mirror of
https://github.com/arduino/Arduino.git
synced 2024-12-12 23:08:52 +01:00
293 lines
14 KiB
C
293 lines
14 KiB
C
/* %ATMEL_LICENCE% */
|
|
|
|
#ifndef _SAM3U1C_
|
|
#define _SAM3U1C_
|
|
|
|
/** \addtogroup SAM3U1C_definitions SAM3U1C definitions
|
|
This file defines all structures and symbols for SAM3U1C:
|
|
- registers and bitfields
|
|
- peripheral base address
|
|
- peripheral ID
|
|
- PIO definitions
|
|
*/
|
|
/*@{*/
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#ifndef __ASSEMBLY__
|
|
#include <stdint.h>
|
|
#ifndef __cplusplus
|
|
typedef volatile const uint32_t RoReg; /**< Read only 32-bit register (volatile const unsigned int) */
|
|
#else
|
|
typedef volatile uint32_t RoReg; /**< Read only 32-bit register (volatile const unsigned int) */
|
|
#endif
|
|
typedef volatile uint32_t WoReg; /**< Write only 32-bit register (volatile unsigned int) */
|
|
typedef volatile uint32_t RwReg; /**< Read-Write 32-bit register (volatile unsigned int) */
|
|
#define CAST(type, value) (((type)*)(value))
|
|
#define REG_ACCESS(type, address) (*((type)*)(address)) /**< C code: Register value */
|
|
#else
|
|
#define CAST(type, value) (value)
|
|
#define REG_ACCESS(type, address) (address) /**< Assembly code: Register address */
|
|
#endif
|
|
|
|
/* ************************************************************************** */
|
|
/* CMSIS DEFINITIONS FOR SAM3U1C */
|
|
/* ************************************************************************** */
|
|
/** \addtogroup SAM3U1C_cmsis CMSIS Definitions */
|
|
/*@{*/
|
|
|
|
/**< Interrupt Number Definition */
|
|
typedef enum IRQn
|
|
{
|
|
/****** Cortex-M3 Processor Exceptions Numbers ******************************/
|
|
NonMaskableInt_IRQn = -14, /**< 2 Non Maskable Interrupt */
|
|
MemoryManagement_IRQn = -12, /**< 4 Cortex-M3 Memory Management Interrupt */
|
|
BusFault_IRQn = -11, /**< 5 Cortex-M3 Bus Fault Interrupt */
|
|
UsageFault_IRQn = -10, /**< 6 Cortex-M3 Usage Fault Interrupt */
|
|
SVCall_IRQn = -5, /**< 11 Cortex-M3 SV Call Interrupt */
|
|
DebugMonitor_IRQn = -4, /**< 12 Cortex-M3 Debug Monitor Interrupt */
|
|
PendSV_IRQn = -2, /**< 14 Cortex-M3 Pend SV Interrupt */
|
|
SysTick_IRQn = -1, /**< 15 Cortex-M3 System Tick Interrupt */
|
|
/****** SAM3U1C specific Interrupt Numbers *********************************/
|
|
|
|
SUPC_IRQn = 0, /**< 0 SAM3U1C Supply Controller (SUPC) */
|
|
RSTC_IRQn = 1, /**< 1 SAM3U1C Reset Controller (RSTC) */
|
|
RTC_IRQn = 2, /**< 2 SAM3U1C Real Time Clock (RTC) */
|
|
RTT_IRQn = 3, /**< 3 SAM3U1C Real Time Timer (RTT) */
|
|
WDT_IRQn = 4, /**< 4 SAM3U1C Watchdog Timer (WDT) */
|
|
PMC_IRQn = 5, /**< 5 SAM3U1C Power Management Controller (PMC) */
|
|
EFC0_IRQn = 6, /**< 6 SAM3U1C Enhanced Embedded Flash Controller 0 (EFC0) */
|
|
EFC1_IRQn = 7, /**< 7 SAM3U1C Enhanced Embedded Flash Controller 1 (EFC1) */
