mirror of
https://github.com/arduino/Arduino.git
synced 2024-11-30 11:24:12 +01:00
ccd8880a37
When interrupts are disabled, writing to HardwareSerial could cause a lockup. When the tx buffer is full, a busy-wait loop is used to wait for the interrupt handler to free up a byte in the buffer. However, when interrupts are disabled, this will of course never happen and the Arduino will lock up. This often caused lockups when doing (big) debug printing from an interrupt handler. Additionally, calling flush() with interrupts disabled while transmission was in progress would also cause a lockup. When interrupts are disabled, the code now actively checks the UDRE (UART Data Register Empty) and calls the interrupt handler to free up room if the bit is set. This can lead to delays in interrupt handlers when the serial buffer is full, but a delay is of course always preferred to a lockup. Closes: #672 References: #1147 |
||
|---|---|---|
| .. | ||
| bootloaders | ||
| cores/arduino | ||
| firmwares | ||
| libraries | ||
| variants | ||
| boards.txt | ||
| platform.txt | ||
| programmers.txt | ||