mirror of
https://github.com/arduino/Arduino.git
synced 2024-11-30 11:24:12 +01:00
83 lines
4.2 KiB
C
Executable File
83 lines
4.2 KiB
C
Executable File
/*! \file edpdefs.h \brief Emerald Data Protocol Defines and Constants. */
|
|
//*****************************************************************************
|
|
//
|
|
// File Name : 'edpdefs.h'
|
|
// Title : Emerald Data Protocol Defines and Constants
|
|
// Author : Pascal Stang - Copyright (C) 2003
|
|
// Created : 09/08/2003
|
|
// Revised : 09/08/2003
|
|
// Version : 0.1
|
|
// Target MCU : Atmel AVR Series
|
|
// Editor Tabs : 4
|
|
//
|
|
// This code is distributed under the GNU Public License
|
|
// which can be found at http://www.gnu.org/licenses/gpl.txt
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#ifndef EDPDEFS_H
|
|
#define EDPDEFS_H
|
|
|
|
// **** Constant Definitions *****
|
|
// ---- Message Size, etc ----
|
|
// Standard defines for various message format parameters
|
|
#define I2C_MAX_COMMAND_LENGTH 127 // [param1]...[param127] (does not include Command, From
|
|
// or Chk) Note that this an absolute maximum,
|
|
// subsystems/nodes are free to set lower maximum lengths
|
|
// For versions pre rev5, this was fixed at 5.
|
|
#define I2C_MAX_DATA_PACKET_LENGTH 127 // Raw Data: [data1]...[data126][Chk] (includes Chk for
|
|
|
|
|
|
// ---- Communication OK (value all uppercase ('A'-'Z')
|
|
#define EDP_RESP_ACK 'A' // indicates the command (to_send) was sent but has no return value.
|
|
#define EDP_RESP_DATA_REPLY 'R' // command valid and has return, examine reply and length for details
|
|
|
|
// ---- Communication Error (values all lowercase ('a'-'z'))
|
|
#define EDP_RESP_UNKWN_CMD 'u' // given command is unrecognized by the subsystem at that address
|
|
#define EDP_RESP_CMD_CHK_ERROR 'c' // checksum error sending command
|
|
#define EDP_RESP_DATA_CHK_ERROR 'd' // checksum error receiving data
|
|
#define EDP_RESP_SEQUENCE_ERROR 's' // read/write out of order
|
|
#define EDP_RESP_READ_BEFORE_WRITE 'b' // requested read before writting associated Command
|
|
#define EDP_RESP_TOO_LONG 'l' // The command sent exceeds the maximum command length for node
|
|
#define EDP_RESP_TOO_FEW_PARAMS 'p' // The command sent has too few parameters
|
|
#define EDP_RESP_INCORRECT_PARAM 'i' // Parameters are incorrect (but there are the right number)
|
|
#define EDP_RESP_BUSY 'b' // The subsystem is still alive, but too busy to reply (AVOID USING)
|
|
#define EDP_RESP_NOT_ALLOWED 'n' // The command is recognized, but not allowed in the current
|
|
// operating mode. Try another command, or try again later
|
|
#define EDP_RESP_OTHER_ERROR 'e' // unspecified EDP/I2C error
|
|
|
|
// ---- Check Sum ----
|
|
/* The Checksum that is used is a rolling 8-bit sum from the [From] to the last parameter byte of a command
|
|
packet and from the [Length] to the last data byte of a Data packet. This sum is then 1-complemented
|
|
(~, not) and passed as [Chk]. This prevents a series of 0x00 replys from passing the correct check sum.
|
|
Because of the inversion, a packet with all zeros should have a checksum of 0xFF.
|
|
|
|
The other nice feature of this checksum, is that no matter what the data is, if you add the checksum
|
|
([Chk]) to the final sum, you should get 0xFF.
|
|
|
|
To make it even cleaner, you can start the rolling checksum at 0x01 such that when you add in all of the
|
|
data bytes and the [Chk] byte, you get 0x00. This effectively makes the whole operation a twos complement
|
|
*/
|
|
#define EDP_CHECKSUM_INIT 0x01
|
|
|
|
// -------- Reserved I2C commands ---------
|
|
// Define a short list of reserved commands. Subsystems can choose whether or
|
|
// not to implement these commands, but if they are implemented, they must
|
|
// function as described below.
|
|
|
|
//Reserved Commands
|
|
#define EDP_CMD_SET_TIME ':' //0x3A Set the subsystem time, realtime.h format
|
|
#define EDP_CMD_RESERVED_1 ';' //0x3B Reserved for future command
|
|
#define EDP_CMD_ROM_WRITE '<' //0x3C Write to program ROM (uploadable code)
|
|
#define EDP_CMD_RESERVED_2 '=' //0x3D Reserved for future command
|
|
#define EDP_CMD_MEM_READ '>' //0x3E Read from program ROM (check program)
|
|
#define EDP_CMD_HELP '?' //0x3F Return human readable help string(s)
|
|
#define EDP_CMD_STATUS '@' //0x40 Get subsystem status
|
|
|
|
|
|
#define I2C_DATA_CONTINUE_MASK 0x80 // If MSB of length is set, then the data continues beyond
|
|
// this data packet
|
|
|
|
|
|
#endif
|