mirror of
https://github.com/arduino/Arduino.git
synced 2024-12-04 15:24:12 +01:00
94 lines
2.5 KiB
C++
94 lines
2.5 KiB
C++
/*
|
|
Software serial multple serial test
|
|
|
|
Receives from the two software serial ports,
|
|
sends to the hardware serial port.
|
|
|
|
In order to listen on a software port, you call port.listen().
|
|
When using two software serial ports, you have to switch ports
|
|
by listen()ing on each one in turn. Pick a logical time to switch
|
|
ports, like the end of an expected transmission, or when the
|
|
buffer is empty. This example switches ports when there is nothing
|
|
more to read from a port
|
|
|
|
The circuit:
|
|
Two devices which communicate serially are needed.
|
|
* First serial device's TX attached to digital pin 2, RX to pin 3
|
|
* Second serial device's TX attached to digital pin 4, RX to pin 5
|
|
|
|
Note:
|
|
Not all pins on the Mega and Mega 2560 support change interrupts,
|
|
so only the following can be used for RX:
|
|
10, 11, 12, 13, 50, 51, 52, 53, 62, 63, 64, 65, 66, 67, 68, 69
|
|
|
|
Not all pins on the Leonardo support change interrupts,
|
|
so only the following can be used for RX:
|
|
8, 9, 10, 11, 14 (MISO), 15 (SCK), 16 (MOSI).
|
|
|
|
created 18 Apr. 2011
|
|
modified 25 May 2012
|
|
by Tom Igoe
|
|
based on Mikal Hart's twoPortRXExample
|
|
|
|
This example code is in the public domain.
|
|
|
|
*/
|
|
|
|
#include <SoftwareSerial.h>
|
|
// software serial #1: TX = digital pin 10, RX = digital pin 11
|
|
SoftwareSerial portOne(10,11);
|
|
|
|
// software serial #2: TX = digital pin 8, RX = digital pin 9
|
|
// on the Mega, use other pins instead, since 8 and 9 don't work on the Mega
|
|
SoftwareSerial portTwo(8,9);
|
|
|
|
void setup()
|
|
{
|
|
// Open serial communications and wait for port to open:
|
|
Serial.begin(9600);
|
|
while (!Serial) {
|
|
; // wait for serial port to connect. Needed for Leonardo only
|
|
}
|
|
|
|
|
|
// Start each software serial port
|
|
portOne.begin(9600);
|
|
portTwo.begin(9600);
|
|
}
|
|
|
|
void loop()
|
|
{
|
|
// By default, the last intialized port is listening.
|
|
// when you want to listen on a port, explicitly select it:
|
|
portOne.listen();
|
|
Serial.println("Data from port one:");
|
|
// while there is data coming in, read it
|
|
// and send to the hardware serial port:
|
|
while (portOne.available() > 0) {
|
|
char inByte = portOne.read();
|
|
Serial.write(inByte);
|
|
}
|
|
|
|
// blank line to separate data from the two ports:
|
|
Serial.println();
|
|
|
|
// Now listen on the second port
|
|
portTwo.listen();
|
|
// while there is data coming in, read it
|
|
// and send to the hardware serial port:
|
|
Serial.println("Data from port two:");
|
|
while (portTwo.available() > 0) {
|
|
char inByte = portTwo.read();
|
|
Serial.write(inByte);
|
|
}
|
|
|
|
// blank line to separate data from the two ports:
|
|
Serial.println();
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|