mirror of
https://github.com/arduino/Arduino.git
synced 2024-11-29 10:24:12 +01:00
55 lines
1.4 KiB
C++
55 lines
1.4 KiB
C++
/*
|
|
DHCP-based IP printer
|
|
|
|
This sketch uses the DHCP extensions to the Ethernet library
|
|
to get an IP address via DHCP and print the address obtained.
|
|
using an Arduino Wiznet Ethernet shield.
|
|
|
|
Circuit:
|
|
* Ethernet shield attached to pins 10, 11, 12, 13
|
|
|
|
created 12 April 2011
|
|
by Tom Igoe
|
|
|
|
*/
|
|
|
|
#include <SPI.h>
|
|
#include <Ethernet.h>
|
|
|
|
// Enter a MAC address for your controller below.
|
|
// Newer Ethernet shields have a MAC address printed on a sticker on the shield
|
|
byte mac[] = {
|
|
0x00, 0xAA, 0xBB, 0xCC, 0xDE, 0x02 };
|
|
|
|
// Initialize the Ethernet client library
|
|
// with the IP address and port of the server
|
|
// that you want to connect to (port 80 is default for HTTP):
|
|
EthernetClient client;
|
|
|
|
void setup() {
|
|
// start the serial library:
|
|
Serial.begin(9600);
|
|
// start the Ethernet connection:
|
|
Serial.println("Trying to get an IP address using DHCP");z
|
|
if (Ethernet.begin(mac) == 0) {
|
|
Serial.println("Failed to configure Ethernet using DHCP");
|
|
// no point in carrying on, so do nothing forevermore:
|
|
while(true);
|
|
}
|
|
// print your local IP address:
|
|
Serial.print("My IP address: ");
|
|
IPAddress myIPAddress = Ethernet.localIP();
|
|
for (byte thisByte = 0; thisByte < 4; thisByte++) {
|
|
// print the value of each byte of the IP address:
|
|
Serial.print(myIPAddress[thisByte], DEC);
|
|
Serial.print(".");
|
|
}
|
|
Serial.println();
|
|
}
|
|
|
|
void loop() {
|
|
|
|
}
|
|
|
|
|