mirror of
https://github.com/arduino/Arduino.git
synced 2024-12-01 12:24:14 +01:00
50 lines
1.3 KiB
Plaintext
50 lines
1.3 KiB
Plaintext
/*
|
|
MIDI note player
|
|
|
|
This sketch shows how to use the serial transmit pin (pin 1) to send MIDI note data.
|
|
If this circuit is connected to a MIDI synth, it will play
|
|
the notes F#-0 (0x1E) to F#-5 (0x5A) in sequence.
|
|
|
|
|
|
The circuit:
|
|
* digital in 1 connected to MIDI jack pin 5
|
|
* MIDI jack pin 2 connected to ground
|
|
* MIDI jack pin 4 connected to +5V through 220-ohm resistor
|
|
Attach a MIDI cable to the jack, then to a MIDI synth, and play music.
|
|
|
|
created 13 Jun 2006
|
|
modified 2 Jul 2009
|
|
by Tom Igoe
|
|
|
|
This example code is in the public domain.
|
|
|
|
http://www.arduino.cc/en/Tutorial/MIDI
|
|
|
|
*/
|
|
|
|
void setup() {
|
|
// Set MIDI baud rate:
|
|
Serial.begin(31250);
|
|
}
|
|
|
|
void loop() {
|
|
// play notes from F#-0 (0x1E) to F#-5 (0x5A):
|
|
for (intnote = 0x1E; note < 0x5A; note ++) {
|
|
//Note on channel 1 (0x90), some note value (note), middle velocity (0x45):
|
|
noteOn(0x90, note, 0x45);
|
|
delay(100);
|
|
//Note on channel 1 (0x90), some note value (note), silent velocity (0x00):
|
|
noteOn(0x90, note, 0x00);
|
|
delay(100);
|
|
}
|
|
}
|
|
|
|
// plays a MIDI note. Doesn't check to see that
|
|
// cmd is greater than 127, or that data values are less than 127:
|
|
void noteOn(int cmd, int pitch, int velocity) {
|
|
Serial.print(cmd, BYTE);
|
|
Serial.print(pitch, BYTE);
|
|
Serial.print(velocity, BYTE);
|
|
}
|
|
|