1
0
mirror of https://github.com/arduino/Arduino.git synced 2024-12-04 15:24:12 +01:00
Arduino/hardware/arduino/bootloaders/optiboot/optiboot_atmega328.lst
David A. Mellis 94168bd0f4 Fix to optiboot infinite loop problem.
Explicitly setting R1 to 0 so that the watchdog timer is properly initializing, preventing it from timing out and resetting the processor.

http://code.google.com/p/optiboot/issues/detail?id=26
http://code.google.com/p/arduino/issues/detail?id=446
2011-01-15 13:29:08 +00:00

525 lines
16 KiB
Plaintext

optiboot_atmega328.elf: file format elf32-avr
Sections:
Idx Name Size VMA LMA File off Algn
0 .text 000001ee 00007e00 00007e00 00000054 2**1
CONTENTS, ALLOC, LOAD, READONLY, CODE
1 .debug_aranges 00000028 00000000 00000000 00000242 2**0
CONTENTS, READONLY, DEBUGGING
2 .debug_pubnames 0000006a 00000000 00000000 0000026a 2**0
CONTENTS, READONLY, DEBUGGING
3 .debug_info 00000269 00000000 00000000 000002d4 2**0
CONTENTS, READONLY, DEBUGGING
4 .debug_abbrev 00000196 00000000 00000000 0000053d 2**0
CONTENTS, READONLY, DEBUGGING
5 .debug_line 000003db 00000000 00000000 000006d3 2**0
CONTENTS, READONLY, DEBUGGING
6 .debug_frame 00000090 00000000 00000000 00000ab0 2**2
CONTENTS, READONLY, DEBUGGING
7 .debug_str 00000124 00000000 00000000 00000b40 2**0
CONTENTS, READONLY, DEBUGGING
8 .debug_loc 000001d1 00000000 00000000 00000c64 2**0
CONTENTS, READONLY, DEBUGGING
9 .debug_ranges 00000068 00000000 00000000 00000e35 2**0
CONTENTS, READONLY, DEBUGGING
Disassembly of section .text:
00007e00 <main>:
#ifdef VIRTUAL_BOOT_PARTITION
#define rstVect (*(uint16_t*)(0x204))
#define wdtVect (*(uint16_t*)(0x206))
#endif
/* main program starts here */
int main(void) {
7e00: 11 24 eor r1, r1
uint8_t ch;
#if LED_START_FLASHES > 0
// Set up Timer 1 for timeout counter
TCCR1B = _BV(CS12) | _BV(CS10); // div 1024
7e02: 85 e0 ldi r24, 0x05 ; 5
7e04: 80 93 81 00 sts 0x0081, r24
#endif
#ifndef SOFT_UART
UCSR0A = _BV(U2X0); //Double speed mode USART0
7e08: 82 e0 ldi r24, 0x02 ; 2
7e0a: 80 93 c0 00 sts 0x00C0, r24
UCSR0B = _BV(RXEN0) | _BV(TXEN0);
7e0e: 88 e1 ldi r24, 0x18 ; 24
7e10: 80 93 c1 00 sts 0x00C1, r24
UCSR0C = _BV(UCSZ00) | _BV(UCSZ01);
7e14: 86 e0 ldi r24, 0x06 ; 6
7e16: 80 93 c2 00 sts 0x00C2, r24
UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 );
7e1a: 80 e1 ldi r24, 0x10 ; 16
7e1c: 80 93 c4 00 sts 0x00C4, r24
#endif
// Adaboot no-wait mod
ch = MCUSR;
7e20: 84 b7 in r24, 0x34 ; 52
MCUSR = 0;
7e22: 14 be out 0x34, r1 ; 52
if (!(ch & _BV(EXTRF))) appStart();
7e24: 81 ff sbrs r24, 1
7e26: d0 d0 rcall .+416 ; 0x7fc8 <appStart>
// Set up watchdog to trigger after 500ms
watchdogConfig(WATCHDOG_500MS);
7e28: 8d e0 ldi r24, 0x0D ; 13
7e2a: c8 d0 rcall .+400 ; 0x7fbc <watchdogConfig>
/* Set LED pin as output */
LED_DDR |= _BV(LED);
7e2c: 25 9a sbi 0x04, 5 ; 4
7e2e: 86 e0 ldi r24, 0x06 ; 6
}
#if LED_START_FLASHES > 0
void flash_led(uint8_t count) {
do {
TCNT1 = -(F_CPU/(1024*16));
7e30: 20 e3 ldi r18, 0x30 ; 48
7e32: 3c ef ldi r19, 0xFC ; 252
TIFR1 = _BV(TOV1);
7e34: 91 e0 ldi r25, 0x01 ; 1
}
#if LED_START_FLASHES > 0
void flash_led(uint8_t count) {
do {
TCNT1 = -(F_CPU/(1024*16));
7e36: 30 93 85 00 sts 0x0085, r19
7e3a: 20 93 84 00 sts 0x0084, r18
TIFR1 = _BV(TOV1);
7e3e: 96 bb out 0x16, r25 ; 22
while(!(TIFR1 & _BV(TOV1)));
7e40: b0 9b sbis 0x16, 0 ; 22
7e42: fe cf rjmp .-4 ; 0x7e40 <main+0x40>
LED_PIN |= _BV(LED);
7e44: 1d 9a sbi 0x03, 5 ; 3
return getch();
}
// Watchdog functions. These are only safe with interrupts turned off.
