rooty/DataTables
1
0
Fork 0
mirror of https://github.com/DataTables/DataTables.git synced 2024-12-01 13:24:10 +01:00
Code Issues Releases Activity
74e37c13fe
DataTables/examples/ajax/data/arrays_subobjects.txt

688 lines
18 KiB
Plaintext
Raw Normal View History

New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
{
"data": [
{
"0": "Tiger Nixon",
"hr": {
"position": "System Architect",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$320,800",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2011\/04\/25"
},
"contact": {
"office": "Edinburgh",
"extn": "5421"
}
},
{
"0": "Garrett Winters",
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Accountant",
"salary": "$170,750",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2011\/07\/25"
},
"contact": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"office": "Tokyo",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"extn": "8422"
}
},
{
"0": "Ashton Cox",
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Junior Technical Author",
"salary": "$86,000",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2009\/01\/12"
},
"contact": {
"office": "San Francisco",
"extn": "1562"
}
},
{
"0": "Cedric Kelly",
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Senior Javascript Developer",
"salary": "$433,060",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2012\/03\/29"
},
"contact": {
"office": "Edinburgh",
"extn": "6224"
}
},
{
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"0": "Airi Satou",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Accountant",
"salary": "$162,700",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2008\/11\/28"
},
"contact": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"office": "Tokyo",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"extn": "5407"
}
},
{
"0": "Brielle Williamson",
"hr": {
"position": "Integration Specialist",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$372,000",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2012\/12\/02"
},
"contact": {
"office": "New York",
"extn": "4804"
}
},
{
"0": "Herrod Chandler",
"hr": {
"position": "Sales Assistant",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$137,500",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2012\/08\/06"
},
"contact": {
"office": "San Francisco",
"extn": "9608"
}
},
{
"0": "Rhona Davidson",
"hr": {
"position": "Integration Specialist",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$327,900",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2010\/10\/14"
},
"contact": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"office": "Tokyo",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"extn": "6200"
}
},
{
"0": "Colleen Hurst",
"hr": {
"position": "Javascript Developer",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$205,500",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2009\/09\/15"
},
"contact": {
"office": "San Francisco",
"extn": "2360"
}
},
{
"0": "Sonya Frost",
"hr": {
"position": "Software Engineer",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$103,600",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2008\/12\/13"
},
"contact": {
"office": "Edinburgh",
"extn": "1667"
}
},
{
"0": "Jena Gaines",
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Office Manager",
"salary": "$90,560",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2008\/12\/19"
},
"contact": {
"office": "London",
"extn": "3814"
}
},
{
"0": "Quinn Flynn",
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Support Lead",
"salary": "$342,000",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2013\/03\/03"
},
"contact": {
"office": "Edinburgh",
"extn": "9497"
}
},
{
"0": "Charde Marshall",
"hr": {
"position": "Regional Director",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$470,600",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2008\/10\/16"
},
"contact": {
"office": "San Francisco",
"extn": "6741"
}
},
{
"0": "Haley Kennedy",
"hr": {
"position": "Senior Marketing Designer",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$313,500",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2012\/12\/18"
},
"contact": {
"office": "London",
"extn": "3597"
}
},
{
"0": "Tatyana Fitzpatrick",
"hr": {
"position": "Regional Director",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$385,750",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2010\/03\/17"
},
"contact": {
"office": "London",
"extn": "1965"
}
},
{
"0": "Michael Silva",
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Marketing Designer",
"salary": "$198,500",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2012\/11\/27"
},
"contact": {
"office": "London",
"extn": "1581"
}
},
{
"0": "Paul Byrd",
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Chief Financial Officer (CFO)",
"salary": "$725,000",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2010\/06\/09"
},
"contact": {
"office": "New York",
"extn": "3059"
}
},
{
"0": "Gloria Little",
"hr": {
"position": "Systems Administrator",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$237,500",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2009\/04\/10"
},
"contact": {
"office": "New York",
"extn": "1721"
}
},
{
"0": "Bradley Greer",
"hr": {
"position": "Software Engineer",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$132,000",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2012\/10\/13"
},
"contact": {
"office": "London",
"extn": "2558"
}
},
{
"0": "Dai Rios",
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Personnel Lead",
"salary": "$217,500",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2012\/09\/26"
},
"contact": {
"office": "Edinburgh",
"extn": "2290"
}
},
{
"0": "Jenette Caldwell",
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Development Lead",
"salary": "$345,000",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2011\/09\/03"
},
"contact": {
"office": "New York",
"extn": "1937"
}
},
{
"0": "Yuri Berry",
