1
0
mirror of https://github.com/arduino/Arduino.git synced 2024-12-12 23:08:52 +01:00
Arduino/hardware/sam/system/libsam/include/pwmc.h

128 lines
5.3 KiB
C

/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file
*
* \par Purpose
*
* Interface for configuration the Pulse Width Modulation Controller (PWM) peripheral.
*
* \par Usage
*
* -# Configures PWM clocks A & B to run at the given frequencies using
* \ref PWMC_ConfigureClocks().
* -# Configure PWMC channel using \ref PWMC_ConfigureChannel(), \ref PWMC_ConfigureChannelExt()
* \ref PWMC_SetPeriod(), \ref PWMC_SetDutyCycle() and \ref PWMC_SetDeadTime().
* -# Enable & disable channel using \ref PWMC_EnableChannel() and
* \ref PWMC_DisableChannel().
* -# Enable & disable the period interrupt for the given PWM channel using
* \ref PWMC_EnableChannelIt() and \ref PWMC_DisableChannelIt().
* -# Enable & disable the selected interrupts sources on a PWMC peripheral
* using \ref PWMC_EnableIt() and \ref PWMC_DisableIt().
* -# Control syncronous channel using \ref PWMC_ConfigureSyncChannel(),
* \ref PWMC_SetSyncChannelUpdatePeriod() and \ref PWMC_SetSyncChannelUpdateUnlock().
* -# Control PWM override output using \ref PWMC_SetOverrideValue(),
* \ref PWMC_EnableOverrideOutput() and \ref PWMC_DisableOverrideOutput().
* -# Send data through the transmitter using \ref PWMC_WriteBuffer().
*
*/
#ifndef _PWMC_
#define _PWMC_
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "chip.h"
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/*----------------------------------------------------------------------------
* Exported functions
*----------------------------------------------------------------------------*/
extern void PWMC_ConfigureChannel(
Pwm* pPwm,
uint8_t channel,
uint32_t prescaler,
uint32_t alignment,
uint32_t polarity);
extern void PWMC_ConfigureChannelExt(
Pwm* pPwm,
uint8_t channel,
uint32_t prescaler,
uint32_t alignment,
uint32_t polarity,
uint32_t countEventSelect,
uint32_t DTEnable,
uint32_t DTHInverte,
uint32_t DTLInverte);
extern void PWMC_ConfigureClocks(uint32_t clka, uint32_t clkb, uint32_t mck);
extern void PWMC_SetPeriod( Pwm* pPwm, uint8_t channel, uint16_t period);
extern void PWMC_SetDutyCycle( Pwm* pPwm, uint8_t channel, uint16_t duty);
extern void PWMC_SetDeadTime( Pwm* pPwm, uint8_t channel, uint16_t timeH, uint16_t timeL);
extern void PWMC_ConfigureSyncChannel( Pwm* pPwm,
uint32_t channels,
uint32_t updateMode,
uint32_t requestMode,
uint32_t requestComparisonSelect);
extern void PWMC_SetSyncChannelUpdatePeriod( Pwm* pPwm, uint8_t period);
extern void PWMC_SetSyncChannelUpdateUnlock( Pwm* pPwm );
extern void PWMC_EnableChannel( Pwm* pPwm, uint8_t channel);
extern void PWMC_DisableChannel( Pwm* pPwm, uint8_t channel);
extern void PWMC_EnableChannelIt( Pwm* pPwm, uint8_t channel);
extern void PWMC_DisableChannelIt( Pwm* pPwm, uint8_t channel);
extern void PWMC_EnableIt( Pwm* pPwm, uint32_t sources1, uint32_t sources2);
extern void PWMC_DisableIt( Pwm* pPwm, uint32_t sources1, uint32_t sources2);
extern uint8_t PWMC_WriteBuffer(Pwm *pwmc,
void *buffer,
uint32_t length);
extern void PWMC_SetOverrideValue( Pwm* pPwm, uint32_t value);
extern void PWMC_EnableOverrideOutput( Pwm* pPwm, uint32_t value, uint32_t sync);
extern void PWMC_DisableOverrideOutput( Pwm* pPwm, uint32_t value, uint32_t sync);
extern void PWMC_SetFaultMode( Pwm* pPwm, uint32_t mode);
extern void PWMC_FaultClear( Pwm* pPwm, uint32_t fault);
extern void PWMC_SetFaultProtectionValue( Pwm* pPwm, uint32_t value);
extern void PWMC_EnableFaultProtection( Pwm* pPwm, uint32_t value);
extern void PWMC_ConfigureComparisonUnit( Pwm* pPwm, uint32_t x, uint32_t value, uint32_t mode);
extern void PWMC_ConfigureEventLineMode( Pwm* pPwm, uint32_t x, uint32_t mode);
#ifdef __cplusplus
}
#endif
#endif /* #ifndef _PWMC_ */