|
|
UART_IRQn = 8, /**< 8 SAM3U1C Universal Asynchronous Receiver Transmitter (UART) */
|
|
SMC_IRQn = 9, /**< 9 SAM3U1C Static Memory Controller (SMC) */
|
|
PIOA_IRQn = 10, /**< 10 SAM3U1C Parallel I/O Controller A, (PIOA) */
|
|
PIOB_IRQn = 11, /**< 11 SAM3U1C Parallel I/O Controller B (PIOB) */
|
|
PIOC_IRQn = 12, /**< 12 SAM3U1C Parallel I/O Controller C (PIOC) */
|
|
USART0_IRQn = 13, /**< 13 SAM3U1C USART 0 (USART0) */
|
|
USART1_IRQn = 14, /**< 14 SAM3U1C USART 1 (USART1) */
|
|
USART2_IRQn = 15, /**< 15 SAM3U1C USART 2 (USART2) */
|
|
USART3_IRQn = 16, /**< 16 SAM3U1C USART 3 (USART3) */
|
|
HSMCI_IRQn = 17, /**< 17 SAM3U1C High Speed Multimedia Card Interface (HSMCI) */
|
|
TWI0_IRQn = 18, /**< 18 SAM3U1C Two-Wire Interface 0 (TWI0) */
|
|
TWI1_IRQn = 19, /**< 19 SAM3U1C Two-Wire Interface 1 (TWI1) */
|
|
SPI_IRQn = 20, /**< 20 SAM3U1C Serial Peripheral Interface (SPI) */
|
|
SSC_IRQn = 21, /**< 21 SAM3U1C Synchronous Serial Controller (SSC) */
|
|
TC0_IRQn = 22, /**< 22 SAM3U1C Timer Counter 0 (TC0) */
|
|
TC1_IRQn = 23, /**< 23 SAM3U1C Timer Counter 1 (TC1) */
|
|
TC2_IRQn = 24, /**< 24 SAM3U1C Timer Counter 2 (TC2) */
|
|
PWM_IRQn = 25, /**< 25 SAM3U1C Pulse Width Modulation Controller (PWM) */
|
|
ADC12B_IRQn = 26, /**< 26 SAM3U1C 12-bit ADC Controller (ADC12B) */
|
|
ADC_IRQn = 27, /**< 27 SAM3U1C 10-bit ADC Controller (ADC) */
|
|
DMAC_IRQn = 28, /**< 28 SAM3U1C DMA Controller (DMAC) */
|
|
UDPHS_IRQn = 29 /**< 29 SAM3U1C USB Device High Speed (UDPHS) */
|
|
} IRQn_Type;
|
|
|
|
/**
|
|
* \brief Configuration of the Cortex-M3 Processor and Core Peripherals
|
|
*/
|
|
|
|
#define __MPU_PRESENT 1 /**< SAM3U1C does provide a MPU */
|
|
#define __NVIC_PRIO_BITS 4 /**< SAM3U1C uses 4 Bits for the Priority Levels */
|
|
#define __Vendor_SysTickConfig 0 /**< Set to 1 if different SysTick Config is used */
|
|
|
|
/*
|
|
* \brief CMSIS includes
|
|
*/
|
|
|
|
#include <core_cm3.h>
|
|
|
|
/*@}*/
|
|
|
|
/* ************************************************************************** */
|
|
/** SOFTWARE PERIPHERAL API DEFINITION FOR SAM3U1C */
|
|
/* ************************************************************************** */
|
|
/** \addtogroup SAM3U1C_api Peripheral Software API */
|
|
/*@{*/
|
|
|
|
#include "component/ADC.h"
|
|
#include "component/ADC12B.h"
|
|
#include "component/CHIPID.h"
|
|
#include "component/DMAC.h"
|
|
#include "component/EFC.h"
|
|
#include "component/GPBR.h"
|
|
#include "component/HSMCI.h"
|
|
#include "component/MATRIX.h"
|
|
#include "component/PDC.h"
|
|
#include "component/PIO.h"
|
|
#include "component/PMC.h"
|
|
#include "component/PWM.h"
|
|
#include "component/RSTC.h"
|
|
#include "component/RTC.h"
|
|
#include "component/RTT.h"
|
|
#include "component/SMC.h"
|
|
#include "component/SPI.h"
|
|
#include "component/SSC.h"
|
|
#include "component/SUPC.h"
|
|
