mirror of
https://github.com/arduino/Arduino.git
synced 2024-12-04 15:24:12 +01:00
122 lines
3.5 KiB
C++
122 lines
3.5 KiB
C++
/*
|
|
JoystickMouseControl
|
|
|
|
Controls the mouse from a joystick on an Arduino Leonardo, Micro or Due.
|
|
Uses a pushbutton to turn on and off mouse control, and
|
|
a second pushbutton to click the left mouse button
|
|
|
|
Hardware:
|
|
* 2-axis joystick connected to pins A0 and A1
|
|
* pushbuttons connected to pin D2 and D3
|
|
|
|
The mouse movement is always relative. This sketch reads
|
|
two analog inputs that range from 0 to 1023 (or less on either end)
|
|
and translates them into ranges of -6 to 6.
|
|
The sketch assumes that the joystick resting values are around the
|
|
middle of the range, but that they vary within a threshold.
|
|
|
|
WARNING: When you use the Mouse.move() command, the Arduino takes
|
|
over your mouse! Make sure you have control before you use the command.
|
|
This sketch includes a pushbutton to toggle the mouse control state, so
|
|
you can turn on and off mouse control.
|
|
|
|
created 15 Sept 2011
|
|
updated 28 Mar 2012
|
|
by Tom Igoe
|
|
|
|
this code is in the public domain
|
|
|
|
*/
|
|
|
|
// set pin numbers for switch, joystick axes, and LED:
|
|
const int switchPin = 2; // switch to turn on and off mouse control
|
|
const int mouseButton = 3; // input pin for the mouse pushButton
|
|
const int xAxis = A0; // joystick X axis
|
|
const int yAxis = A1; // joystick Y axis
|
|
const int ledPin = 5; // Mouse control LED
|
|
|
|
// parameters for reading the joystick:
|
|
int range = 12; // output range of X or Y movement
|
|
int responseDelay = 5; // response delay of the mouse, in ms
|
|
int threshold = range / 4; // resting threshold
|
|
int center = range / 2; // resting position value
|
|
|
|
boolean mouseIsActive = false; // whether or not to control the mouse
|
|
int lastSwitchState = LOW; // previous switch state
|
|
|
|
void setup() {
|
|
pinMode(switchPin, INPUT); // the switch pin
|
|
pinMode(ledPin, OUTPUT); // the LED pin
|
|
// take control of the mouse:
|
|
Mouse.begin();
|
|
}
|
|
|
|
void loop() {
|
|
// read the switch:
|
|
int switchState = digitalRead(switchPin);
|
|
// if it's changed and it's high, toggle the mouse state:
|
|
if (switchState != lastSwitchState) {
|
|
if (switchState == HIGH) {
|
|
mouseIsActive = !mouseIsActive;
|
|
// turn on LED to indicate mouse state:
|
|
digitalWrite(ledPin, mouseIsActive);
|
|
}
|
|
}
|
|
// save switch state for next comparison:
|
|
lastSwitchState = switchState;
|
|
|
|
// read and scale the two axes:
|
|
int xReading = readAxis(A0);
|
|
int yReading = readAxis(A1);
|
|
|
|
// if the mouse control state is active, move the mouse:
|
|
if (mouseIsActive) {
|
|
Mouse.move(xReading, yReading, 0);
|
|
}
|
|
|
|
// read the mouse button and click or not click:
|
|
// if the mouse button is pressed:
|
|
if (digitalRead(mouseButton) == HIGH) {
|
|
// if the mouse is not pressed, press it:
|
|
if (!Mouse.isPressed(MOUSE_LEFT)) {
|
|
Mouse.press(MOUSE_LEFT);
|
|
}
|
|
}
|
|
// else the mouse button is not pressed:
|
|
else {
|
|
// if the mouse is pressed, release it:
|
|
if (Mouse.isPressed(MOUSE_LEFT)) {
|
|
Mouse.release(MOUSE_LEFT);
|
|
}
|
|
}
|
|
|
|
delay(responseDelay);
|
|
}
|
|
|
|
/*
|
|
reads an axis (0 or 1 for x or y) and scales the
|
|
analog input range to a range from 0 to <range>
|
|
*/
|
|
|
|
int readAxis(int thisAxis) {
|
|
// read the analog input:
|
|
int reading = analogRead(thisAxis);
|
|
|
|
// map the reading from the analog input range to the output range:
|
|
reading = map(reading, 0, 1023, 0, range);
|
|
|
|
// if the output reading is outside from the
|
|
// rest position threshold, use it:
|
|
int distance = reading - center;
|
|
|
|
if (abs(distance) < threshold) {
|
|
distance = 0;
|
|
}
|
|
|
|
// return the distance for this axis:
|
|
return distance;
|
|
}
|
|
|
|
|
|
|