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Chief Marketing Officer (CMO)",
"salary": "$675,000",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2009\/06\/25"
},
"contact": {
"office": "New York",
"extn": "6154"
}
},
{
"0": "Caesar Vance",
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Pre-Sales Support",
"salary": "$106,450",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2011\/12\/12"
},
"contact": {
"office": "New York",
"extn": "8330"
}
},
{
"0": "Doris Wilder",
"hr": {
"position": "Sales Assistant",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$85,600",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2010\/09\/20"
},
"contact": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"office": "Sidney",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"extn": "3023"
}
},
{
"0": "Angelica Ramos",
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Chief Executive Officer (CEO)",
"salary": "$1,200,000",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2009\/10\/09"
},
"contact": {
"office": "London",
"extn": "5797"
}
},
{
"0": "Gavin Joyce",
"hr": {
"position": "Developer",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$92,575",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2010\/12\/22"
},
"contact": {
"office": "Edinburgh",
"extn": "8822"
}
},
{
"0": "Jennifer Chang",
"hr": {
"position": "Regional Director",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$357,650",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2010\/11\/14"
},
"contact": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"office": "Singapore",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"extn": "9239"
}
},
{
"0": "Brenden Wagner",
"hr": {
"position": "Software Engineer",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$206,850",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2011\/06\/07"
},
"contact": {
"office": "San Francisco",
"extn": "1314"
}
},
{
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"0": "Fiona Green",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Chief Operating Officer (COO)",
"salary": "$850,000",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2010\/03\/11"
},
"contact": {
"office": "San Francisco",
"extn": "2947"
}
},
{
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"0": "Shou Itou",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Regional Marketing",
"salary": "$163,000",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2011\/08\/14"
},
"contact": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"office": "Tokyo",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"extn": "8899"
}
},
{
"0": "Michelle House",
"hr": {
"position": "Integration Specialist",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$95,400",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2011\/06\/02"
},
"contact": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"office": "Sidney",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"extn": "2769"
}
},
{
"0": "Suki Burks",
"hr": {
"position": "Developer",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$114,500",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2009\/10\/22"
},
"contact": {
"office": "London",
"extn": "6832"
}
},
{
"0": "Prescott Bartlett",
"hr": {
"position": "Technical Author",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$145,000",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2011\/05\/07"
},
"contact": {
"office": "London",
"extn": "3606"
}
},
{
"0": "Gavin Cortez",
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Team Leader",
"salary": "$235,500",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2008\/10\/26"
},
"contact": {
"office": "San Francisco",
"extn": "2860"
}
},
{
"0": "Martena Mccray",
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Post-Sales support",
"salary": "$324,050",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2011\/03\/09"
},
"contact": {
"office": "Edinburgh",
"extn": "8240"
}
},
{
"0": "Unity Butler",
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Marketing Designer",
"salary": "$85,675",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2009\/12\/09"
},
"contact": {
"office": "San Francisco",
"extn": "5384"
}
},
{
"0": "Howard Hatfield",
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Office Manager",
"salary": "$164,500",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2008\/12\/16"
},
"contact": {
"office": "San Francisco",
"extn": "7031"
}
},
{
"0": "Hope Fuentes",
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Secretary",
"salary": "$109,850",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2010\/02\/12"
},
"contact": {
"office": "San Francisco",
"extn": "6318"
}
},
{
"0": "Vivian Harrell",
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Financial Controller",
"salary": "$452,500",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2009\/02\/14"
},
"contact": {
"office": "San Francisco",
"extn": "9422"
}
},
{
"0": "Timothy Mooney",
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Office Manager",
"salary": "$136,200",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2008\/12\/11"
},
"contact": {
"office": "London",
"extn": "7580"
}
},
{
"0": "Jackson Bradshaw",
"hr": {
"position": "Director",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$645,750",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2008\/09\/26"
},
"contact": {
"office": "New York",
"extn": "1042"
}
},
{
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"0": "Olivia Liang",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"hr": {
"position": "Support Engineer",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$234,500",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2011\/02\/03"
},
"contact": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"office": "Singapore",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"extn": "2120"
}
},
{
"0": "Bruno Nash",
"hr": {