#include "component/TC.h"
|
|
#include "component/TWI.h"
|
|
#include "component/UART.h"
|
|
#include "component/UDPHS.h"
|
|
#include "component/USART.h"
|
|
#include "component/WDT.h"
|
|
/*@}*/
|
|
|
|
/* ************************************************************************** */
|
|
/* REGISTER ACCESS DEFINITIONS FOR SAM3U1C */
|
|
/* ************************************************************************** */
|
|
/** \addtogroup SAM3U1C_reg Registers Access Definitions */
|
|
/*@{*/
|
|
|
|
#include "instance/HSMCI.h"
|
|
#include "instance/SSC.h"
|
|
#include "instance/SPI.h"
|
|
#include "instance/TC0.h"
|
|
#include "instance/TWI0.h"
|
|
#include "instance/TWI1.h"
|
|
#include "instance/PWM.h"
|
|
#include "instance/USART0.h"
|
|
#include "instance/USART1.h"
|
|
#include "instance/USART2.h"
|
|
#include "instance/UDPHS.h"
|
|
#include "instance/ADC12B.h"
|
|
#include "instance/ADC.h"
|
|
#include "instance/DMAC.h"
|
|
#include "instance/SMC.h"
|
|
#include "instance/MATRIX.h"
|
|
#include "instance/PMC.h"
|
|
#include "instance/UART.h"
|
|
#include "instance/CHIPID.h"
|
|
#include "instance/EFC0.h"
|
|
#include "instance/EFC1.h"
|
|
#include "instance/PIOA.h"
|
|
#include "instance/PIOB.h"
|
|
#include "instance/RSTC.h"
|
|
#include "instance/SUPC.h"
|
|
#include "instance/RTT.h"
|
|
#include "instance/WDT.h"
|
|
#include "instance/RTC.h"
|
|
#include "instance/GPBR.h"
|
|
/*@}*/
|
|
|
|
/* ************************************************************************** */
|
|
/* PERIPHERAL ID DEFINITIONS FOR SAM3U1C */
|
|
/* ************************************************************************** */
|
|
/** \addtogroup SAM3U1C_id Peripheral Ids Definitions */
|
|
/*@{*/
|
|
|
|
#define ID_SUPC ( 0) /**< \brief Supply Controller (SUPC) */
|
|
#define ID_RSTC ( 1) /**< \brief Reset Controller (RSTC) */
|
|
#define ID_RTC ( 2) /**< \brief Real Time Clock (RTC) */
|
|
#define ID_RTT ( 3) /**< \brief Real Time Timer (RTT) */
|
|
#define ID_WDT ( 4) /**< \brief Watchdog Timer (WDT) */
|
|
#define ID_PMC ( 5) /**< \brief Power Management Controller (PMC) */
|
|
#define ID_EFC0 ( 6) /**< \brief Enhanced Embedded Flash Controller 0 (EFC0) */
|
|
#define ID_EFC1 ( 7) /**< \brief Enhanced Embedded Flash Controller 1 (EFC1) */
|
|
#define ID_UART ( 8) /**< \brief Universal Asynchronous Receiver Transmitter (UART) */
|
|
#define ID_SMC ( 9) /**< \brief Static Memory Controller (SMC) */
|
|
#define ID_PIOA (10) /**< \brief Parallel I/O Controller A, (PIOA) */
|
|
#define ID_PIOB (11) /**< \brief Parallel I/O Controller B (PIOB) */
|
|
#define ID_PIOC (12) /**< \brief Parallel I/O Controller C (PIOC) */
|
|
#define ID_USART0 (13) /**< \brief USART 0 (USART0) */
|
|
#define ID_USART1 (14) /**< \brief USART 1 (USART1) */
|
|
#define ID_USART2 (15) /**< \brief USART 2 (USART2) */
|
|
#define ID_USART3 (16) /**< \brief USART 3 (USART3) */
