mirror of
https://github.com/arduino/Arduino.git
synced 2024-12-04 15:24:12 +01:00
143 lines
4.2 KiB
C++
143 lines
4.2 KiB
C++
/*
|
|
|
|
Udp NTP Client
|
|
|
|
Get the time from a Network Time Protocol (NTP) time server
|
|
Demonstrates use of UDP sendPacket and ReceivePacket
|
|
For more on NTP time servers and the messages needed to communicate with them,
|
|
see http://en.wikipedia.org/wiki/Network_Time_Protocol
|
|
|
|
created 4 Sep 2010
|
|
by Michael Margolis
|
|
modified 9 Apr 2012
|
|
by Tom Igoe
|
|
|
|
This code is in the public domain.
|
|
|
|
*/
|
|
|
|
#include <SPI.h>
|
|
#include <Ethernet.h>
|
|
#include <EthernetUdp.h>
|
|
|
|
// Enter a MAC address for your controller below.
|
|
// Newer Ethernet shields have a MAC address printed on a sticker on the shield
|
|
byte mac[] = {
|
|
0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED
|
|
};
|
|
|
|
unsigned int localPort = 8888; // local port to listen for UDP packets
|
|
|
|
char timeServer[] = "time.nist.gov"; // time.nist.gov NTP server
|
|
|
|
const int NTP_PACKET_SIZE = 48; // NTP time stamp is in the first 48 bytes of the message
|
|
|
|
byte packetBuffer[ NTP_PACKET_SIZE]; //buffer to hold incoming and outgoing packets
|
|
|
|
// A UDP instance to let us send and receive packets over UDP
|
|
EthernetUDP Udp;
|
|
|
|
void setup()
|
|
{
|
|
// Open serial communications and wait for port to open:
|
|
Serial.begin(9600);
|
|
while (!Serial) {
|
|
; // wait for serial port to connect. Needed for Leonardo only
|
|
}
|
|
|
|
|
|
// start Ethernet and UDP
|
|
if (Ethernet.begin(mac) == 0) {
|
|
Serial.println("Failed to configure Ethernet using DHCP");
|
|
// no point in carrying on, so do nothing forevermore:
|
|
for (;;)
|
|
;
|
|
}
|
|
Udp.begin(localPort);
|
|
}
|
|
|
|
void loop()
|
|
{
|
|
sendNTPpacket(timeServer); // send an NTP packet to a time server
|
|
|
|
// wait to see if a reply is available
|
|
delay(1000);
|
|
if ( Udp.parsePacket() ) {
|
|
// We've received a packet, read the data from it
|
|
Udp.read(packetBuffer, NTP_PACKET_SIZE); // read the packet into the buffer
|
|
|
|
//the timestamp starts at byte 40 of the received packet and is four bytes,
|
|
// or two words, long. First, esxtract the two words:
|
|
|
|
unsigned long highWord = word(packetBuffer[40], packetBuffer[41]);
|
|
unsigned long lowWord = word(packetBuffer[42], packetBuffer[43]);
|
|
// combine the four bytes (two words) into a long integer
|
|
// this is NTP time (seconds since Jan 1 1900):
|
|
unsigned long secsSince1900 = highWord << 16 | lowWord;
|
|
Serial.print("Seconds since Jan 1 1900 = " );
|
|
Serial.println(secsSince1900);
|
|
|
|
// now convert NTP time into everyday time:
|
|
Serial.print("Unix time = ");
|
|
// Unix time starts on Jan 1 1970. In seconds, that's 2208988800:
|
|
const unsigned long seventyYears = 2208988800UL;
|
|
// subtract seventy years:
|
|
unsigned long epoch = secsSince1900 - seventyYears;
|
|
// print Unix time:
|
|
Serial.println(epoch);
|
|
|
|
|
|
// print the hour, minute and second:
|
|
Serial.print("The UTC time is "); // UTC is the time at Greenwich Meridian (GMT)
|
|
Serial.print((epoch % 86400L) / 3600); // print the hour (86400 equals secs per day)
|
|
Serial.print(':');
|
|
if ( ((epoch % 3600) / 60) < 10 ) {
|
|
// In the first 10 minutes of each hour, we'll want a leading '0'
|
|
Serial.print('0');
|
|
}
|
|
Serial.print((epoch % 3600) / 60); // print the minute (3600 equals secs per minute)
|
|
Serial.print(':');
|
|
if ( (epoch % 60) < 10 ) {
|
|
// In the first 10 seconds of each minute, we'll want a leading '0'
|
|
Serial.print('0');
|
|
}
|
|
Serial.println(epoch % 60); // print the second
|
|
}
|
|
// wait ten seconds before asking for the time again
|
|
delay(10000);
|
|
}
|
|
|
|
// send an NTP request to the time server at the given address
|
|
unsigned long sendNTPpacket(char* address)
|
|
{
|
|
// set all bytes in the buffer to 0
|
|
memset(packetBuffer, 0, NTP_PACKET_SIZE);
|
|
// Initialize values needed to form NTP request
|
|
// (see URL above for details on the packets)
|
|
packetBuffer[0] = 0b11100011; // LI, Version, Mode
|
|
packetBuffer[1] = 0; // Stratum, or type of clock
|
|
packetBuffer[2] = 6; // Polling Interval
|
|
packetBuffer[3] = 0xEC; // Peer Clock Precision
|
|
// 8 bytes of zero for Root Delay & Root Dispersion
|
|
packetBuffer[12] = 49;
|
|
packetBuffer[13] = 0x4E;
|
|
packetBuffer[14] = 49;
|
|
packetBuffer[15] = 52;
|
|
|
|
// all NTP fields have been given values, now
|
|
// you can send a packet requesting a timestamp:
|
|
Udp.beginPacket(address, 123); //NTP requests are to port 123
|
|
Udp.write(packetBuffer, NTP_PACKET_SIZE);
|
|
Udp.endPacket();
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|