void watchdogReset() {
__asm__ __volatile__ (
7e46: a8 95 wdr
TCNT1 = -(F_CPU/(1024*16));
TIFR1 = _BV(TOV1);
while(!(TIFR1 & _BV(TOV1)));
LED_PIN |= _BV(LED);
watchdogReset();
} while (--count);
7e48: 81 50 subi r24, 0x01 ; 1
7e4a: a9 f7 brne .-22 ; 0x7e36 <main+0x36>
/* get character from UART */
ch = getch();
if(ch == STK_GET_PARAMETER) {
// GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy
getNch(1);
7e4c: dd 24 eor r13, r13
7e4e: d3 94 inc r13
boot_page_fill((uint16_t)(void*)addrPtr,a);
addrPtr += 2;
} while (--ch);
// Write from programming buffer
boot_page_write((uint16_t)(void*)address);
7e50: a5 e0 ldi r26, 0x05 ; 5
7e52: ea 2e mov r14, r26
boot_spm_busy_wait();
#if defined(RWWSRE)
// Reenable read access to flash
boot_rww_enable();
7e54: f1 e1 ldi r31, 0x11 ; 17
7e56: ff 2e mov r15, r31
#endif
/* Forever loop */
for (;;) {
/* get character from UART */
ch = getch();
7e58: a4 d0 rcall .+328 ; 0x7fa2 <getch>
if(ch == STK_GET_PARAMETER) {
7e5a: 81 34 cpi r24, 0x41 ; 65
7e5c: 21 f4 brne .+8 ; 0x7e66 <main+0x66>
// GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy
getNch(1);
7e5e: 81 e0 ldi r24, 0x01 ; 1
7e60: be d0 rcall .+380 ; 0x7fde <verifySpace+0xc>
putch(0x03);
7e62: 83 e0 ldi r24, 0x03 ; 3
7e64: 24 c0 rjmp .+72 ; 0x7eae <main+0xae>
}
else if(ch == STK_SET_DEVICE) {
7e66: 82 34 cpi r24, 0x42 ; 66
7e68: 11 f4 brne .+4 ; 0x7e6e <main+0x6e>
// SET DEVICE is ignored
getNch(20);
7e6a: 84 e1 ldi r24, 0x14 ; 20
7e6c: 03 c0 rjmp .+6 ; 0x7e74 <main+0x74>
}
else if(ch == STK_SET_DEVICE_EXT) {
7e6e: 85 34 cpi r24, 0x45 ; 69
7e70: 19 f4 brne .+6 ; 0x7e78 <main+0x78>
// SET DEVICE EXT is ignored
getNch(5);
7e72: 85 e0 ldi r24, 0x05 ; 5
7e74: b4 d0 rcall .+360 ; 0x7fde <verifySpace+0xc>
7e76: 8a c0 rjmp .+276 ; 0x7f8c <main+0x18c>
}
else if(ch == STK_LOAD_ADDRESS) {
7e78: 85 35 cpi r24, 0x55 ; 85
7e7a: a1 f4 brne .+40 ; 0x7ea4 <main+0xa4>
// LOAD ADDRESS
address = getch();
7e7c: 92 d0 rcall .+292 ; 0x7fa2 <getch>
7e7e: 08 2f mov r16, r24
7e80: 10 e0 ldi r17, 0x00 ; 0
7e82: 10 93 01 02 sts 0x0201, r17
7e86: 00 93 00 02 sts 0x0200, r16
address = (address & 0xff) | (getch() << 8);
7e8a: 8b d0 rcall .+278 ; 0x7fa2 <getch>
7e8c: 90 e0 ldi r25, 0x00 ; 0
7e8e: 98 2f mov r25, r24
7e90: 88 27 eor r24, r24
7e92: 80 2b or r24, r16
7e94: 91 2b or r25, r17
address += address; // Convert from word address to byte address
7e96: 88 0f add r24, r24
7e98: 99 1f adc r25, r25
7e9a: 90 93 01 02 sts 0x0201, r25
7e9e: 80 93 00 02 sts 0x0200, r24
7ea2: 73 c0 rjmp .+230 ; 0x7f8a <main+0x18a>
verifySpace();
}
else if(ch == STK_UNIVERSAL) {
7ea4: 86 35 cpi r24, 0x56 ; 86
7ea6: 29 f4 brne .+10 ; 0x7eb2 <main+0xb2>
// UNIVERSAL command is ignored
getNch(4);
7ea8: 84 e0 ldi r24, 0x04 ; 4
7eaa: 99 d0 rcall .+306 ; 0x7fde <verifySpace+0xc>
putch(0x00);
