mirror of
https://github.com/arduino/Arduino.git
synced 2024-12-10 21:24:12 +01:00
147 lines
4.6 KiB
C++
147 lines
4.6 KiB
C++
/*
|
|
Cosm sensor client with Strings
|
|
|
|
This sketch connects an analog sensor to Cosm (http://www.cosm.com)
|
|
using a Wiznet Ethernet shield. You can use the Arduino Ethernet shield, or
|
|
the Adafruit Ethernet shield, either one will work, as long as it's got
|
|
a Wiznet Ethernet module on board.
|
|
|
|
This example has been updated to use version 2.0 of the Cosm.com API.
|
|
To make it work, create a feed with two datastreams, and give them the IDs
|
|
sensor1 and sensor2. Or change the code below to match your feed.
|
|
|
|
This example uses the String library, which is part of the Arduino core from
|
|
version 0019.
|
|
|
|
Circuit:
|
|
* Analog sensor attached to analog in 0
|
|
* Ethernet shield attached to pins 10, 11, 12, 13
|
|
|
|
created 15 March 2010
|
|
updated 14 May 2012
|
|
by Tom Igoe with input from Usman Haque and Joe Saavedra
|
|
|
|
http://arduino.cc/en/Tutorial/CosmClientString
|
|
This code is in the public domain.
|
|
|
|
*/
|
|
|
|
#include <SPI.h>
|
|
#include <Ethernet.h>
|
|
|
|
|
|
#define APIKEY "YOUR API KEY GOES HERE" // replace your Cosm api key here
|
|
#define FEEDID 00000 // replace your feed ID
|
|
#define USERAGENT "My Project" // user agent is the project name
|
|
|
|
// assign a MAC address for the ethernet controller.
|
|
// fill in your address here:
|
|
byte mac[] = {
|
|
0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};
|
|
|
|
// fill in an available IP address on your network here,
|
|
// for manual configuration:
|
|
IPAddress ip(10,0,1,20);
|
|
|
|
// initialize the library instance:
|
|
EthernetClient client;
|
|
|
|
// if you don't want to use DNS (and reduce your sketch size)
|
|
// use the numeric IP instead of the name for the server:
|
|
//IPAddress server(216,52,233,121); // numeric IP for api.cosm.com
|
|
char server[] = "api.cosm.com"; // name address for Cosm API
|
|
|
|
unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds
|
|
boolean lastConnected = false; // state of the connection last time through the main loop
|
|
const unsigned long postingInterval = 10L*1000L; // delay between updates to Cosm.com
|
|
// the "L" is needed to use long type numbers
|
|
void setup() {
|
|
// start serial port:
|
|
Serial.begin(9600);
|
|
// give the ethernet module time to boot up:
|
|
delay(1000);
|
|
// start the Ethernet connection:
|
|
if (Ethernet.begin(mac) == 0) {
|
|
Serial.println("Failed to configure Ethernet using DHCP");
|
|
// DHCP failed, so use a fixed IP address:
|
|
Ethernet.begin(mac, ip);
|
|
}
|
|
}
|
|
|
|
void loop() {
|
|
// read the analog sensor:
|
|
int sensorReading = analogRead(A0);
|
|
// convert the data to a String to send it:
|
|
|
|
String dataString = "sensor1,";
|
|
dataString += sensorReading;
|
|
|
|
// you can append multiple readings to this String if your
|
|
// Cosm feed is set up to handle multiple values:
|
|
int otherSensorReading = analogRead(A1);
|
|
dataString += "\nsensor2,";
|
|
dataString += otherSensorReading;
|
|
|
|
// if there's incoming data from the net connection.
|
|
// send it out the serial port. This is for debugging
|
|
// purposes only:
|
|
if (client.available()) {
|
|
char c = client.read();
|
|
Serial.print(c);
|
|
}
|
|
|
|
// if there's no net connection, but there was one last time
|
|
// through the loop, then stop the client:
|
|
if (!client.connected() && lastConnected) {
|
|
Serial.println();
|
|
Serial.println("disconnecting.");
|
|
client.stop();
|
|
}
|
|
|
|
// if you're not connected, and ten seconds have passed since
|
|
// your last connection, then connect again and send data:
|
|
if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) {
|
|
sendData(dataString);
|
|
}
|
|
// store the state of the connection for next time through
|
|
// the loop:
|
|
lastConnected = client.connected();
|
|
}
|
|
|
|
// this method makes a HTTP connection to the server:
|
|
void sendData(String thisData) {
|
|
// if there's a successful connection:
|
|
if (client.connect(server, 80)) {
|
|
Serial.println("connecting...");
|
|
// send the HTTP PUT request:
|
|
client.print("PUT /v2/feeds/");
|
|
client.print(FEEDID);
|
|
client.println(".csv HTTP/1.1");
|
|
client.println("Host: api.cosm.com");
|
|
client.print("X-ApiKey: ");
|
|
client.println(APIKEY);
|
|
client.print("User-Agent: ");
|
|
client.println(USERAGENT);
|
|
client.print("Content-Length: ");
|
|
client.println(thisData.length());
|
|
|
|
// last pieces of the HTTP PUT request:
|
|
client.println("Content-Type: text/csv");
|
|
client.println("Connection: close");
|
|
client.println();
|
|
|
|
// here's the actual content of the PUT request:
|
|
client.println(thisData);
|
|
}
|
|
else {
|
|
// if you couldn't make a connection:
|
|
Serial.println("connection failed");
|
|
Serial.println();
|
|
Serial.println("disconnecting.");
|
|
client.stop();
|
|
}
|
|
// note the time that the connection was made or attempted:
|
|
lastConnectionTime = millis();
|
|
}
|
|
|