mirror of
https://github.com/arduino/Arduino.git
synced 2024-12-01 12:24:14 +01:00
133 lines
3.8 KiB
C++
133 lines
3.8 KiB
C++
/*
|
|
Web Server
|
|
|
|
A simple web server that shows the value of the analog input pins.
|
|
using a WiFi shield.
|
|
|
|
This example is written for a network using WPA encryption. For
|
|
WEP or WPA, change the Wifi.begin() call accordingly.
|
|
|
|
Circuit:
|
|
* WiFi shield attached
|
|
* Analog inputs attached to pins A0 through A5 (optional)
|
|
|
|
created 13 July 2010
|
|
by dlf (Metodo2 srl)
|
|
modified 31 May 2012
|
|
by Tom Igoe
|
|
*/
|
|
#include <SPI.h>
|
|
#include <WiFi.h>
|
|
|
|
|
|
char ssid[] = "yourNetwork"; // your network SSID (name)
|
|
char pass[] = "secretPassword"; // your network password
|
|
int keyIndex = 0; // your network key Index number (needed only for WEP)
|
|
|
|
int status = WL_IDLE_STATUS;
|
|
|
|
WiFiServer server(80);
|
|
|
|
void setup() {
|
|
//Initialize serial and wait for port to open:
|
|
Serial.begin(9600);
|
|
while (!Serial) {
|
|
; // wait for serial port to connect. Needed for Leonardo only
|
|
}
|
|
|
|
// check for the presence of the shield:
|
|
if (WiFi.status() == WL_NO_SHIELD) {
|
|
Serial.println("WiFi shield not present");
|
|
// don't continue:
|
|
while(true);
|
|
}
|
|
|
|
// attempt to connect to Wifi network:
|
|
while ( status != WL_CONNECTED) {
|
|
Serial.print("Attempting to connect to SSID: ");
|
|
Serial.println(ssid);
|
|
// Connect to WPA/WPA2 network. Change this line if using open or WEP network:
|
|
status = WiFi.begin(ssid, pass);
|
|
|
|
// wait 10 seconds for connection:
|
|
delay(10000);
|
|
}
|
|
server.begin();
|
|
// you're connected now, so print out the status:
|
|
printWifiStatus();
|
|
}
|
|
|
|
|
|
void loop() {
|
|
// listen for incoming clients
|
|
WiFiClient client = server.available();
|
|
if (client) {
|
|
Serial.println("new client");
|
|
// an http request ends with a blank line
|
|
boolean currentLineIsBlank = true;
|
|
while (client.connected()) {
|
|
if (client.available()) {
|
|
char c = client.read();
|
|
Serial.write(c);
|
|
// if you've gotten to the end of the line (received a newline
|
|
// character) and the line is blank, the http request has ended,
|
|
// so you can send a reply
|
|
if (c == '\n' && currentLineIsBlank) {
|
|
// send a standard http response header
|
|
client.println("HTTP/1.1 200 OK");
|
|
client.println("Content-Type: text/html");
|
|
client.println("Connnection: close");
|
|
client.println();
|
|
client.println("<!DOCTYPE HTML>");
|
|
client.println("<html>");
|
|
// add a meta refresh tag, so the browser pulls again every 5 seconds:
|
|
client.println("<meta http-equiv=\"refresh\" content=\"5\">");
|
|
// output the value of each analog input pin
|
|
for (int analogChannel = 0; analogChannel < 6; analogChannel++) {
|
|
int sensorReading = analogRead(analogChannel);
|
|
client.print("analog input ");
|
|
client.print(analogChannel);
|
|
client.print(" is ");
|
|
client.print(sensorReading);
|
|
client.println("<br />");
|
|
}
|
|
client.println("</html>");
|
|
break;
|
|
}
|
|
if (c == '\n') {
|
|
// you're starting a new line
|
|
currentLineIsBlank = true;
|
|
}
|
|
else if (c != '\r') {
|
|
// you've gotten a character on the current line
|
|
currentLineIsBlank = false;
|
|
}
|
|
}
|
|
}
|
|
// give the web browser time to receive the data
|
|
delay(1);
|
|
// close the connection:
|
|
client.stop();
|
|
Serial.println("client disonnected");
|
|
}
|
|
}
|
|
|
|
|
|
void printWifiStatus() {
|
|
// print the SSID of the network you're attached to:
|
|
Serial.print("SSID: ");
|
|
Serial.println(WiFi.SSID());
|
|
|
|
// print your WiFi shield's IP address:
|
|
IPAddress ip = WiFi.localIP();
|
|
Serial.print("IP Address: ");
|
|
Serial.println(ip);
|
|
|
|
// print the received signal strength:
|
|
long rssi = WiFi.RSSI();
|
|
Serial.print("signal strength (RSSI):");
|
|
Serial.print(rssi);
|
|
Serial.println(" dBm");
|
|
}
|
|
|