
|
|
uint8_t init(uint8_t speed, uint8_t chipselectPin);
|
|
uint8_t readBlock(uint32_t block, uint8_t* dst);
|
|
/** Read the CID register which contains info about the card.
|
|
* This includes Manufacturer ID, OEM ID, product name, version,
|
|
* serial number, and manufacturing date. */
|
|
uint8_t readCID(cid_t* cid) {
|
|
return readReg(CMD10, cid);
|
|
}
|
|
uint8_t writeBlock(uint32_t block, const uint8_t* src);
|
|
private:
|
|
uint8_t cardAcmd(uint8_t cmd, uint32_t arg);
|
|
uint8_t cardCommand(uint8_t cmd, uint32_t arg);
|
|
uint8_t chipSelectPin_;
|
|
uint8_t speed_;
|
|
void chipSelectHigh(void);
|
|
void chipSelectLow(void);
|
|
void error(uint8_t code, uint8_t data);
|
|
void error(uint8_t code);
|
|
uint8_t readReg(uint8_t cmd, void* buf);
|
|
uint8_t readTransfer(uint8_t* dst, uint16_t count);
|
|
};
|
|
#endif // SdCard_h
|