|
|
#define ID_HSMCI (17) /**< \brief High Speed Multimedia Card Interface (HSMCI) */
|
|
#define ID_TWI0 (18) /**< \brief Two-Wire Interface 0 (TWI0) */
|
|
#define ID_TWI1 (19) /**< \brief Two-Wire Interface 1 (TWI1) */
|
|
#define ID_SPI (20) /**< \brief Serial Peripheral Interface (SPI) */
|
|
#define ID_SSC (21) /**< \brief Synchronous Serial Controller (SSC) */
|
|
#define ID_TC0 (22) /**< \brief Timer Counter 0 (TC0) */
|
|
#define ID_TC1 (23) /**< \brief Timer Counter 1 (TC1) */
|
|
#define ID_TC2 (24) /**< \brief Timer Counter 2 (TC2) */
|
|
#define ID_PWM (25) /**< \brief Pulse Width Modulation Controller (PWM) */
|
|
#define ID_ADC12B (26) /**< \brief 12-bit ADC Controller (ADC12B) */
|
|
#define ID_ADC (27) /**< \brief 10-bit ADC Controller (ADC) */
|
|
#define ID_DMAC (28) /**< \brief DMA Controller (DMAC) */
|
|
#define ID_UDPHS (29) /**< \brief USB Device High Speed (UDPHS) */
|
|
/*@}*/
|
|
|
|
/* ************************************************************************** */
|
|
/* BASE ADDRESS DEFINITIONS FOR SAM3U1C */
|
|
/* ************************************************************************** */
|
|
/** \addtogroup SAM3U1C_base Peripheral Base Address Definitions */
|
|
/*@{*/
|
|
|
|
#define HSMCI CAST(Hsmci , 0x40000000U) /**< \brief (HSMCI ) Base Address */
|
|
#define SSC CAST(Ssc , 0x40004000U) /**< \brief (SSC ) Base Address */
|
|
#define SPI CAST(Spi , 0x40008000U) /**< \brief (SPI ) Base Address */
|
|
#define TC0 CAST(Tc , 0x40080000U) /**< \brief (TC0 ) Base Address */
|
|
#define TWI0 CAST(Twi , 0x40084000U) /**< \brief (TWI0 ) Base Address */
|
|
#define PDC_TWI0 CAST(Pdc , 0x40084100U) /**< \brief (PDC_TWI0 ) Base Address */
|
|
#define TWI1 CAST(Twi , 0x40088000U) /**< \brief (TWI1 ) Base Address */
|
|
#define PDC_TWI1 CAST(Pdc , 0x40088100U) /**< \brief (PDC_TWI1 ) Base Address */
|
|
#define PWM CAST(Pwm , 0x4008C000U) /**< \brief (PWM ) Base Address */
|
|
#define PDC_PWM CAST(Pdc , 0x4008C100U) /**< \brief (PDC_PWM ) Base Address */
|
|
#define USART0 CAST(Usart , 0x40090000U) /**< \brief (USART0 ) Base Address */
|
|
#define PDC_USART0 CAST(Pdc , 0x40090100U) /**< \brief (PDC_USART0) Base Address */
|
|
#define USART1 CAST(Usart , 0x40094000U) /**< \brief (USART1 ) Base Address */
|
|
#define PDC_USART1 CAST(Pdc , 0x40094100U) /**< \brief (PDC_USART1) Base Address */
|
|
#define USART2 CAST(Usart , 0x40098000U) /**< \brief (USART2 ) Base Address */
|
|
#define PDC_USART2 CAST(Pdc , 0x40098100U) /**< \brief (PDC_USART2) Base Address */
|
|
#define UDPHS CAST(Udphs , 0x400A4000U) /**< \brief (UDPHS ) Base Address */
|
|
#define ADC12B CAST(Adc12b , 0x400A8000U) /**< \brief (ADC12B ) Base Address */
|
|
#define PDC_ADC12B CAST(Pdc , 0x400A8100U) /**< \brief (PDC_ADC12B) Base Address */
|
|
#define ADC CAST(Adc , 0x400AC000U) /**< \brief (ADC ) Base Address */
