mirror of
https://github.com/arduino/Arduino.git
synced 2024-12-04 15:24:12 +01:00
35777612c0
All examples in /build/shared/examples/ and /libraries/ have had their extensions changed to .ino
85 lines
2.5 KiB
C++
85 lines
2.5 KiB
C++
/* Ping))) Sensor
|
|
|
|
This sketch reads a PING))) ultrasonic rangefinder and returns the
|
|
distance to the closest object in range. To do this, it sends a pulse
|
|
to the sensor to initiate a reading, then listens for a pulse
|
|
to return. The length of the returning pulse is proportional to
|
|
the distance of the object from the sensor.
|
|
|
|
The circuit:
|
|
* +V connection of the PING))) attached to +5V
|
|
* GND connection of the PING))) attached to ground
|
|
* SIG connection of the PING))) attached to digital pin 7
|
|
|
|
http://www.arduino.cc/en/Tutorial/Ping
|
|
|
|
created 3 Nov 2008
|
|
by David A. Mellis
|
|
modified 30 Aug 2011
|
|
by Tom Igoe
|
|
|
|
This example code is in the public domain.
|
|
|
|
*/
|
|
|
|
// this constant won't change. It's the pin number
|
|
// of the sensor's output:
|
|
const int pingPin = 7;
|
|
|
|
void setup() {
|
|
// initialize serial communication:
|
|
Serial.begin(9600);
|
|
}
|
|
|
|
void loop()
|
|
{
|
|
// establish variables for duration of the ping,
|
|
// and the distance result in inches and centimeters:
|
|
long duration, inches, cm;
|
|
|
|
// The PING))) is triggered by a HIGH pulse of 2 or more microseconds.
|
|
// Give a short LOW pulse beforehand to ensure a clean HIGH pulse:
|
|
pinMode(pingPin, OUTPUT);
|
|
digitalWrite(pingPin, LOW);
|
|
delayMicroseconds(2);
|
|
digitalWrite(pingPin, HIGH);
|
|
delayMicroseconds(5);
|
|
digitalWrite(pingPin, LOW);
|
|
|
|
// The same pin is used to read the signal from the PING))): a HIGH
|
|
// pulse whose duration is the time (in microseconds) from the sending
|
|
// of the ping to the reception of its echo off of an object.
|
|
pinMode(pingPin, INPUT);
|
|
duration = pulseIn(pingPin, HIGH);
|
|
|
|
// convert the time into a distance
|
|
inches = microsecondsToInches(duration);
|
|
cm = microsecondsToCentimeters(duration);
|
|
|
|
Serial.print(inches);
|
|
Serial.print("in, ");
|
|
Serial.print(cm);
|
|
Serial.print("cm");
|
|
Serial.println();
|
|
|
|
delay(100);
|
|
}
|
|
|
|
long microsecondsToInches(long microseconds)
|
|
{
|
|
// According to Parallax's datasheet for the PING))), there are
|
|
// 73.746 microseconds per inch (i.e. sound travels at 1130 feet per
|
|
// second). This gives the distance travelled by the ping, outbound
|
|
// and return, so we divide by 2 to get the distance of the obstacle.
|
|
// See: http://www.parallax.com/dl/docs/prod/acc/28015-PING-v1.3.pdf
|
|
return microseconds / 74 / 2;
|
|
}
|
|
|
|
long microsecondsToCentimeters(long microseconds)
|
|
{
|
|
// The speed of sound is 340 m/s or 29 microseconds per centimeter.
|
|
// The ping travels out and back, so to find the distance of the
|
|
// object we take half of the distance travelled.
|
|
return microseconds / 29 / 2;
|
|
}
|