7eac: 80 e0 ldi r24, 0x00 ; 0
7eae: 71 d0 rcall .+226 ; 0x7f92 <putch>
7eb0: 6d c0 rjmp .+218 ; 0x7f8c <main+0x18c>
}
/* Write memory, length is big endian and is in bytes */
else if(ch == STK_PROG_PAGE) {
7eb2: 84 36 cpi r24, 0x64 ; 100
7eb4: 09 f0 breq .+2 ; 0x7eb8 <main+0xb8>
7eb6: 43 c0 rjmp .+134 ; 0x7f3e <main+0x13e>
// PROGRAM PAGE - we support flash programming only, not EEPROM
uint8_t *bufPtr;
uint16_t addrPtr;
getLen();
7eb8: 7c d0 rcall .+248 ; 0x7fb2 <getLen>
// Immediately start page erase - this will 4.5ms
boot_page_erase((uint16_t)(void*)address);
7eba: e0 91 00 02 lds r30, 0x0200
7ebe: f0 91 01 02 lds r31, 0x0201
7ec2: 83 e0 ldi r24, 0x03 ; 3
7ec4: 80 93 57 00 sts 0x0057, r24
7ec8: e8 95 spm
7eca: c0 e0 ldi r28, 0x00 ; 0
7ecc: d1 e0 ldi r29, 0x01 ; 1
// While that is going on, read in page contents
bufPtr = buff;
do *bufPtr++ = getch();
7ece: 69 d0 rcall .+210 ; 0x7fa2 <getch>
7ed0: 89 93 st Y+, r24
while (--length);
7ed2: 80 91 02 02 lds r24, 0x0202
7ed6: 81 50 subi r24, 0x01 ; 1
7ed8: 80 93 02 02 sts 0x0202, r24
7edc: 88 23 and r24, r24
7ede: b9 f7 brne .-18 ; 0x7ece <main+0xce>
// Read command terminator, start reply
verifySpace();
7ee0: 78 d0 rcall .+240 ; 0x7fd2 <verifySpace>
// If only a partial page is to be programmed, the erase might not be complete.
// So check that here
boot_spm_busy_wait();
7ee2: 07 b6 in r0, 0x37 ; 55
7ee4: 00 fc sbrc r0, 0
7ee6: fd cf rjmp .-6 ; 0x7ee2 <main+0xe2>
}
#endif
// Copy buffer into programming buffer
bufPtr = buff;
addrPtr = (uint16_t)(void*)address;
7ee8: 40 91 00 02 lds r20, 0x0200
7eec: 50 91 01 02 lds r21, 0x0201
7ef0: a0 e0 ldi r26, 0x00 ; 0
7ef2: b1 e0 ldi r27, 0x01 ; 1
ch = SPM_PAGESIZE / 2;
do {
uint16_t a;
a = *bufPtr++;
7ef4: 2c 91 ld r18, X
7ef6: 30 e0 ldi r19, 0x00 ; 0
a |= (*bufPtr++) << 8;
7ef8: 11 96 adiw r26, 0x01 ; 1
7efa: 8c 91 ld r24, X
7efc: 11 97 sbiw r26, 0x01 ; 1
7efe: 90 e0 ldi r25, 0x00 ; 0
7f00: 98 2f mov r25, r24
7f02: 88 27 eor r24, r24
7f04: 82 2b or r24, r18
7f06: 93 2b or r25, r19
#ifdef VIRTUAL_BOOT_PARTITION
#define rstVect (*(uint16_t*)(0x204))
#define wdtVect (*(uint16_t*)(0x206))
#endif
/* main program starts here */
int main(void) {
7f08: 12 96 adiw r26, 0x02 ; 2
ch = SPM_PAGESIZE / 2;
do {
uint16_t a;
a = *bufPtr++;
a |= (*bufPtr++) << 8;
boot_page_fill((uint16_t)(void*)addrPtr,a);
7f0a: fa 01 movw r30, r20
7f0c: 0c 01 movw r0, r24
7f0e: d0 92 57 00 sts 0x0057, r13
7f12: e8 95 spm
7f14: 11 24 eor r1, r1
addrPtr += 2;
7f16: 4e 5f subi r20, 0xFE ; 254
7f18: 5f 4f sbci r21, 0xFF ; 255
} while (--ch);
7f1a: f1 e0 ldi r31, 0x01 ; 1
7f1c: a0 38 cpi r26, 0x80 ; 128
7f1e: bf 07 cpc r27, r31
7f20: 49 f7 brne .-46 ; 0x7ef4 <main+0xf4>
// Write from programming buffer
boot_page_write((uint16_t)(void*)address);
7f22: e0 91 00 02 lds r30, 0x0200
7f26: f0 91 01 02 lds r31, 0x0201
