1
0
mirror of https://github.com/arduino/Arduino.git synced 2024-12-04 15:24:12 +01:00
Arduino/hardware/arduino/avr/firmwares/atmegaxxu2/arduino-usbdfu
2012-10-18 16:01:53 +02:00
..
Board Moved 'firmware' folder in the proper place 2012-10-18 16:01:53 +02:00
Arduino-usbdfu.c Moved 'firmware' folder in the proper place 2012-10-18 16:01:53 +02:00
Arduino-usbdfu.h Moved 'firmware' folder in the proper place 2012-10-18 16:01:53 +02:00
Descriptors.c Moved 'firmware' folder in the proper place 2012-10-18 16:01:53 +02:00
Descriptors.h Moved 'firmware' folder in the proper place 2012-10-18 16:01:53 +02:00
makefile Moved 'firmware' folder in the proper place 2012-10-18 16:01:53 +02:00
readme.txt Moved 'firmware' folder in the proper place 2012-10-18 16:01:53 +02:00

To setup the project and program an ATMEG8U2 with the Arduino USB DFU bootloader:
1. unpack the source into LUFA's Bootloader directory
2. set ARDUINO_MODEL_PID in the makefile as appropriate 
3. do "make clean; make; make program"

Check that the board enumerates as either "Arduino Uno DFU" or "Arduino Mega 2560 DFU".  Test by uploading the Arduino-usbserial application firmware (see instructions in Arduino-usbserial directory)