1
0
mirror of https://github.com/arduino/Arduino.git synced 2024-12-10 21:24:12 +01:00
Arduino/hardware/arduino/firmwares
2011-11-12 12:57:30 +01:00
..
arduino-usbdfu Replacing Arduino VID / PID with the Atmel-supplied ones. 2010-09-28 09:31:10 -04:00
arduino-usbserial Added latest firmware for usbserial (not combined with DFU) 2011-11-12 12:57:30 +01:00
Arduino-COMBINED-dfu-usbserial-atmega16u2-Mega2560-Rev3.hex Added latest firmware for atmega16u2 on R3 boards 2011-11-11 11:38:04 -05:00
Arduino-COMBINED-dfu-usbserial-atmega16u2-MegaADK-Rev3.hex Added latest firmware for atmega16u2 on R3 boards 2011-11-11 11:38:04 -05:00
Arduino-COMBINED-dfu-usbserial-atmega16u2-Uno-Rev3.hex Added latest firmware for atmega16u2 on R3 boards 2011-11-11 11:38:04 -05:00
MEGA-dfu_and_usbserial_combined.hex Minor ATmega8U2 firmware update and new .hex files. 2010-12-04 14:28:56 -05:00
README.txt More information on USB VID/PIDs. 2010-09-28 17:19:07 -04:00
UNO-dfu_and_usbserial_combined.hex Minor ATmega8U2 firmware update and new .hex files. 2010-12-04 14:28:56 -05:00

Arduino Uno and Mega 2560 Firmwares for the ATmega8U2

This directory contains the firmwares used on the ATmega8U2 on the Arduino
Uno and Arduino Mega 2560.  The arduino-usbdfu directory contains the DFU
bootloader on the 8U2; the arduino-usbserial directory contains the actual
usb to serial firmware.  Both should be compiled against LUFA 100807.  The
two .hex files in this directory combine the dfu and serial firmwares into
a single file to burn onto the 8U2.  

To burn (Uno):
avrdude -p at90usb82 -F -P usb -c avrispmkii -U flash:w:UNO-dfu_and_usbserial_combined.hex -U lfuse:w:0xFF:m -U hfuse:w:0xD9:m -U efuse:w:0xF4:m -U lock:w:0x0F:m

To burn (Mega 2560):
avrdude -p at90usb82 -F -P usb -c avrispmkii -U flash:w:MEGA-dfu_and_usbserial_combined.hex -U lfuse:w:0xFF:m -U hfuse:w:0xD9:m -U efuse:w:0xF4:m -U lock:w:0x0F:m


Note on USB Vendor IDs (VID) and Product IDs (PID): The arduino-usbdfu
project uses Atmel's VID and MCU-specific PIDs to maintain compatibility
with their FLIP software.  The source code to the arduino-usbserial
project includes Atmel's VID and a PID donated by them to LUFA.  This
PID is used in LUFA's USBtoSerial project, which forms the basis for
arduino-usbserial.  According to the LUFA documentation, this VID/PID
combination is:

 "For use in testing of LUFA powered devices during development only,
 by non-commercial entities. All devices must accept collisions on this
 VID/PID range (from other in-development LUFA devices) to be resolved
 by using a unique release number in the Device Descriptor. No devices
 using this VID/PID combination may be released to the general public."

The production version of the arduino-usbserial firmware uses the
Arduino VID.  This is only for use with official Arduino hardware and
should not be used on other products.