7f2a: e0 92 57 00 sts 0x0057, r14
7f2e: e8 95 spm
boot_spm_busy_wait();
7f30: 07 b6 in r0, 0x37 ; 55
7f32: 00 fc sbrc r0, 0
7f34: fd cf rjmp .-6 ; 0x7f30 <main+0x130>
#if defined(RWWSRE)
// Reenable read access to flash
boot_rww_enable();
7f36: f0 92 57 00 sts 0x0057, r15
7f3a: e8 95 spm
7f3c: 27 c0 rjmp .+78 ; 0x7f8c <main+0x18c>
#endif
}
/* Read memory block mode, length is big endian. */
else if(ch == STK_READ_PAGE) {
7f3e: 84 37 cpi r24, 0x74 ; 116
7f40: b9 f4 brne .+46 ; 0x7f70 <main+0x170>
// READ PAGE - we only read flash
getLen();
7f42: 37 d0 rcall .+110 ; 0x7fb2 <getLen>
verifySpace();
7f44: 46 d0 rcall .+140 ; 0x7fd2 <verifySpace>
else ch = pgm_read_byte_near(address);
address++;
putch(ch);
} while (--length);
#else
do putch(pgm_read_byte_near(address++));
7f46: e0 91 00 02 lds r30, 0x0200
7f4a: f0 91 01 02 lds r31, 0x0201
7f4e: 31 96 adiw r30, 0x01 ; 1
7f50: f0 93 01 02 sts 0x0201, r31
7f54: e0 93 00 02 sts 0x0200, r30
7f58: 31 97 sbiw r30, 0x01 ; 1
7f5a: e4 91 lpm r30, Z+
7f5c: 8e 2f mov r24, r30
7f5e: 19 d0 rcall .+50 ; 0x7f92 <putch>
while (--length);
7f60: 80 91 02 02 lds r24, 0x0202
7f64: 81 50 subi r24, 0x01 ; 1
7f66: 80 93 02 02 sts 0x0202, r24
7f6a: 88 23 and r24, r24
7f6c: 61 f7 brne .-40 ; 0x7f46 <main+0x146>
7f6e: 0e c0 rjmp .+28 ; 0x7f8c <main+0x18c>
#endif
}
/* Get device signature bytes */
else if(ch == STK_READ_SIGN) {
7f70: 85 37 cpi r24, 0x75 ; 117
7f72: 39 f4 brne .+14 ; 0x7f82 <main+0x182>
// READ SIGN - return what Avrdude wants to hear
verifySpace();
7f74: 2e d0 rcall .+92 ; 0x7fd2 <verifySpace>
putch(SIGNATURE_0);
7f76: 8e e1 ldi r24, 0x1E ; 30
7f78: 0c d0 rcall .+24 ; 0x7f92 <putch>
putch(SIGNATURE_1);
7f7a: 85 e9 ldi r24, 0x95 ; 149
7f7c: 0a d0 rcall .+20 ; 0x7f92 <putch>
putch(SIGNATURE_2);
7f7e: 8f e0 ldi r24, 0x0F ; 15
7f80: 96 cf rjmp .-212 ; 0x7eae <main+0xae>
}
else if (ch == 'Q') {
7f82: 81 35 cpi r24, 0x51 ; 81
7f84: 11 f4 brne .+4 ; 0x7f8a <main+0x18a>
// Adaboot no-wait mod
watchdogConfig(WATCHDOG_16MS);
7f86: 88 e0 ldi r24, 0x08 ; 8
7f88: 19 d0 rcall .+50 ; 0x7fbc <watchdogConfig>
verifySpace();
}
else {
// This covers the response to commands like STK_ENTER_PROGMODE
verifySpace();
7f8a: 23 d0 rcall .+70 ; 0x7fd2 <verifySpace>
}
putch(STK_OK);
7f8c: 80 e1 ldi r24, 0x10 ; 16
7f8e: 01 d0 rcall .+2 ; 0x7f92 <putch>
7f90: 63 cf rjmp .-314 ; 0x7e58 <main+0x58>
00007f92 <putch>:
}
}
void putch(char ch) {
7f92: 98 2f mov r25, r24
#ifndef SOFT_UART
while (!(UCSR0A & _BV(UDRE0)));
7f94: 80 91 c0 00 lds r24, 0x00C0
7f98: 85 ff sbrs r24, 5
7f9a: fc cf rjmp .-8 ; 0x7f94 <putch+0x2>
UDR0 = ch;
7f9c: 90 93 c6 00 sts 0x00C6, r25
[uartBit] "I" (UART_TX_BIT)
:
"r25"
);
#endif
}
7fa0: 08 95 ret
00007fa2 <getch>:
return getch();
}
// Watchdog functions. These are only safe with interrupts turned off.