|
|
#define PDC_ADC CAST(Pdc , 0x400AC100U) /**< \brief (PDC_ADC ) Base Address */
|
|
#define DMAC CAST(Dmac , 0x400B0000U) /**< \brief (DMAC ) Base Address */
|
|
#define SMC CAST(Smc , 0x400E0000U) /**< \brief (SMC ) Base Address */
|
|
#define MATRIX CAST(Matrix , 0x400E0200U) /**< \brief (MATRIX ) Base Address */
|
|
#define PMC CAST(Pmc , 0x400E0400U) /**< \brief (PMC ) Base Address */
|
|
#define UART CAST(Uart , 0x400E0600U) /**< \brief (UART ) Base Address */
|
|
#define PDC_UART CAST(Pdc , 0x400E0700U) /**< \brief (PDC_UART ) Base Address */
|
|
#define CHIPID CAST(Chipid , 0x400E0740U) /**< \brief (CHIPID ) Base Address */
|
|
#define EFC0 CAST(Efc , 0x400E0800U) /**< \brief (EFC0 ) Base Address */
|
|
#define EFC1 CAST(Efc , 0x400E0A00U) /**< \brief (EFC1 ) Base Address */
|
|
#define PIOA CAST(Pio , 0x400E0C00U) /**< \brief (PIOA ) Base Address */
|
|
#define PIOB CAST(Pio , 0x400E0E00U) /**< \brief (PIOB ) Base Address */
|
|
#define RSTC CAST(Rstc , 0x400E1200U) /**< \brief (RSTC ) Base Address */
|
|
#define SUPC CAST(Supc , 0x400E1210U) /**< \brief (SUPC ) Base Address */
|
|
#define RTT CAST(Rtt , 0x400E1230U) /**< \brief (RTT ) Base Address */
|
|
#define WDT CAST(Wdt , 0x400E1250U) /**< \brief (WDT ) Base Address */
|
|
#define RTC CAST(Rtc , 0x400E1260U) /**< \brief (RTC ) Base Address */
|
|
#define GPBR CAST(Gpbr , 0x400E1290U) /**< \brief (GPBR ) Base Address */
|
|
/*@}*/
|
|
|
|
/* ************************************************************************** */
|
|
/* PIO DEFINITIONS FOR SAM3U1C */
|
|
/* ************************************************************************** */
|
|
/** \addtogroup SAM3U1C_pio Peripheral Pio Definitions */
|
|
/*@{*/
|
|
|
|
#include "pio/SAM3U1C.h"
|
|
/*@}*/
|
|
|
|
/* ************************************************************************** */
|
|
/* MEMORY MAPPING DEFINITIONS FOR SAM3U1C */
|
|
/* ************************************************************************** */
|
|
|
|
#define IFLASH_SIZE 0x10000
|
|
#define IFLASH_PAGE_SIZE 256
|
|
#define IFLASH_LOCK_REGION_SIZE 8192
|
|
#define IFLASH_NB_OF_PAGES 32
|
|
#define IRAM_SIZE 0x5000
|
|
|
|
#define IFLASH0_ADDR (0x00080000u) /**< Internal Flash 0 base address */
|
|
#if defined IFLASH0_SIZE
|
|
#define IFLASH1_ADDR (IFLASH0_ADDR+IFLASH0_SIZE) /**< Internal Flash 1 base address */
|
|
#endif
|
|
#define IROM_ADDR (0x00180000u) /**< Internal ROM base address */
|
|
#define IRAM0_ADDR (0x20000000u) /**< Internal RAM 0 base address */
|
|
#define IRAM1_ADDR (0x20080000u) /**< Internal RAM 1 base address */
|
|
#define NFC_RAM_ADDR (0x20100000u) /**< NAND Flash Controller RAM base address */
|
|
#define UDPHS_RAM_ADDR (0x20180000u) /**< USB High Speed Device Port RAM base address */
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
/*@}*/
|
|
|
|
#endif /* _SAM3U1C_ */
|