mirror of
https://github.com/arduino/Arduino.git
synced 2024-12-13 23:48:46 +01:00
9eaea4205d
According to #3786 removed the reference to Leonardo only in while(!Serial) of the examples. Changed in in "wait for serial port to connect. Needed for native USB port only"
56 lines
1.3 KiB
C++
56 lines
1.3 KiB
C++
/*
|
|
Software serial multple serial test
|
|
|
|
Receives from the hardware serial, sends to software serial.
|
|
Receives from software serial, sends to hardware serial.
|
|
|
|
The circuit:
|
|
* RX is digital pin 10 (connect to TX of other device)
|
|
* TX is digital pin 11 (connect to RX of other device)
|
|
|
|
Note:
|
|
Not all pins on the Mega and Mega 2560 support change interrupts,
|
|
so only the following can be used for RX:
|
|
10, 11, 12, 13, 50, 51, 52, 53, 62, 63, 64, 65, 66, 67, 68, 69
|
|
|
|
Not all pins on the Leonardo support change interrupts,
|
|
so only the following can be used for RX:
|
|
8, 9, 10, 11, 14 (MISO), 15 (SCK), 16 (MOSI).
|
|
|
|
created back in the mists of time
|
|
modified 25 May 2012
|
|
by Tom Igoe
|
|
based on Mikal Hart's example
|
|
|
|
This example code is in the public domain.
|
|
|
|
*/
|
|
#include <SoftwareSerial.h>
|
|
|
|
SoftwareSerial mySerial(10, 11); // RX, TX
|
|
|
|
void setup() {
|
|
// Open serial communications and wait for port to open:
|
|
Serial.begin(57600);
|
|
while (!Serial) {
|
|
; // wait for serial port to connect. Needed for native USB port only
|
|
}
|
|
|
|
|
|
Serial.println("Goodnight moon!");
|
|
|
|
// set the data rate for the SoftwareSerial port
|
|
mySerial.begin(4800);
|
|
mySerial.println("Hello, world?");
|
|
}
|
|
|
|
void loop() { // run over and over
|
|
if (mySerial.available()) {
|
|
Serial.write(mySerial.read());
|
|
}
|
|
if (Serial.available()) {
|
|
mySerial.write(Serial.read());
|
|
}
|
|
}
|
|
|