void watchdogReset() {
__asm__ __volatile__ (
7fa2: a8 95 wdr
[uartBit] "I" (UART_RX_BIT)
:
"r25"
);
#else
while(!(UCSR0A & _BV(RXC0)));
7fa4: 80 91 c0 00 lds r24, 0x00C0
7fa8: 87 ff sbrs r24, 7
7faa: fc cf rjmp .-8 ; 0x7fa4 <getch+0x2>
ch = UDR0;
7fac: 80 91 c6 00 lds r24, 0x00C6
#ifdef LED_DATA_FLASH
LED_PIN |= _BV(LED);
#endif
return ch;
}
7fb0: 08 95 ret
00007fb2 <getLen>:
} while (--count);
}
#endif
uint8_t getLen() {
getch();
7fb2: f7 df rcall .-18 ; 0x7fa2 <getch>
length = getch();
7fb4: f6 df rcall .-20 ; 0x7fa2 <getch>
7fb6: 80 93 02 02 sts 0x0202, r24
return getch();
}
7fba: f3 cf rjmp .-26 ; 0x7fa2 <getch>
00007fbc <watchdogConfig>:
"wdr\n"
);
}
void watchdogConfig(uint8_t x) {
WDTCSR = _BV(WDCE) | _BV(WDE);
7fbc: e0 e6 ldi r30, 0x60 ; 96
7fbe: f0 e0 ldi r31, 0x00 ; 0
7fc0: 98 e1 ldi r25, 0x18 ; 24
7fc2: 90 83 st Z, r25
WDTCSR = x;
7fc4: 80 83 st Z, r24
}
7fc6: 08 95 ret
00007fc8 <appStart>:
void appStart() {
watchdogConfig(WATCHDOG_OFF);
7fc8: 80 e0 ldi r24, 0x00 ; 0
7fca: f8 df rcall .-16 ; 0x7fbc <watchdogConfig>
__asm__ __volatile__ (
7fcc: ee 27 eor r30, r30
7fce: ff 27 eor r31, r31
7fd0: 09 94 ijmp
00007fd2 <verifySpace>:
do getch(); while (--count);
verifySpace();
}
void verifySpace() {
if (getch() != CRC_EOP) appStart();
7fd2: e7 df rcall .-50 ; 0x7fa2 <getch>
7fd4: 80 32 cpi r24, 0x20 ; 32
7fd6: 09 f0 breq .+2 ; 0x7fda <verifySpace+0x8>
7fd8: f7 df rcall .-18 ; 0x7fc8 <appStart>
putch(STK_INSYNC);
7fda: 84 e1 ldi r24, 0x14 ; 20
}
7fdc: da cf rjmp .-76 ; 0x7f92 <putch>
::[count] "M" (UART_B_VALUE)
);
}
#endif
void getNch(uint8_t count) {
7fde: 1f 93 push r17
7fe0: 18 2f mov r17, r24
00007fe2 <getNch>:
do getch(); while (--count);
7fe2: df df rcall .-66 ; 0x7fa2 <getch>
7fe4: 11 50 subi r17, 0x01 ; 1
7fe6: e9 f7 brne .-6 ; 0x7fe2 <getNch>
verifySpace();
7fe8: f4 df rcall .-24 ; 0x7fd2 <verifySpace>
}
7fea: 1f 91 pop r17
7fec: 08 95 ret