"position": "Software Engineer",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$163,500",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2011\/05\/03"
},
"contact": {
"office": "London",
"extn": "6222"
}
},
{
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"0": "Sakura Yamamoto",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"hr": {
"position": "Support Engineer",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$139,575",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2009\/08\/19"
},
"contact": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"office": "Tokyo",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"extn": "9383"
}
},
{
"0": "Thor Walton",
"hr": {
"position": "Developer",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$98,540",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2013\/08\/11"
},
"contact": {
"office": "New York",
"extn": "8327"
}
},
{
"0": "Finn Camacho",
"hr": {
"position": "Support Engineer",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$87,500",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2009\/07\/07"
},
"contact": {
"office": "San Francisco",
"extn": "2927"
}
},
{
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"0": "Serge Baldwin",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"hr": {
"position": "Data Coordinator",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$138,575",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2012\/04\/09"
},
"contact": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"office": "Singapore",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"extn": "8352"
}
},
{
"0": "Zenaida Frank",
"hr": {
"position": "Software Engineer",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$125,250",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2010\/01\/04"
},
"contact": {
"office": "New York",
"extn": "7439"
}
},
{
"0": "Zorita Serrano",
"hr": {
"position": "Software Engineer",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$115,000",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2012\/06\/01"
},
"contact": {
"office": "San Francisco",
"extn": "4389"
}
},
{
"0": "Jennifer Acosta",
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Junior Javascript Developer",
"salary": "$75,650",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2013\/02\/01"
},
"contact": {
"office": "Edinburgh",
"extn": "3431"
}
},
{
"0": "Cara Stevens",
"hr": {
"position": "Sales Assistant",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$145,600",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2011\/12\/06"
},
"contact": {
"office": "New York",
"extn": "3990"
}
},
{
"0": "Hermione Butler",
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Regional Director",
"salary": "$356,250",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2011\/03\/21"
},
"contact": {
"office": "London",
"extn": "1016"
}
},
{
"0": "Lael Greer",
"hr": {
"position": "Systems Administrator",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$103,500",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2009\/02\/27"
},
"contact": {
"office": "London",
"extn": "6733"
}
},
{
"0": "Jonas Alexander",
"hr": {
"position": "Developer",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$86,500",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2010\/07\/14"
},
"contact": {
"office": "San Francisco",
"extn": "8196"
}
},
{
"0": "Shad Decker",
"hr": {
"position": "Regional Director",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$183,000",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2008\/11\/13"
},
"contact": {
"office": "Edinburgh",
"extn": "6373"
}
},
{
"0": "Michael Bruce",
"hr": {
"position": "Javascript Developer",
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"salary": "$183,000",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2011\/06\/27"
},
"contact": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"office": "Singapore",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"extn": "5384"
}
},
{
"0": "Donna Snider",
"hr": {
New: `language.decimal` option. This option can be used to tell DataTables which character is used as a decimal place in the table's data, so that number which are formatted using characters other than a dot as the decimal place can be correctly detected and sorted. - A large part of the world uses the comma as a decimal place, so it makes sense to have this option built-in directly to DataTables, rather than needing to use plu-in sorting types as before: http://en.wikipedia.org/wiki/Decimal_mark - However, the decimal place character cannot be detected automatically since there are far to many ambiguities. As such, a new `language.decimal` option is defined which is passed through to the type detection functions. The type detection functions can then use that character to alter their detection functions to transform numbers into the dot formatted equivilent for parsing in Javascript. - The numeric sorting methods have been bundled together in the function `_addNumericSort` which is called when a character is given for the decimal mark, adding the sorting functions required specifically for that mark. This means that any character at all can be added, while keeping the table's sort performance as it was. - Code size in increased a little for this new feature, but a lot of work has been done to keep it to a minimum (while still optimising for the most common use case of a dot decimal place), and this is a good feature to have in DataTables' core code. - All required documentation added and updated. - Special thanks to Tobias Bäthge for suggesting and sponsoring this feature.
2014-02-10 18:07:22 +01:00
"position": "Customer Support",
"salary": "$112,000",
New - examples: Examples updated and restyled for DataTables 1.10 - Additional information and better layout for examples. See the src repo for more information.
2013-10-16 13:13:30 +02:00
"start_date": "2011\/01\/25"
},
"contact": {
"office": "New York",
"extn": "4226"
}
}
]
}
Reference in New Issue Copy Permalink