1
0
mirror of https://github.com/arduino/Arduino.git synced 2024-12-13 23:48:46 +01:00
Arduino/build/shared/examples/10.StarterKit_BasicKit/p15_HackingButtons/p15_HackingButtons.ino
Arturo Guadalupi 8f4cd17486 Added BasicKit name to examples folder
according to #3560 I added BasicKit after 10.StarterKit. / is not allowed
2015-07-23 15:18:03 +02:00

38 lines
818 B
C++

/*
Arduino Starter Kit example
Project 15 - Hacking Buttons
This sketch is written to accompany Project 15 in the
Arduino Starter Kit
Parts required:
batery powered component
220 ohm resistor
4N35 optocoupler
Created 18 September 2012
by Scott Fitzgerald
http://www.arduino.cc/starterKit
This example code is part of the public domain
*/
const int optoPin = 2; // the pin the optocoupler is connected to
void setup() {
// make the pin with the optocoupler an output
pinMode(optoPin, OUTPUT);
}
void loop() {
digitalWrite(optoPin, HIGH); // pull pin 2 HIGH, activating the optocoupler
delay(15); // give the optocoupler a moment to activate
digitalWrite(optoPin, LOW); // pull pin 2 low until you're ready to activate again
delay(21000); // wait for 21 seconds
}